This paper presents a high-performance 4-array InGaAs UTC-PD fabricated on a silicon carbide (SiC) substrate, designed to improve thermal management and enhance output power for terahertz (THz) wave applications. The developed 4-array UTC-PD configuration enables precise beam steering at 300 GHz, demonstrating multi-directional wireless communication utilizing On-Off Keying (OOK) modulation. The SiC substrate with thermal conductivity approximately seven times higher than that of conventional indium phosphide (InP) substrates suppresses device overheating, preventing thermal damage and performance degradation even under high photocurrent conditions, while significantly enhancing THz output power. Furthermore, we successfully demonstrated the real-time transmission of uncompressed 4K video, underscoring the feasibility of this system for high-capacity THz wireless communication applications. Finally, Beam-Switching Time Division Multiplexing (BS-TDM) was also implemented and evaluated, demonstrating its potential for efficient resource allocation in next-generation wireless systems.
The terahertz (THz) band holds transformative potential for next-generation communication and sensing systems, yet practical deployment remains hindered by limited output power from available electronic and photonic THz sources. In this work, we demonstrate an on-chip optoelectronic THz wave power enhancement approach by monolithically integrating a microstrip patch antenna and a 4 × 1 T-junction combiner with arrayed InGaAs/InP uni-traveling carrier photodiodes (UTC-PDs) on a silicon carbide (SiC) substrate. Relative to a single UTC-PD device, experimental results show a 10.9 dB increase in detected power at 300 GHz when combining photocurrents from four UTC-PDs biased at –1 V, closely aligning with theoretical predictions of scaling characteristics of current-driven sources. This work also establishes that SiC has the potential to be a robust platform for high-power THz systems.
1 April 2024 in Japanese Journal of Applied Physics
We designed a novel terahertz wave power combiner which combines HF currents from each photomixer in a micro strip line. The generator is composed of four uni-travelling carrier photodiodes (UTC-PDs) as the photomixers, a 4 × 1 Wilkinson power combiner and a microstrip rectangular patch antenna on a Silicon Carbide (SiC) substrate in which photocurrents of 300 GHz from the UTC-PDs are combined to be fed to the antenna. Experimental results show that the output power is multiplied by 11 dB (approximately 13 times) compared to that of a single UTC-PD. The combined power increases super-linearly with the number of the photomixers, confirms a great advantage of photomixing as a current source.
Advanced two-dimensional (2D) beam steering is critical for unlocking the full potential of terahertz (THz) systems in future 6G communications and high-resolution imaging. However, realizing wide-angle, high-speed, and high-precision 2D beam control in a compact and simple THz front end remains challenging. This paper experimentally demonstrates a photonics-assisted 2×2 THz antenna array that enables flexible 2D beam steering, 2D beam hopping, and fast 2D beam scanning around the 300-GHz band. The proposed front end is an integrated THz photomixer composed of a 2×2 microstrip patch antenna (MPA) array directly fed by InGaAs/InP uni-traveling-carrier photodiodes (UTC-PDs) on a silicon carbide (SiC) substrate. The relative phases of the four radiating elements are precisely controlled by an optical phased array (OPA), providing a fully decoupled and low-latency phase control mechanism. Experimentally, we realize 2D beam steering and 2D beam hopping among three representative beam directions at an elevation angle of 25° with azimuth angles of 60°, 180°, and 300°. Furthermore, continuous 2D beam scanning is demonstrated at a fixed elevation of 25°, achieving a full 360° azimuth sweep within 0.43 s while maintaining high beam quality. These results confirm that the proposed 2×2 photomixer-based array offers a practical and robust solution for agile 2D THz beam manipulation, and holds strong promise for future 6G wireless links and THz image sensing applications.
Advanced two-dimensional (2D) beam steering is essential for unlocking the full potential of terahertz (THz) systems in future 6G communications and high-resolution imaging. However, achieving wide-angle, high-speed, and high-precision 2D beam control within a compact THz platform remains a significant challenge. In this work, we experimentally demonstrate an optoelectronic THz antenna array that enables flexible 2D beam steering, beam hopping, and beam scanning around the 300 GHz band. This work employs a microstrip patch antenna (MPA) array directly driven by InGaAs/InP UTC-PDs on a silicon carbide (SiC) substrate. The relative phases of the four radiating elements are precisely programmed using an optical phased array (OPA), which provides fully decoupled and low-latency phase control in the optical domain. Experimentally, we demonstrate 2D beam steering and 2D beam hopping among three representative directions at a polar angle of and azimuth angles of , , and . Furthermore, continuous 2D beam scanning at a fixed polar angle of is achieved, enabling a full azimuth sweep within 0.43 s while maintaining high beam quality. These results confirm that the proposed UTC-PD based MPA array provides a practical and robust approach for 2D THz beam manipulation, and offers strong potential for future 6G wireless links and THz imaging applications.