A mathematical model for estimating the risk of airborne transmission of a respiratory infection such as COVID-19 is presented. The model employs basic concepts from fluid dynamics and incorporates the known scope of factors involved in the airborne transmission of such diseases. Simplicity in the mathematical form of the model is by design so that it can serve not only as a common basis for scientific inquiry across disciplinary boundaries but it can also be understandable by a broad audience outside science and academia. The caveats and limitations of the model are discussed in detail. The model is used to assess the protection from transmission afforded by face coverings made from a variety of fabrics. The reduction in the transmission risk associated with increased physical distance between the host and susceptible is also quantified by coupling the model with available and new large eddy simulation data on scalar dispersion in canonical flows. Finally, the effect of the level of physical activity (or exercise intensity) of the host and the susceptible in enhancing the transmission risk is also assessed.
Separating turbulent boundary layers over smooth and rough flat plates are studied by large-eddy simulations. A suction–blowing velocity distribution imposed at the top boundary of the computation domain produces an adverse-to-favourable pressure gradient and creates a closed separation bubble. The Reynolds number based on the momentum thickness and the free-stream velocity before the pressure gradient begins is 2500. Virtual sand grain roughness in the fully rough regime is modelled by an immersed boundary method. Compared with a smooth-wall case, streamline detachment occurs earlier and the separation region is substantially larger for the rough-wall case, due to the momentum deficit caused by the roughness. The adverse pressure gradient decreases the form drag, so that the point where the wall stress vanishes does not coincide with the detachment of the flow from the surface. A thin reversed-flow region is formed below the roughness crest; the presence of recirculation regions behind each roughness element also affects the intermittency of the near-wall flow, so that upstream of the detachment point the flow can be reversed half of the time, but its average velocity can still be positive. The separated shear layer exhibits higher turbulent kinetic energy (TKE) in the rough-wall case, the growth of the TKE there begins earlier relative to the separation point, and the peak TKE occurs close to the separation point. The momentum deficit caused by the roughness, again, plays a critical role in these changes.
The spatio-temporal dynamics of separation bubbles induced to form in a fully developed turbulent boundary layer (with Reynolds number based on momentum thickness of the boundary layer of 490) over a flat plate is studied via direct numerical simulations. Two different separation bubbles are examined: one induced by a suction–blowing velocity profile on the top boundary and the other by a suction-only velocity profile. The latter condition allows reattachment to occur without an externally imposed favourable pressure gradient and leads to a separation bubble more representative of those occurring over airfoils and in diffusers. The suction-only separation bubble exhibits a range of clearly distinguishable modes, including a high-frequency mode and a low-frequency ‘breathing’ mode that has been observed in some previous experiments. The high-frequency mode is well characterized by classical frequency scalings for a plane mixing layer and is associated with the formation and shedding of spanwise-oriented vortex rollers. The topology associated with the low-frequency motion is revealed by applying dynamic mode decomposition to the data from the simulations and is shown to be dominated by highly elongated structures in the streamwise direction. The possibility of Görtler instability induced by the streamwise curvature on the upstream end of the separation bubble as the underlying mechanism for these structures and the associated low frequency is explored.
1 December 2019 in International Journal of Heat and Fluid Flow
When hovering over sandy terrain, the rotor of helicopters generates a downward jet that induces resuspension of dust and debris. We investigate the mechanisms that govern particle resuspension in such flow using an Eulerian–Lagrangian approach based on large-eddy simulation of turbulence. The wake generated by the helicopter is modelled as a vertical impinging jet, to which a sequence of periodically forced azimuthal vortices is superposed. The resulting flow field provides a unique range of flow scales with which the particles can interact. Downstream of the impingement region, layers of negative azimuthal vorticity (secondary vortices) form on the upwash side of the primary azimuthal (large-scale) vortices. These layers then detach from the surface together with the near-wall (small-scale) vortices populating the wall-jet region. We show how the dynamics of sediments is governed by its interaction with these structures. After initial lift off from the impingement surface, particles accumulate in regions where near-wall vortices roll around the impinging azimuthal vortex, forming rib-like structures that either propel particles away from the azimuthal vortex or entrap them in the shear layer between the azimuthal and secondary vortices. We demonstrate that these trapped particles are more likely to reach the outer flow region and generate a persistent cloud of airborne particles. We also show that, in a time-averaged sense, particle resuspension and deposition fluxes balance each other near the impingement surface.
Direct numerical simulation is performed for flow separation over a bump in a turbulent channel. Comparisons are made between a smooth bump and one where the lee side is covered with replicas of shark denticles – dermal scales that consist of a slender base (the neck) and a wide top (the crown). As flow over the bump is under an adverse pressure gradient (APG), a reverse pore flow is formed in the porous cavity region underneath the crowns of the denticle array. Remarkable thrust is generated by the reverse pore flow as denticle necks accelerate the fluid passing between them in the upstream direction. Several geometrical features of shark denticles, including some that had not previously been considered hydrodynamically functional, are identified to form the two-layer denticle structure that enables and sustains the reverse pore flow and thrust generation. The reverse pore flow is activated by the APG before massive flow detachment. The results indicate a proactive, on-demand drag reduction mechanism that leverages and transforms the APG into a favourable outcome.