The production of a stable and uniform spray is a primary concern in fuel atomization applications, such as in fluid catalytic cracking reactors, directly affecting the process quality and gas emissions. However, depending on nozzle geometry and operating conditions, undesired pulsed spray behavior may occur. This phenomenon originates from the internal multiphase flow interaction in Y-jet nozzles and leads to unstable sprays. Understanding the formation of spray pulsations is challenging due to limited internal flow visualization in the nozzle and the fast dynamics involved. Accordingly, this work elucidates the mechanisms of the pulsed spray formation through 3D transient numerical multiphase simulations inside a mixing chamber. The model is validated against internal pressure measurements and applied to investigate the internal mixing behavior across several operating conditions. Results show that the liquid-to-gas momentum flux ratio governs the internal flow regimes. A higher liquid momentum flux obstructs the gas flow, leading to periodic spray bursts when the gas overcomes the liquid back pressure. The simulations also reveal self-sustained oscillatory flow patterns and cyclic transitions between gas penetration and liquid accumulation, which produce periodic pressure fluctuations and nozzle discharge pulsations. The findings offer valuable guidance for optimizing nozzle operation and geometry to suppress pulsation and improve atomization performance.
Quenching with polymer solutions for steel heat treatment offers adjustable performance and improved ecological impact compared to conventional water or oil quenching. The submersion cooling operation poses challenges due to the intense vapor/polymer film collapse on the component surface, potentially destabilizing batch components. Therefore, controlled recirculation is critical to preventing tank and specimen damage during cooling and ensuring effective steel hardening. However, flow structure analysis is often overlooked and disregarded in industrial tank design. Thus, this study evaluates the tank geometries of two partner industries to determine if they provide the necessary homogeneous flow for optimal quenching. The analysis combines experimental velocity measurements with a numerical model, with the identification of different flow intensity regions being the main outcome of this work. The results suggest that geometric modifications could improve flow recirculation, enhancing quenching performance.