Wildfires have short- and long-term impacts on the geoenvironment, including the changes to biogeochemical and mechanical properties of soils, landfill stability, surface- and groundwater, air pollution, and vegetation. Climate change has increased the extent and severity of wildfires across the world. Simultaneously, anthropogenic activities—through the expansion of urban areas into wildlands, abandonment of rural practices, and accidental or intentional fire-inception activities—are also responsible for a majority of fires. This paper provides an overall review and critical appraisal of existing knowledge about processes induced by wildfires and their impact on the geoenvironment. Burning of vegetation leads to loss of root reinforcement and changes in soil hydromechanical properties. Also, depending on the fire temperature, soil can be rendered hydrophobic or hydrophilic and compromise soil nutrition levels, hinder revegetation, and, in turn, increase post-fire erosion and the debris flow susceptibility of hillslopes. In addition to direct hazards, wildfires pollute air and soil with smoke and fire suppression agents releasing toxic, persistent, and relatively mobile contaminants into the geoenvironment. Nevertheless, the mitigation of wildfires’ geoenvironmental impacts does not fit within the scope of this paper. In the end, and in no exhaustive way, some of the areas requiring future research are highlighted.
6 August 2019 in Geotechnical and Geological Engineering
Bio-mediated ground improvement is an attractive alternative to traditional admixtures for strength improvement of shallow surfaces because it is environmentally friendly. Since biofilms contain extracellular polymeric substances (EPS), they can be considered as an alternative to current technologies to improve soil strength. EPS containing biofilms are porous materials with charged surfaces, and therefore adsorption and capillary condensation can result in water retention. Currently, most of the literature work only tested soil improvement under the dry condition. Therefore, the influence of water retention by biofilms on the strength of improved soil remains unclear. Our goal is to evaluate the strength of a biofilm-enhanced sand over a wide range of saturations and explain the trends through the suction stress characteristic curve (SSCC), which quantifies interparticle adsorptive, capillary, and cementation forces as a function of saturation. We used homogenized anaerobic granule biofilms from an existing upflow anaerobic sludge blanket reactor and mixed it with sand to test the strength of a poorly-graded sand in a wide range of saturations, S (between 0.02 S and 0.74 S). We found that biofilm treatment of sand increases soil strength through cementation over a wide range of saturations and through adsorptive forces among sand, biofilm surfaces, and water molecules at low saturations (S < ~0.3). Our results suggested that homogenized biofilms mixed with sand can be used to improve the strength of sand over a wide range of saturations.
1 July 2023 in Journal of Geotechnical and Geoenvironmental Engineering
Wildfires and associated wetting-induced slope stability issues (i.e., erosion, shallow landslides, and debris flows) are common problems all around the world. The water-retention mechanism of the burnt soil after a severe wildfire is adsorption followed by capillary condensation as saturation increases. During this time, soil is more susceptible to runoff-dominated erosion and associated debris flows. The water vapor sorption behavior of wildfire-burnt soil and wildfire ash is not fully known. This study investigates the evolution of water vapor sorption behavior of wildfire-burnt soil over a year and the impact of wildfire ash on the sorption behavior of burnt soil. Soil samples were collected from the surface and from 50-cm depth, and ash samples were collected from the surface at varying times after the 2019 Williams Flats Wildfire in Colville Indian Reservation, Washington State. Soil water retention curves of the surface soil and 50-cm soil were measured using a potentiometer. Hysteretic water vapor sorption isotherms were obtained along adsorption and desorption paths using a dynamic water vapor sorption analyzer. Several different parameters including maximum adsorbed water content, degree of hysteresis, specific surface area, and transition relative humidity were calculated from water vapor sorption isotherms and used to evaluate the sorption behavior of wildfire-burnt soil and wildfire ash. The results indicate that (1) wildfire ash is hydrophilic, has an active surface, and contributes to water retention; and (2) spatial redistribution of ash may result in fluctuations in the water retention of burnt soil over time.
Mechanically harvested crops must be erect (lodging resistant) to facilitate harvest. Stem lodging changes canopy structure, increases disease pressure, reduces yield, and reduces harvest efficiency in pea. A number of studies have examined the traits that cause lodging susceptibility, but the...