Given that methane (CH4) and nitrogen (N2) have similar properties, achieving high-purity enrichment of CH4 from nitrogen-rich low-grade gas is extremely challenging and is of great significance for sustainable development in energy and the environment. This paper reviews the research progress on carbon-based materials, zeolites, and MOFs as adsorbent materials for CH4/N2 separation. It focuses on the relationship between the composition, pore size, surface chemistry of the adsorbents, CH4/N2 selectivity, and CH4 adsorption capacity. The paper also highlights that controlling pore size and atomic-scale composition and optimizing these features for the best match are key directions for the development of new adsorbents. Additionally, it points out that MOFs, which combine the advantages of carbon-based adsorbents and zeolites, are likely to become the most promising adsorbent materials for efficient CH4/N2 separation.
27 July 2022 in Spectrochimica Acta Part A: Molecular and Biomolecular Spectroscopy
The conjugated structure of carbon is used in chemical sensing and small molecule catalysis because of its high charge transfer ability, and the interaction between carbon materials and small molecules is the main factor determining the performance of sensing and catalytic reactions. In this work, Reduced Density Gradient (RDG) and Symmetry-Adapted Perturbation Theory (SAPT) energy decomposition methods were used in combination to investigate the heterogeneity of catalytic substrates commonly used in energy chemistry with [6, 6] the carbon nanobelt ([6, 6] CNB, the interaction properties and mechanisms inside and outside the system). The results show that most of the attractive forces between dimers are provided by dispersive interactions, but electrostatic interactions cannot be ignored either. The total energy of the internal adsorption of [6, 6] CNB was significantly smaller than that of external adsorption, which led to the small molecules being more inclined to adsorb in the inner region of [6, 6] CNB. The dispersive interactions of small molecules adsorbed on [6, 6] CNB were also found to be very high. Furthermore, the dispersive interactions of the same small molecules adsorbed inside [6, 6] CNB were significantly stronger than those adsorbed outside. In [6, 6] CNB dimers, dispersion played a major role in the mutual attraction of molecules, accounting for 70% of the total attraction.
This study investigates the Chang 4 + 5 ultra-low permeability reservoirs in the Jiyuan area of the Ordos Basin using integrated thin-section analysis, SEM, XRD, nitrogen adsorption, high-pressure mercury intrusion, NMR, and micro-CT techniques. By calibrating NMR with adsorption–intrusion data, a continuous multi-scale pore size distribution was established. The reservoirs are characterized by diverse pore types and pore-throat assemblages, with pore systems dominated by nanopores exhibiting a bimodal distribution. Sedimentary processes exert a primary control on grain size and sandbody architecture, resulting in pronounced reservoir heterogeneity, among which distributary-channel sandstones generally show more favorable reservoir properties. Diagenetic processes further modify the pore system: compaction and cementation reduce storage and flow capacity, whereas dissolution enhances effective pore development. Seepage behavior is strongly controlled by pore structure and can be summarized as “pores dominate storage, pore throats dominate flow.” Pore-throat size and sorting regulate bound-water occurrence and oil-phase flow capacity, while water-phase relative permeability curves exhibit two representative patterns. These results provide microscopic support for sweet-spot evaluation and efficient development of ultra-low permeability reservoirs.
Under the “dual carbon” goals, offshore oil and gas development requires efficient CO2 reduction solutions. This study investigates a membrane–cryogenic distillation-coupled process for treating high-CO2-associated gas (40%–70% CO2). The experimental results demonstrate that the membrane unit enriches CO2 to over 80% under optimized pressure and temperature conditions. Subsequent cryogenic distillation further purifies CO2 to ≥95% with a recovery rate of 80%. The integrated system improves the overall recovery to 80%, reduces energy consumption, and decreases the equipment footprint by approximately 30% compared to conventional methods. This process demonstrates technical feasibility, along with economic and environmental benefits, for decarbonizing offshore gas production, supporting green development in the energy sector.
The Dalazi Formation in the Yanji Basin is primarily composed of fan delta and lacustrine facies, with local development of alluvial fan deposits. The second member of the Dalazi Formation (Da₂) serves as the key oil-bearing interval for exploration and development. Based on logging data, lithological observations, and maximum entropy spectral analysis (MESA), Da₂ is interpreted to mainly represent a continental fan delta system. Due to the complex depositional environment, significant variations exist in sedimentary types, resulting in notable differences in both lithology and logging curves, which hinders regional correlation using conventional logging marker bed pairings. In order to solve this problem, based on the theory of high resolution sequence stratigraphy and astronomical cycle theory, this paper uses the maximum entropy spectrum analysis, spectrum analysis and wavelet time–frequency analysis technology to process and analyze the natural gamma curve (GR) data, and combines the logging lithology information to identify the sequence interface. According to the prediction error trend (INPEFA) curve in MESA, it is identified that Da2 contains 1 long-term base level rise half-cycle and 1 long-term base level fall half-cycle. On this basis, the mid-term base level cycle and short-term base level cycle are identified by combining spectrum analysis technology and wavelet time–frequency technology. Finally, The Da2 sequence is subdivided into 1 long-term, 6 mid-term, and 16 short-term base level cycles, based on which a sequence stratigraphic division scheme is proposed. Based on this, a high-resolution stratigraphic framework is established, which provides accurate geological basis for subsequent comprehensive reservoir evaluation and sand body prediction.