Previous studies have indicated that a basic frost layer negatively affects the heat-transfer efficiency and is difficult to remove using a single ultrasonic transducer. Herein, an ultrasonic phased array technology is proposed for evaporator coil defrosting. First, the dispersion curve of the guided wave in the vibration transfer plate and frosting fin is calculated, and the advance time of each ultrasonic vibrator and the ultrasonic near-field pressures under different velocities are determined through numerical calculations using the MATLAB software. Next, according to the advance time, ultrasonic array focusing is performed to remove the basic frost layer. Finally, the power consumption, heat-supply enthalpy difference, and coefficient of performance (COP) of the air-source heat pump (ASHP) unit are analysed. The theoretical analysis, numerical calculations, and experimental results consistently revealed that ultrasonic array focusing compensates for the energy dissipation and expends the effective defrosting area. Additionally, the perpendicular stress elicited by the Lamb wave and the differential transverse shear stress generated by the SH wave exceed the tensile strength and adhesion stress of the basic frost layer. The basic frost layer cracks and falls away, owing to the combination of the ultrasonic stress effect and the cavitation effect. The defrosting power consumption of the ASHP unit under ultrasonic array excitation decreases from −3.27% to 0.12%, whereas the heat-supply enthalpy difference increases from 4.47% to 10.86%. Therefore, the percentage increment of the COP is between 7.16% and 11.12%, and the power consumption of the reverse-cycle defrosting is 3–12 times that of ultrasonic array defrosting.
20 August 2024 in Science and Technology for Energy Transition
The electrical equipment of intelligent substation cannot deal with the problem of load mutation, and the load adjustment is not timely, which leads to the poor performance of thermal fault identification of electrical equipment. Therefore, a study on thermal fault identification of the electrical equipment of intelligent substation based on infrared technology is proposed. First, under the background of infrared technology, according to the thermal fault feature extraction model of substation electrical equipment, the principle of double station cross location is proposed; combined with the sampling results of thermal fault characteristic parameters of electrical equipment in intelligent substation, the thermal fault characteristics are analyzed; through the process of thermal fault identification of electrical equipment in intelligent substation, the preliminary classification structure of thermal fault is obtained and the thermal fault identification is completed. The experimental results show that the designed method has good performance of thermal fault identification, high output stability, better identification effect after optimization, and highly sensitive identification ability.
5 November 2024 in Science and Technology for Energy Transition
Following the publication of the Retraction Notice, the article was formally retracted on 29 January 2025. The Publisher and Editors in Chief received an allegation of plagiarism for this article published recently in STET. The investigation into this allegation has confirmed a very high rate of similarity with an article currently under peer review in the journal Electrical Engineering consistent with the alleged plagiarism, and the anteriority of the submission in Electrical Engineering. Every submitted manuscript to STET is compared to published papers in order to detect similarities. However, in the present case the paper in question was still under evaluation. The authors of the article published in STET have not provided convincing answers concerning their contribution to the work and have not provided an explanation for the excessive similarity. The Publisher and Editors have concluded to the truth of the allegation and have decided to retract this article.
Bowhead whales (Balaena mysticetus) are an important species in the Arctic ecosystem, but their conservation is challenged by environmental noise from shipping and climate change. Effective monitoring of Bowhead whale vocalizations is essential for their conservation, yet traditional acoustic methods face limitations in detecting weak and non-stationary signals amidst complex background noise. In this study, we propose a novel method, Local Maximum Simultaneous Extraction of Generalized S-Transforms (LMSEGST), to enhance the feature extraction of Bowhead whale calls. The LMSEGST method integrates generalized S-transforms with local maximum extraction, improving time-frequency resolution and noise immunity. We compare the performance of LMSEGST with traditional methods (STFT, GST, and LMSST) using synthetic and real-world datasets. The results show that LMSEGST outperforms the other methods, with a 28.32% reduction in Rayleigh entropy compared to STFT at 5 dB SNR and a 28.24% reduction compared to LMSST at 10 dB SNR. Additionally, LMSEGST maintained higher SNR values, demonstrating superior noise resistance. These findings suggest that LMSEGST offers a more robust solution for acoustic monitoring of Bowhead whales, particularly in noisy, Arctic environments, contributing to more effective conservation strategies for this species.
At present, most of the work of using images to identify Sousa Chinensis still relies on manual labor, which is time-consuming and difficult to process a large number of pictures taken during the survey in time. This paper proposes an image recognition method of Sousa Chinensis based on deep learning to improve Sousa Chinensis' recognition efficiency and accuracy significantly. Using technologies such as the improved YOLO V5 neural network model and the Kmeans clustering algorithm, Sousa Chinensis ' images can be quickly and accurately recognized. The dorsal fin area can be automatically selected to add keyword labels. After the successful identification of the dorsal fin profile of the Sousa Chinensis, this study also accurately distinguished the Sousa Chinensis among individuals by constructing a convolutional neural network, ResNet101 network model, and Faster-RCNN target detection algorithm according to the occurrence time, gray level of body color, dorsal fin shape, and spots and other parameters of the Sousa Chinensis. Experimental results show that this study can effectively identify the dorsal fin of Sousa Chinensis and improve the work efficiency of Marine biologists.