The rise in the number and intensity of natural disasters is a serious problem that affects the whole world. The consequences of these disasters are significantly worse when they occur in urban districts because of the casualties and extent of the damage to goods and property that is caused. Until now feasible methods of dealing with this have included the use of wireless sensor networks (WSNs) for data collection and machine-learning (ML) techniques for forecasting natural disasters. However, there have recently been some promising new innovations in technology which have supplemented the task of monitoring the environment and carrying out the forecasting. One of these schemes involves adopting IP-based (Internet Protocol) sensor networks, by using emerging patterns for IoT. In light of this, in this study, an attempt has been made to set out and describe the results achieved by SENDI (System for dEtecting and forecasting Natural Disasters based on IoT). SENDI is a fault-tolerant system based on IoT, ML and WSN for the detection and forecasting of natural disasters and the issuing of alerts. The system was modeled by means of ns-3 and data collected by a real-world WSN installed in the town of São Carlos - Brazil, which carries out the data collection from rivers in the region. The fault-tolerance is embedded in the system by anticipating the risk of communication breakdowns and the destruction of the nodes during disasters. It operates by adding intelligence to the nodes to carry out the data distribution and forecasting, even in extreme situations. A case study is also included for flash flood forecasting and this makes use of the ns-3 SENDI model and data collected by WSN.

Indoor positioning systems (IPSs) allow the location and tracking of mobile devices in indoor environments where the global positioning system (GPS) does not provide satisfactory results. In model-based IPSs, it is common to use signal propagation models to estimate distances between anchor nodes and mobile devices using the received signal strength indicator (RSSI). However, using fixed parameters in the path loss model to characterize the signal in large-scale scenarios results in the degradation of the positioning accuracy. In this article, we propose the adaptive model (ADAM) positioning system, a model-based IPS that chooses the best anchor nodes to benefit the positioning computation and uses different parameters for the log-distance model to represent the signal in different regions and conditions of the scenario. Then, we estimate a single, more precise position using a data fusion technique. Our proposal does not require training nor prior knowledge of the best parameters for each region. We evaluated the performance of our proposed system in a real-world, large-scale environment using Bluetooth-based mobile devices. Our results clearly show that ADAM can locate mobile devices with an average error of 2.93 m in relation to the real position, which is 23% better than literature-based models using fixed parameters for the entire environment.

Indoor Positioning Systems (IPSs) have emerged as a research topic in mobile computing, enabling the tracking and location of mobile devices within indoor environments. In model-based IPSs, the Received Signal Strength Indicator (RSSI) is used to estimate the distance between wireless signal receivers and transmitters using signal propagation models. However, the indoor environment presents challenges that make distance estimation using RSSI difficult. In this paper, we propose a new indoor positioning system that combines Particle Swarm Optimization (PSO) with signal propagation models to improve the accuracy of mobile device positioning. The PSO algorithm is used to optimize the position estimation process by generating different particles in the map, while the signal propagation model is used to model the attenuation and reflection of wireless signals in each particle. Our MIPS-PSO system does not require any prior training nor any knowledge of the best parameters of the signal propagation model. We evaluated the performance of our system using data collected in a real indoor environment with Bluetooth-Low-Energy (BLE) devices. Our results show that the MIPS-PSO achieves an average error of 2.57 m, an improvement of 40% when compared to a traditional trilateration, model-based IPS.

In this paper, we propose an intelligent method, named the Novelty Detection Power Meter (NodePM), to detect novelties in electronic equipment monitored by a smart grid. Considering the entropy of each device monitored, which is calculated based on a Markov chain model, the proposed method identifies novelties through a machine learning algorithm. To this end, the NodePM is integrated into a platform for the remote monitoring of energy consumption, which consists of a wireless sensors network (WSN). It thus should be stressed that the experiments were conducted in real environments different from many related works, which are evaluated in simulated environments. In this sense, the results show that the NodePM reduces by 13.7% the power consumption of the equipment we monitored. In addition, the NodePM provides better efficiency to detect novelties when compared to an approach from the literature, surpassing it in different scenarios in all evaluations that were carried out.