The ultra-fast gain dynamics in quantum-dot semiconductor optical amplifiers (QD-SOAs) have been studied for different types of Auger-assisted relaxation processes. The ultra-fast gain recovery time and gain compression are studied for p-type doped and un-doped QD-SOAs using rate equation model. Our calculations show that the ultra-fast gain dynamics is governed by electron-electron Auger-assisted process for un-doped QD-SOA and by electron-hole Auger-assisted process for p-type doped (NA=1.25times1018 cm-3) QD-SOA. We find that the ultra-fast gain recovery time for un-doped QD-SOA is comparable with that of p-type doped QD-SOA when both electron hole and electron-electron processes present in the active region. We find that the percentage of ultra-fast gain compression in un-doped QD-SOA is limited to ~ 72%. While for p-type doped (NA=1.25times1018 cm-3) QD-SOA, we find that the percentage of ultra-fast gain compression increases as the applied current increases where it can reach >95% at very high applied current.
Novel closed-form model for multiple-state quantum-dot semiconductor optical amplifiers (QD-SOAs) is derived. The model takes into account the effect of the ground state, excited state and the wetting layer. The model is simple, accurate and exhibits negligible computational time compared with numerical simulation. In addition, the derived model is valid for arbitrary applied current and input photon density and is interesting for device design and optimization. Analytical expressions for the optical gain, effective saturation density, maximum output density and the transparency current are also derived. Our model revealed that the effective saturation density of QD-SOAs strongly depends on the photon density and the applied current.
We have measured the characteristics of SiGe-Si quantum-well (QW) waveguide electroabsorption modulators grown by molecular beam epitaxy (MBE). The modulation is based on the decoupling of the electron wavefunction from the shallow wells for electrons with a small band-bending. A 100-μm-long modulator demonstrates contrast ratio and insertion loss of 1.43 and 28.5 dB, respectively.