Terahertz has significant potential applications in biosensing, but its detection sensitivity still needs to be improved. Metamaterials can effectively improve terahertz sensing sensitivity due to their field-enhancing properties. In this work, we designed and fabricated a double-open hexagonal ring metamaterial with a high refractive index sensitivity of 430 GHz/RIU. The resonant properties of metamaterials were demonstrated by both simulations and experiments. The sensing performance were tested with different concentrations of glucose and bovine serum protein solutions. The results showed that the sensitivity of the metamaterial to glucose and bovine serum protein solution reached 0.37 GHz/(mg/dL) and 36.44 GHz/(mg/mL), respectively, while the detection limits of glucose and bovine serum protein solution reached 9.867 mg/dL and 0.16 mg/mL, respectively. The proposed metamaterial sensor has potential application scenarios in the terahertz biomedical field.
The present study introduces a plasmon-induced transparency (PIT) based dual-polarization multifunctional graphene metamaterial operating in the lower terahertz frequency range. It consists of upper-down and left-right rings arranged on the silica surface. The finite element method is employed for numerical calculations, with simulation results illustrating that the proposed metamaterial displays a single PIT window for both x- and y-polarizations. The switch functionality is achieved by tuning the graphene’s Fermi energy level, corresponding to the maximum modulation degree of amplitude attaining 98.9%. As a sensor, the graphene metamaterial exhibits a maximum sensitivity of 208.6 GHz/RIU (Refractive index unit), and as a slow-light device, it possesses a maximum group delay of 8.22 ps. Consequently, dual-polarization metamaterial proves to be the standout candidate in the simultaneous implementation of sensing, switching, signal processing, and optical communication.
<!-- *** Custom HTML *** --> A photonic crystal fiber (PCF) sensor based on surface plasmon resonance with a gold film coating is designed and investigated for detecting the analytes with a low refractive index (RI). The critical geometry parameter is optimized by the finite element method to increase the sensitivity of the sensor. An open-ring structure with a 70-nm-thickness gold film coated on the inner surface is located on the left and right sides of the PCF sensor, and its angle is equal to or greater than 90 deg. The spectral and amplitude sensitivities are numerically calculated to evaluate the sensing performance of the proposed sensor. The simulation results indicate that the maximum and average sensitivities are 68,000 and 9583 nm / RIU, respectively. The resolution is a critical parameter for assessing the sensing performance of the sensor with a maximum value of 1.47 × 10 − 6 RIU. The simulation results show that the RI of analytes that the sensor can detect ranges from 1.20 to 1.31. Therefore, the sensor possesses wide application prospects in the field of biosensors.
In this work, we propose a metamaterial based on plasmon-induced transparency for the detection of glucose solutions. The unit cell structure of this metamaterial comprises of two rectangular strips and a pair of "arch-bridge" shaped structures fabricated on a silicon dioxide surface. Simulation results indicate that the biosensor exhibits two resonance frequencies at 1.71 and 2.30 THz, respectively, with a sensitivity of 471.43 GHz/RIU (refractive index unit) at the higher frequency resonance. The sensor fabrication is accomplished through photolithography and its performance is validated with a commercial terahertz time-domain spectrometer. Glucose solutions of five different concentrations are prepared for testing. Experimental results demonstrate that at the higher frequency resonance, the sensor exhibits a sensitivity of 6.63 GHz/(mmol/L) and a limit of detection of 0.0890 mmol/L. This indicates the sensor’s high sensitivity to glucose solutions. Hence, this study presents a potential alternative for glucose detection, with implications for early diabetes monitoring.
The hyperspectral infrared observations of the Geostationary Interferometric Infrared Sounder (GIIRS) on the Fengyun-4A (FY-4A) satellite are an important data source for numerical weather prediction (NWP) assimilation. However, there are systematic differences between observed and simulated brightness temperatures (i.e., the observation increments contain predictable systematic bias components). To address the issue that traditional linear methods struggle to capture the nonlinear relationships between biases and forecast predictors, this study proposes an intelligent bias correction method that integrates ensemble learning and explainable artificial intelligence. First, the entropy reduction method is used to select 69 mid-wave channels. Then, Random Forest, XGBoost, LightGBM, Decision Tree, and Extra Tree are used as base learners to construct a weighted average ensemble model. Training and validation are conducted using high-frequency clear-sky observation data from FY-4A/GIIRS during Typhoon Lekima. The results show that: (1) the ensemble learning correction method outperforms single models and traditional offline methods, with root mean square errors of brightness temperature bias of less than 0.9209 K for the training set and 1.4447 K for the test set; (2) Shapley Additive Explanations (SHAP)-based interpretability analysis reveals the contribution and nonlinear influence mechanisms of factors such as longitude, atmospheric thickness, surface temperature, and total precipitable water on bias correction. This study provides an intelligent bias correction framework with both high precision and explainability, offering a reference for the bias correction and assimilation applications of hyperspectral satellite observations like GIIRS.
Terahertz (THz) waves are characterized by low photon energy, sensitivity to polar molecules, and different spectral responses to many biomolecules, which are of great research and application value in the biomedical field. Metamaterials are very sensitive to changes in the dielectric environment of their surfaces and have great potential in the field of sensing. Aiming at the current needs of terahertz-band biosensors whose sensitivity still needs to be improved, we propose an open-ring resonator biosensor with an asymmetric structure of discontinuous dielectric layers. Simulation results show that the refractive index sensitivity of this discontinuous dielectric layer metamaterial biosensor can reach up to 605 GHz/RIU, it exhibits a figure of merit (FOM) value of 24.2 RIU-1 and a high quality (Q) factor of 79.8, indicating a high Q factor and an ultra-high sensitivity. These characteristics are significant in the design of terahertz ultra-sensitive biosensors, showcasing their valuable application potential.