The pool-type demonstrative China Fast Reactor 600 (CFR-600) adopted a series of improved safety designs, among which the hydraulic suspended passive shutdown subassembly (HS-PSS) is employed for inherent safety enhancement, especially suitable against unprotected loss of flow accident (ULOF). In this article, functional requirements for HS-PSS design in hydro-dynamic aspects are proposed, with the corresponding performance indicators discussed. To address these functional requirements, qualitative analysis on the equilibrium solution properties of the nonlinear dynamical model equation of the hydraulic moving body (HMB) in the HS-PSS are conducted, which leads to the determination of an applicable design parameter domain of the HMB for its practical design from the broad range of structural and parametric design options available for HS-PSS. Furtherly, hydraulically characterizing and modeling the constituent paths and consequent fluid network, hydraulic characteristics of the HS-PSS, as well as the coupled hydro-dynamic motion behaviors of the HMB for suspension and dropping states, were simulated and test-validated. Considering the HS-PSS hydro-dynamic behaviors, key indicators such as critical flowrate, drop time, hydraulic self-tightening performance, as well as the hydraulic characteristics curve are for fulfilling the functional requirements. Meanwhile, through sensitivity study of some structural parameters‘ impact on hydraulic characteristics, some most sensible structural parameters for adjusting and optimizing detailed design are observed. The work is quite significant in supporting the conceptual design of the HS-PSS as well as its engineering improvement.
Transient safety analysis is a critical aspect of ensuring the safe design of Liquid Metal-cooled Fast Reactors (LMRs), relying heavily on advanced system analysis programs. To this end, the China Institute of Atomic Energy (CIAE) independently developed the Fast Reactor Transient Analysis Code (FRTAC) system analysis code for LMRs, which has been applied to the safety analysis of several reactor types. However, long-term use has revealed certain limitations, such as complex control system modeling and numerical dissipation from the first-order numerical scheme. This study analyzes the current limitations of the code and carries out systematic improvements and validation. The main improvements include enhancing the system compilation architecture and refactoring functional modules to improve computational efficiency, scalability, and usability; introducing a second-order accurate numerical scheme based on a limiter to reduce numerical dissipation in the convection term while ensuring computational stability; and optimizing the solution procedure to accommodate the new architecture and algorithms. The improved code’s computational stability and accuracy were validated using the Edwards blowdown experiment and the Energy Technology Engineering Center (ETEC) once-through steam generator steady-state test, respectively. The validation results show that the improved code maintains excellent numerical stability in problems with rapid transient pressure changes. In steady-state convective heat transfer problems, the computational accuracy and grid convergence are significantly improved, with the relative deviation of the water-side outlet temperature reduced from −3.56% to −0.59%. Under the same computational conditions, the computational efficiency was increased by up to 36.1%. The results of this study will provide a more accurate and efficient system analysis code for the transient safety analysis of LMRs.