The complex environment of metal mines causes significant noise interference in microseismic signals. This leads to low accuracy and high false alarm rates when using the conventional Short-Term Average/Long-Term Average (STA/LTA) method for first-arrival picking. To address these issues, this paper proposes an improved approach that combines Variational Mode Decomposition (VMD) with STA/LTA(V-STA/LTA). The proposed method selects effective mode components through multimodal decomposition. Subsequently, an energy-weighted fusion is achieved based on energy distribution characteristics to improve the accuracy of arrival time-picking. First, the microseismic signal is decomposed by VMD. The center frequencies of the Intrinsic Mode Functions (IMFs) are then calculated through Fast Fourier Transform (FFT). This helps identify and retain the effective mode components, reducing noise interference. Next, the STA/LTA method is applied to each selected mode component for first-arrival picking. Finally, the results from the different components are fused based on their energy weights for improving picking precision. In low signal-to-noise ratio (SNR) conditions, the effectiveness of the V-STA/LTA method was verified through simulation experiments and field data tests. In theoretical simulations, according to test results from multiple sets of different signal-to-noise ratios, the root mean square error (RMSE) (0.0005) and mean absolute error (MAE) (0.00055) of V-STA/LTA are significantly lower than those of STA/LTA and AIC. In actual data, the average accuracy (99.77%) is nearly 1 percentage point higher than that of the traditional STA/LTA (98.93%), improving the accuracy of microseismic signal arrival time-picking.
The complex environment in metal mines introduces substantial noise into microseismic signals, which reduces the accuracy of arrival time picking and affects source localization. When the Cumulative Sum (CUSUM) method is directly applied, it often leads to inaccurate arrival time picking with low precision and high false alarm rates. To address these limitations, this paper proposes a novel arrival time picking method (V-CUSUM) that combines Variational Mode Decomposition (VMD) with the CUSUM algorithm. The microseismic signal is first decomposed into band-limited intrinsic mode functions (IMFs) using VMD with fractal box dimension-optimized parameters (K = 5; α = 2000). Effective IMFs are selected based on the Pearson correlation coefficient (threshold: |r| > 0.5), and the CUSUM method is independently applied to each selected component for arrival time detection. The final arrival time is determined by averaging the individual picking results. Simulation experiments demonstrate that the proposed method achieves a root mean square error (RMSE) of 0.0024 s and a mean absolute error (MAE) of 0.0018 s, substantially outperforming the Short-Term Average/Long-Term Average Method (STA/LTA) (RMSE = 0.0347 s) and Akaike information criterion, AIC (RMSE = 0.061 s), methods. Validation with field microseismic data from a metal mine shows that V-CUSUM achieves an average picking accuracy of 99.86% with a standard deviation of 0.007 s, compared with 97.85% for STA/LTA and 99.58% for AIC. These results confirm that the V-CUSUM method provides a robust, accurate, and physically interpretable framework for microseismic arrival time picking under complex noise conditions.