It is a challenging task for an aerial manipulator to complete dual-arm cooperative manipulation in an outdoor environment. In this study, a new dual-arm aerial manipulator system with flexible operation is developed. The dual-arm manipulator system is designed for the application of aerial manipulation, and it has the characteristics of low weight, low inertia, and a humanoid arm structure. The arm structure is composed of customized aluminum parts, each manipulator contains four degrees of freedom, similar to the arrangement of human joints, including shoulder yaw, shoulder pitch, elbow pitch, and wrist roll. Next, the workspace of the dual-arm manipulator is simulated and analyzed, and the relevant kinematic and dynamic models are deduced. Finally, through the lift load, accuracy and repeatability, cooperative bimanual manipulation tests on the test bench, and multiple groups of outdoor flight tests, the relevant performance analysis and verification of the dual-arm aerial manipulator system are carried out. The test results evaluate the feasibility of the designed dual-arm aerial manipulator system for outdoor cooperative manipulation.
Insulators on power lines require regular maintenance by operators in high-altitude hazardous environments, and the emergence of aerial manipulators provides an efficient and safe support for this scenario. In this study, a lightweight telescopic aerial manipulator system is developed, which can realize the installation and retrieval of insulator inspection robots on power lines. The aerial manipulator has three degrees of freedom, including two telescopic scissor mechanisms and one pitch rotation mechanism. Multiple types of cameras and sensors are specifically configured in the structure, and the total mass of the structure is 2.2 kg. Next, the kinematic model, dynamic model, and instantaneous contact force model of the designed aerial manipulator are derived. Then, the hybrid position/force control strategy of the aerial manipulator and the visual detection and estimation algorithm are designed to complete the operation or complete the task. Finally, the lifting external load test, grasp and installation operation test, as well as outdoor flight operation test are carried out. The test results not only quantitatively evaluate the effectiveness of the structural design and control design of the system but also verify that the aerial manipulator can complete the accurate automatic grasp and installation operation of the 3.6 kg target device in outdoor flight.
Achieving more natural and user-friendly interaction with the novel humanoid dual-arm aerial manipulator to realize hybrid intelligent teleoperation control remains an urgent problem. This paper proposes a vision-based intuitive control strategy for our designed novel aerial bimanual manipulator, focusing on enhancing human-robot interaction (HRI) and vision-based teleoperation. This innovative HRI control strategy approximates complicated nonlinear mapping functions between the human operator's motion intent and the manipulator's positioning. Moreover, robust full-body 3D skeleton tracking from multiple Kinect DK units is fused using the KF algorithm to serve the aerial manipulator's teleoperation control. Employing this control system, the anthropomorphic aerial manipulator can cooperate with a human to execute bimanual tasks flexibly and efficiently. Experiments show the adequacy and accuracy of the proposed vision-based skeleton tracking method for aerial manipulator teleoperation control in facilitating collaborative human-robot interaction.