The emerging smart grid system requires high speed sensing of data from all the sensors on the system within a few power-cycles. The Advanced Metering Infrastructure is a simple example of such a system where all the meters on a certain grid must be able to provide the necessary information to the master head end within a very short duration (fraction of a second for real time load control). Wireless solutions for the smart grid systems have been implemented, but cannot access all grid locations, especially enclosed ones. In this paper, we present an interactive, OFDMA based communication system optimized for operation over the low voltage power lines in the CENELEC bands A and B. A channel model representing statistical time-varying, and frequency selective powergrid channels and noise is presented. Using this model, an OFDMA based transceiver is developed that is capable of providing smart grid like access capacity to the head end connected to multiple meters. The transceiver is optimized based on the channel model and the characteristics derived from the structure of the grid.
Intelligent Transportation System (ITS) is considered to be an integral part of the Smart City concept. As per the idea of ITS, intelligence incorporated in existing vehicles, both private and public, is expected to make vehicle management inexpensive and less complex. Some of the barriers in successful deployment of ITS have been its reliability, scalability, interoperability and security. Communication plays a big role in ITS and Wi-Fi/ cellular technologies have been used to facilitate Car-to-Server (C2S) and Server-to-Server (S2S) type communication. Car-to-Car (C2C) communication emerges as a more resource constrained and challenging model. Due to strict real-time, low delay and high security requirements, C2C presents several avenues for research. In this work, we investigate the network and security concerns of C2C architecture of ITS. Based on our study, we propose an effective approach for C2C communication using event-triggered broadcast of information. We use Public Key Infrastructure (PKI) based sender authentication for information verification. Furthermore, we provide Machine Learning based solutions to some common problems encountered during C2C communication.
23 December 2024 in IEEE Transactions on Network and Service Management
Designing efficient routing protocols for Unmanned Aerial Vehicle (UAV)-assisted communication presents significant challenges due to rapidly changing topology, limited battery capacity, and dynamic network conditions.such as energy consumption, link quality, or latency but often overlook the necessity of an integrated approach considering a broader range of factors. This paper introduces the Improved Q-learning-based Multi-hop Routing (IQMR) algorithm that facilitates energy-efficient, and reliable data transmission in UAV-assisted communication. IQMR achieves this by selecting the optimal next-hop node to ensure efficient energy utilization, reliable packet delivery through collision avoidance, and adaptive network reorganization to maintain connectivity without relying on predefined UAV paths. To the best of our knowledge, IQMR is the first to employ a multi-objective framework that captures the inter-dependencies between network parameters and UAV operational states while leveraging Q(λ) learning to make routing decisions, ensuring reliable communication in dynamic environments. Results show that IQMR demonstrates a 36.35% improvement in energy efficiency and a 32.05% increase in data throughput over existing methods.
Prediction of energy consumption is useful in energy budgeting of smart grids, expenditure budgeting by consumers, and comfort management of smart buildings. Essentially, building management systems of smart buildings need to manage energy, efficiently. In order to do this, energy prediction plays an important role. The energy consumption, in general, is predicted using machine learning algorithms. However, machine learning algorithms demand massive amounts of data for performing well. Acquisition of this data from data owners can lead to privacy breaches. Federated learning is a framework of distributed systems which can mitigate privacy breaches to certain extent. Federated learning has as such been developed for mobile edge devices like vehicles, phones etc. In this paper, a novel application of federated learning framework focused on the smart building energy prediction scenario is presented. The architectural details on how the federated learning framework is applied is presented. Also, the performance of this prediction model as compared to centralized method of machine learning is discussed. Deep neural networks are used with the American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE) dataset to realize and evaluate this architecture.
11 March 2025 in IEEE Transactions on Vehicular Technology
This letter focuses on enhancing target detection performance for a multi-user integrated sensing and communication (ISAC) system using cell-free multiple-input multiple-output (MIMO) technology and orthogonal time frequency space (OTFS) waveform in high-speed vehicular environments. The former helps integrate sensing and communication technologies, whereas the latter enables delay-Doppler processing in which a doubly dispersive channel appears with almost constant and flat frequencies. We propose a sensing-centric (SC) approach for target detection using communication signals with/without sensing signals. Power allocation is optimized to maximize the sensing signal-to-noise ratio (SNR) of the proposed SC scheme while ensuring a required quality-of-service (QoS) for the communication user equipment (UEs), and adhering to each access point's (AP's) power budget. Numerical results show that the proposed SC scheme vastly outperforms a communication-centric method that minimizes the total power consumed at the APs subject to the same constraints.
Internet of Things (IoT) is expected to play a prominent role in the envisioned networked society. In IoT ecosystem, Machine Type Communication (MTC) is the access technology that ensures wireless connectivity for end-user devices to the network. Diverse IoT applications pose conflicting requirements and challenges that must be resolved to fully realize the IoT ecosystem. Although the right access technology to address all these challenges is not available yet, notable progress has been made in the recent times to address most of the key requirements. Extended Coverage (EC)-GSM-IoT and Narrow Band (NB)-IoT have been standardized by 3GPP in Release 13 as the access technologies for IoT. Among non-3GPP community, Long Range (LoRa) has attracted significant attention. In this paper, the suitability of the aforementioned access technologies to various IoT services in terms of the relevant system parameters is explored. We have also identified many system design parameters that will have adverse implications if not configured correctly for the right IoT use case. Important open challenges to be addressed from physical layer (PHY) perspective are highlighted here that will help to realize a truly connected world.