The study focuses on the noise generation due to wear in worm gear systems used in Electric Power Steering (EPS) mechanisms. EPS systems, widely adopted for their precision and environmental benefits, often employ worm gear transmissions that are susceptible to wear under fatigue loads. This wear contributes to undesirable noises which affect vehicle comfort and safety. The research investigates noise related to worm gear wear through kinematic analysis and bench testing, simulating real vehicle conditions. The methods consider acquiring kinematic behavior of EPS at the vehicle level to introduce test conditions for the explained scenario into the bench level. While the durability test is being performed, at certain steps, noise test bench simulation utilizing is beneficial due to its possible correlation with the vehicle level, therefore such testing is significantly more efficient (faster, avoids main issue over the design phase period – vehicle availability). The study finds that worm gear noise increases non-linearly with wear, with significant noise escalation occurring at 80% to 90% of the vehicle's defined life. The findings highlight the need for robust NVH (Noise, Vibration, Harshness) performance assessments during the EPS design process, emphasizing customer satisfaction and product reliability. This work underscores the importance of experimental evaluation which support and lead to mitigating noise issues in EPS systems.
This study proposes a practical and systematic methodology for identifying and characterizing magnetically induced noise in Column Electric Power Steering (CEPS) systems through vehicle-level testing. A coil sensor mounted on the Electric Power Steering (EPS) motor was employed to capture induced voltage signals during steering maneuvers, providing a real-time tachometric reference for order-tracking analysis. In-vehicle acoustic measurements conducted with a binaural headset revealed dominant magnetic harmonics—most notably the 24th order associated with rotor–stator interaction—and their higher-order components. To validate these observations under controlled conditions, complementary experiments were performed in a semi-anechoic chamber. Additionally, structural dynamic properties were evaluated through impact testing to distinguish electromagnetic excitations from mechanical resonances. The proposed methodology demonstrates a cost-effective and accurate approach for assessing the Noise, Vibration, and Harshness (NVH) characteristics of EPS systems, facilitating design optimization and noise mitigation without the need for extensive instrumentation or full-vehicle prototype testing.