We propose a micro geared ultrasonic motor, the smallest set of a micro ultrasonic motor and micro planetary gear. Our micro ultrasonic motor is one of the most powerful motors in one-millimeter-scale motors. The use of a micro planetary gear amplifies the motor torque to several tens of times and the geared motor enables a high torque density that was unachievable by existing miniature motors. The goal of this paper is to analyze the dynamic characteristic of the micro geared ultrasonic motor with a mathematical model and confirm the torque amplification experimentally using a micro planetary gear prototype. To build the microgear components, we employ a micro-injection molding process using metallic glass, a relatively new material, with a low melting temperature. The micro planetary gear assembly with a diameter of 2 mm, a length of 5.9 mm, and a gear ratio of 256 is built and connected to the micro ultrasonic motor. The micro geared ultrasonic motor demonstrates a continuous torque of 0.4 mN·m and a peak torque of 1 mN·m in the load lifting experiments.
1 September 2016 in IEEE Transactions on Control Systems Technology
In this paper, we derive a dynamic model of a spherical rolling robot that has a new driving mechanism equipped with a gyro and design a controller to stabilize a desired translational motion of the robot. Due to the angular momentum of the gyro, nutation motion of the internal mechanism of the robot may be caused. A feedback controller is designed to achieve the stabilization to a straight motion of the robot and nutation damping in the internal mechanism simultaneously. The asymptotic stability is proved using a Lyapunov function, and the effectiveness of the controller is verified by experiments. The controller is also successfully applied to other translational motions such as a circular motion and a meandering motion.
This paper deals with the feedback stabilization problem for a two-wheeled mobile robot which moves in the presence of obstacles. A state feedback controller is proposed based on Lyapunov control. First, we choose a potential function (Lyapunov function) whose value is minimum at a desired point and maximum on the surfaces of obstacles. And then, we construct a control input by multiplying the gradient vector of the potential function by a matrix composed of a negative definite symmetric one and a skew-symmetric one. It is shown that the system with the controller converges to one of critical points of the potential function. When the potential function has some critical points other than the minimum at the desired point, in order to avoid convergence to those points, the controller is modified. As a result, the controlled system converges to the desired point avoiding collision with obstacles.
9 September 2022 in IEEE Robotics and Automation Letters
This letter analyzes the maneuverability of a fixed-wing hybrid Vertical Take-Off and Landing (VTOL) Unmanned Aerial Vehicle (UAV), and proposes a control strategy for back-transitions from fixed-wing mode to rotary-wing mode based on it. Longitudinal aerodynamic forces and moment are modeled to derive a dynamic model of the UAV, and the translational and rotational accelerations that can be generated for the UAV are examined based on the model. To achieve a back-transition with the largest deceleration while maintaining level flight, we search for the best choice of pitch angle and thrust forces for each forward speed by numerical optimization. Flight experiments demonstrate that it is possible to perform a horizontal back-transition while generating a large deceleration with the chosen pitch angles.