With the rapid development of wearable electronic devices, multifunctional ultrarobust, thermoconductive, nonflammable, and electromagnetic interference (EMI) shielding films which are widely utilized to efficiently dissipate heat generated from electronic components are in high demand. The poor scalability and mechanical flexibility of multifunctional papers usually hinder their practical application. In this study, mass-scalable ultrarobust graphene nanoplatelet (GnP) cross-linked aramid nanofiber (ANF) papers with a nacre-bioinspired structure are fabricated via an evaporation-induced self-assembly approach. By chemical cross-linking between two-dimensional GnPs and one-dimensional ANFs in the nacre-bioinspired structure by a phosphorus agent, the excellent toughness and folding endurance of the GnP based ANF papers have been successfully achieved with simultaneous integration of high-level multifunctional properties. Specifically, the ultrarobust GnP based ANF paper with 50 wt% GnP loading exhibits exceptional ultimate tensile strength (437 MPa), Young's modulus (19.7 GPa) and toughness (23.9 MJ m⁻³) as well as superb folding endurance after 10 000 bending cycles. Moreover, the highly ordered alignment of GnP induced an unprecedented thermal/electrical conductivity, and the GnP (50 wt%) based ANF papers with an ultrathin thickness of 21 μm show a superb in-plane thermal conductivity (up to 68.2 W m⁻¹ K⁻¹) and outstanding absolute effectiveness EMI shielding (up to 11 060 dB cm² g⁻¹) and are comparable with some commercial metals/alloys. These outstanding mechanical flexibility integrated superb thermal/EMI properties along with mass-scale production pave the way for practical applications of GnP based ANF papers in the development of advanced thermal management materials in autonomous cars, air vehicles and wearable devices.

This paper describes a rollover index for detection or prediction of impending rollover in different driving situations using minimum sensor signals which can be easily obtained from an electronic stability control (ESC) system. The estimated lateral load transfer ratio (LTR) was used as a rollover index with only limited information such as the roll state of the vehicle and some constant parameters. A commercial vehicle has parameter uncertainties because of its load variation. This is likely to affect the driving performance and the estimation of the dynamic state of the vehicle. The main purpose of this paper is to determine the rollover index based on reliable measurements and the parameters of the vehicle. For this purpose, a simplified lateral and vertical vehicle dynamic model was used with some assumptions. The index is appropriate for various situations although the vehicle parameters may change. As part of the index, the road bank angle was investigated in this study, using limited information. Since the vehicle roll dynamics are affected by the road bank angle, the road bank angle should be incorporated, although previous studies ignore this factor in order to simplify the problem. Because it increases or reduces the chances of rollover, consideration of the road bank angle is indispensable in the rollover detection and mitigation function of the ESC system. The performance of the proposed algorithm was investigated via computer simulation studies. The simulation studies showed that the proposed estimation method of the LTR and road bank angle with limited sensor information followed the actual LTR value, reducing the parameter uncertainties. The simulation model was constructed based on a heavy bus (12 tons).

This paper presents a method to design active suspension controllers for a 7-Degree-of-Freedom (DOF) full-car (FC) model from controllers designed with a 2-DOF quarter-car (QC) one. A linear quadratic regulator (LQR) with 7-DOF FC model has been widely used for active suspension control. However, it is too hard to implement the LQR in real vehicles because it requires so many state variables to be precisely measured and has so many elements to be implemented in the gain matrix of the LQR. To cope with the problem, a 2-DOF QC model describing vertical motions of sprung and unsprung masses is adopted for controller design. LQR designed with the QC model has a simpler structure and much smaller number of gain elements than that designed with the FC one. In this paper, several controllers for the FC model are derived from LQR designed with the QC model. These controllers can give equivalent or better performance than that designed with the FC model in terms of ride comfort. In order to use available sensor signals instead of using full-state feedback for active suspension control, LQ static output feedback (SOF) and linear quadratic Gaussian (LQG) controllers are designed with the QC model. From these controllers, observer-based controllers for the FC model are also derived. To verify the performance of the controllers for the FC model derived from LQR and LQ SOF ones designed with the QC model, frequency domain analysis is undertaken. From the analysis, it is confirmed that the controllers for the FC model derived from LQ and LQ SOF ones designed with the QC model can give equivalent performance to those designed with the FC one in terms of ride comfort.

