The present study evaluated the spatial variations of surface water quality in a tropical river using multivariate statistical techniques, including cluster analysis (CA) and principal component analysis (PCA). Twenty physicochemical parameters were measured at 30 stations along the Batang Baram and its tributaries. The water quality of the Batang Baram was categorized as “slightly polluted” where the chemical oxygen demand and total suspended solids were the most deteriorated parameters. The CA grouped the 30 stations into four clusters which shared similar characteristics within the same cluster, representing the upstream, middle, and downstream regions of the main river and the tributaries from the middle to downstream regions of the river. The PCA has determined a reduced number of six principal components that explained 83.6% of the data set variance. The first PC indicated that the total suspended solids, turbidity, and hydrogen sulphide were the dominant polluting factors which is attributed to the logging activities, followed by the five-day biochemical oxygen demand, total phosphorus, organic nitrogen, and nitrate-nitrogen in the second PC which are related to the discharges from domestic wastewater. The components also imply that logging activities are the major anthropogenic activities responsible for water quality variations in the Batang Baram when compared to the domestic wastewater discharge.
1 January 2014 in Journal of Analytical Methods in Chemistry
Fourier Transform Infrared (FTIR) and Gas Chromatography Mass Spectrometry (GCMS) are two common instruments used for analysis of edible oils. The output signal is often analysed on the software attached to the workstations. The processing software is usually individualised for a specific source. The output of GCMS cannot be analysed on the FTIR hence analysts often need to juggle between instruments when multiple techniques are employed. This could become exhaustive when a large dataset is involved. This paper reports a synchronised approach for analysis of signal from FTIR and GCMS. The algorithm is demonstrated on a dataset of edible oils to investigate the thermal degradation of seven types of edible oils treated at 100°C and 150°C. The synchronised routines identify peaks present in FTIR and GCMS spectra/chromatograms where the information is subsequently extracted onto peak tables for further analysis. In this study, it is found that palm based products and corn oils were relatively more stable with higher content of antioxidants tocopherols and squalene. As a conclusion, this approach allows simultaneous analysis of signal from multiple sources and samples enhancing the efficiency of the signal processing process.
1 January 2007 in Journal of the Brazilian Chemical Society
Nitric acid is an effective material for production of humic acids. Nevertheless, it is an expensive item that renders the process unfavorable industrially. Study indicated that there was a possibility to reuse the nitric acid for oxidation however the resulting structures of humic acids was not studied. Therefore, the objective of this study was to investigate the chemical and spectroscopic properties of nitrohumic acids prepared with reused nitric acid. The coal sample was oxidized with 5%, 10% and 15% of nitric acid and subjected to extraction for nitrohumic acids. Concentration of nitric acid with the most yields was reemployed for another 2 cycles of oxidation. The chemical and spectroscopic properties of nitrohumic acids were evaluated. The results indicated that oxidation process generally improved the acidic functional properties of the nitrohumic acids with 10% nitric acid producing the most promising yield. The nitric acid was reused for extraction and the percentage yield remained good at an average of 78%. Structurally, the nitrohumic acids produced with the reused nitric acid demonstrated larger molecular size and fewer acidic functional groups suggesting lesser extent of structure fractionation.