Designing an effective carrier‐transport layer is crucial for achieving highly crystalline silicon (c‐Si) solar cells. MoOX, with its high work function and wide bandgap, is the preferred choice for hole‐transport‐layer (HTL) materials in c‐Si solar cells. However, the limited reflection ability and conductivity of MoOX in the rear contact lead to a decrease in the short‐circuit current of the solar cells. In this study, an ultrathin Au interlayer is inserted between two MoOX layers to construct a MoOX/Au/MoOX (MAM) composite HTL. First, the composite HTL with a high work function (Au) contributes to upward band bending at the c‐Si surface to render excellent hole selectivity. Second, the MAM composite HTL effectively improves the backside reflectance of the devices at long wavelengths. Moreover, the insertion of Au introduces oxygen vacancies into the MAM composite HTL, resulting in a high conductivity of 7.592 × 10−2 S m−1. The conductivity of the MAM composite is an order of magnitude higher than that of single‐layer MoOX, which increases the short‐circuit current density of the corresponding device by 1.7 mA cm−2. Consequently, the MAM‐based solar cells show a power conversion efficiency (PCE) of 22.0%, representing the highest PCE reported for MoOX‐based p‐type c‐Si solar cells.
9 May 2025 in Solar Energy Materials and Solar Cells
PERC solar cell technology, which emerged in the 1980s, has garnered a substantial portion of the PV market over the past decade. However, the main factors limiting their further efficiency advancements and wider commercialization lie in metal contact recombination and the passivation properties of the functional layers. Despite heterojunction cells demonstrating remarkable efficiency, challenges persist in terms of cost reduction and stability enhancement. This study introduces a novel hybrid solar cell architecture that integrates a diffusion‐free front surface field with a high‐quality heterojunction passivation contact. Through rigorous simulation analysis, it is revealed that the hybrid design surpasses conventional PERC in several key aspects: diminished front‐surface recombination losses, enhanced rear‐contact characteristics, and reduced grid shading. By strategically optimizing the front passivation and adopting single‐side wet etching techniques, a PCE of 24.17% and VOC of 716 mV is successfully achieved on a full‐size commercial czochralski silicon wafer (274.15 cm2). Additionally, both experimental EQE tests and simulations delve into the composition of JSC gain during the optimization process. This comprehensive investigation not only offers an in‐depth assessment of hybrid solar cell performance, but also outlines promising avenues for future optimization aimed at pushing theoretical efficiency limits further and enhancing suitability for large‐scale production.
15 August 2025 in Solar Energy Materials and Solar Cells
Molybdenum oxide (MoOX) has been widely utilized as a hole transport layer (HTL) in crystalline silicon (c-Si) solar cells, owing to characteristics such as a wide bandgap and high work function. However, the relatively low conductivity of MoOX films and their poor contact performance at the MoOX-based hole-selective contact severely degrade device performance, particularly because they limit the fill factor (FF). Oxygen vacancies are of paramount importance in governing the conductivity of MoOX films. In this work, MoOX films were modified through ultraviolet irradiation (UV-MoOX), resulting in MoOX films with tunable oxygen vacancies. Compared to untreated MoOX films, UV-MoOX films contain a higher density of oxygen vacancies, leading to an enhancement in conductivity (2.124 × 10−3 S/m). In addition, the UV-MoOX rear contact exhibits excellent contact performance, with a contact resistance of 20.61 mΩ·cm2, which is significantly lower than that of the untreated device. Consequently, the application of UV-MoOX enables outstanding hole selectivity. The power conversion efficiency (PCE) of the solar cell with an n-Si/i-a-Si:H/UV-MoOX/Ag rear contact reaches 24.15%, with an excellent FF of 84.82%.