We live in a world that is completely dependent on energy; thus, humankind can no longer live without power. With electricity being the main form of energy today, this has increased the complexity of our life today. In Uganda, electricity generation is mainly through hydropower, which puts the country in the bottleneck of overdependence on one source of energy. There are many energy systems out there that the country can use to diversify its electricity generation. Therefore, the need to understand the level of development and utilization of various energy systems has been the underlying question for this present study. A comprehensive literature survey was conducted using electronic databases, including ScienceDirect, Wiley, Sage, Scopus, Taylor & Francis, and Google Scholar. The publications in the form of reports, conference papers, working papers, discussion papers, journal articles, book sections, and textbooks were considered in this study. In total, 11 energy systems, including human and animal energy, solid biomass (firewood), hydropower, wind, geothermal, solar, nuclear, peat, coal, petroleum, and nonsolid biomass (methanol, hydrogen, ethanol, biodiesel, and biogas), are described. The current and future development and utilization of these energy systems have been described. The challenges for developing and utilizing these systems were elaborated on, and the solutions for their challenges were presented. Hydropower from the Nile River, being the main river for large hydropower plant construction, is the dominant energy system in Uganda. Nuclear energy will be the salvation for the country’s electric energy supply in the near future. Therefore, Uganda needs to bet big on nuclear energy.

We live in the world that is completely entangled on energy and thus, Humankind can no longer do without it, power. With electricity being the main form of energy today, this has increased the complexity of our life today. In Uganda, electricity generation is mainly through hydropower which put the country in the bottleneck of over dependence on one source of energy. Yet, there are many energy systems out there that country can diversify its electricity generation. Therefore, the need to understand, the level of development and utilization of various energy systems has been the underlying question for this present study. Comprehensive literature survey was conducted from the electronic databases including ScienceDirect, Wiley, Sage, Scopus, Taylor & Francis, and Google Scholar. The publications in form of reports, conference papers, working papers, discussion papers, journal articles, book sections and textbooks were considered in this study. In total, 11 energy systems including human and animal energy, solid biomass (firewood), hydropower, wind, geothermal, solar, nuclear, peat, coal, petroleum, and non-solid biomass (methanol, hydrogen, ethanol, biodiesel, and biogas) are described. The current and the future development and utilization of these energy systems has been described. The challenges with their development and utilization were elaborated and the solution the challenges were presented. The hydropower with River Nile being the main river for large hydropower plant construction is the dominance energy system in Uganda. Nuclear energy will be the salvation for the country’s electric energy supply in the near future. Therefore, Uganda needs to bet big on nuclear energy.

Three-dimensional finite element analyses were performed on closed-ended thick-walled cylinders with a radial cross bore under internal pressure. The aim of this study was to determine the behaviour...

The aim of this study was to establish the effect of cross bore configuration geometry on stress concentration in cross-bored high-pressure vessels. The cross bore geometry parameters with adverse...

Due to a technical error, this article was incorrectly made available as an accepted manuscript and has been temporarily removed. IOP Publishing apologise for the mistake.

The objective of this article is to examine the impacts of molybdenum disulphide (MoS₂) and graphite-filled (Gr) polyetheretherketone (PEEK) composites that have been fabricated through 3D printing on their mechanical properties and crystallinity. Seven samples and thirty-five dog bones were produced using different filament strands to conduct the analysis. Before extrusion into filaments, the solid lubricants, MoS₂, and graphite were uniformly dispersed within the PEEK through mechanical blending. At a concentration of 10 wt., the PEEK/MoS₂ composites exhibited the highest tensile strength, measuring approximately 104MPa, while the PEEK/Gr composites displayed the lowest tensile strength at the same concentration, approximately 36MPa. In addition, the PEEK/MoS₂ composites demonstrated better elongation, approximately 4.7, compared to the PEEK/Gr composites, which exhibited approximately 2.3 elongation. X-ray diffraction (XRD) data revealed that neither MoS₂ nor graphite significantly interacted with the PEEK matrix. The degree of crystallinity, as determined by density matrices, indicated that the printed PEEK composites possessed a higher level of crystallinity, approximately 62 at a concentration of 5 wt., than the calculated values. This suggests that the filament-making and 3D printing processes had an annealing effect. The significance of solid lubricant content and dispersion in shaping the mechanical properties and crystal formation of 3D-printed PEEK composites is emphasized in this study. Furthermore, this research provides valuable insights for optimizing PEEK-based materials for various applications.