This paper presents high definition (HD) map-based localization using advanced driver assistance system (ADAS) environment sensors for application to automated driving vehicles. A variety of autonomous driving technologies are being developed using expensive and high-performance sensors, but limitations exist due to several practical issues. In respect of the application of autonomous driving cars in the near future, it is necessary to ensure autonomous driving performance by effectively utilizing sensors that are already installed for ADAS purposes. Additionally, the most common localization algorithm, which is usually used lane information only, has a highly unstable disadvantage in the absence of that information. Therefore, it is essential to ensure localization performance with other road features such as guardrails when there are no lane markings. In this study, we would like to propose a localization algorithm that could be implemented in the near future by using low-cost sensors and HD maps. The proposed localization algorithm consists of several sections: environment feature representation with low-cost sensors, digital map analysis and application, position correction based on map-matching, designated validation gates, and extended Kalman filter (EKF)-based localization filtering and fusion. Lane information is detected by monocular vision in front of the vehicle. A guardrail is perceived by radar by distinguishing low-speed object measurements and by accumulating several steps to extract wall features. These lane and guardrail information are able to correct the host vehicle position by using the iterative closest point (ICP) algorithm. The rigid transformation between the digital high definition map (HD map) and environment features is calculated through ICP matching. Each corrected vehicle position by map-matching is selected and merged based on EKF with double updating. The proposed algorithm was verified through simulation based on actual driving log data.

Research shows that urban intersections are a hotspot for traffic accidents which cause major human injuries. Predicting turning, passing, and stop maneuvers against surrounding vehicles is considered to be fundamental for advanced driver assistance systems (ADAS), or automated driving systems in urban intersections. In order to estimate the target intent in such situations, an interacting multiple model (IMM)-based intersection-target-intent estimation algorithm is proposed. A driver model is developed to represent the driver’s maneuvering on the intersection using an IMM-based target intent classification algorithm. The performance of the intersection-target-intent estimation algorithm is examined through simulation studies. It is demonstrated that the intention of a target vehicle is successfully predicted based on observations at an individual intersection by proposed algorithms.

This paper focuses on a method of rearview camera-based blind-spot detection and a lane change assistance system for autonomous vehicles, utilizing a convolutional neural network and lane detection. In this study, we propose a method for providing real-time warnings to autonomous vehicles and drivers regarding collision risks during lane-changing maneuvers. We propose a method for lane detection to delineate the area for blind-spot detection and for measuring time to collision—both utilized to ascertain the vehicle’s location and compensate for vertical vibrations caused by vehicle movement. The lane detection method uses edge detection on an input image to extract lane markings by employing edge pairs consisting of positive and negative edges. Lanes were extracted through third-polynomial fitting of the extracted lane markings, with each lane marking being tracked using the results from the previous frame detections. Using the vanishing point where the two lanes converge, the camera calibration information is updated to compensate for the vertical vibrations caused by vehicle movement. Additionally, the proposed method utilized YOLOv9 for object detection, leveraging lane information to define the region of interest (ROI) and detect small-sized objects. The object detection achieved a precision of 90.2% and a recall of 82.8%. The detected object information was subsequently used to calculate the collision risk. A collision risk assessment was performed for various objects using a three-level collision warning system that adapts to the relative speed of obstacles. The proposed method demonstrated a performance of 11.64 fps with an execution time of 85.87 ms. It provides real-time warnings to both drivers and autonomous vehicles regarding potential collisions with detected objects.