Single-cell mass cytometry, also known as cytometry by time of flight (CyTOF) is a powerful high-throughput technology that allows analysis of up to 50 protein markers per cell for the quantification and classification of single cells. Traditional manual gating utilized to identify new cell populations has been inadequate, inefficient, unreliable, and difficult to use, and no algorithms to identify both calibration and new cell populations has been well established. A deep learning with graphic cluster (DGCyTOF) visualization is developed as a new integrated embedding visualization approach in identifying canonical and new cell types. The DGCyTOF combines deep-learning classification and hierarchical stable-clustering methods to sequentially build a tri-layer construct for known cell types and the identification of new cell types. First, deep classification learning is constructed to distinguish calibration cell populations from all cells by softmax classification assignment under a probability threshold, and graph embedding clustering is then used to identify new cell populations sequentially. In the middle of two-layer, cell labels are automatically adjusted between new and unknown cell populations via a feedback loop using an iteration calibration system to reduce the rate of error in the identification of cell types, and a 3-dimensional (3D) visualization platform is finally developed to display the cell clusters with all cell-population types annotated. Utilizing two benchmark CyTOF databases comprising up to 43 million cells, we compared accuracy and speed in the identification of cell types among DGCyTOF, DeepCyTOF, and other technologies including dimension reduction with clustering, including Principal Component Analysis (PCA), Factor Analysis (FA), Independent Component Analysis (ICA), Isometric Feature Mapping (Isomap), t-distributed Stochastic Neighbor Embedding (t-SNE), and Uniform Manifold Approximation and Projection (UMAP) with k-means clustering and Gaussian mixture clustering. We observed the DGCyTOF represents a robust complete learning system with high accuracy, speed and visualization by eight measurement criteria. The DGCyTOF displayed F-scores of 0.9921 for CyTOF1 and 0.9992 for CyTOF2 datasets, whereas those scores were only 0.507 and 0.529 for the t-SNE+k-means; 0.565 and 0.59, for UMAP+ k-means. Comparison of DGCyTOF with t-SNE and UMAP visualization in accuracy demonstrated its approximately 35% superiority in predicting cell types. In addition, observation of cell-population distribution was more intuitive in the 3D visualization in DGCyTOF than t-SNE and UMAP visualization. The DGCyTOF model can automatically assign known labels to single cells with high accuracy using deep-learning classification assembling with traditional graph-clustering and dimension-reduction strategies. Guided by a calibration system, the model seeks optimal accuracy balance among calibration cell populations and unknown cell types, yielding a complete and robust learning system that is highly accurate in the identification of cell populations compared to results using other methods in the analysis of single-cell CyTOF data. Application of the DGCyTOF method to identify cell populations could be extended to the analysis of single-cell RNASeq data and other omics data.

Emerging CRISPR–Cas9 technology permits synthetic lethality (SL) screening of large number of gene pairs from gene combination double knockout (CDKO) experiments. However, the poor integration and annotation of CDKO SL data in current SL databases limit their utility, and diverse methods of calculating SL scores prohibit their comparison. To overcome these shortcomings, we have developed SL knowledge base (SLKB) that incorporates data of 11 CDKO experiments in 22 cell lines, 16,059 SL gene pairs and 264,424 non-SL gene pairs. Additionally, within SLKB, we have implemented five SL calculation methods: median score with and without background control normalization (Median-B/NB), sgRNA-derived score (sgRNA-B/NB), Horlbeck score, GEMINI score and MAGeCK score. The five scores have demonstrated a mere 1.21% overlap among their top 10% SL gene pairs, reflecting high diversity. Users can browse SL networks and assess the impact of scoring methods using Venn diagrams. The SL network generated from all data in SLKB shows a greater likelihood of SL gene pair connectivity with other SL gene pairs than non-SL pairs. Comparison of SL networks between two cell lines demonstrated greater likelihood to share SL hub genes than SL gene pairs. SLKB website and pipeline can be freely accessed at https://slkb.osubmi.org and https://slkb.docs.osubmi.org/, respectively.

Synthetic lethality (SL) has shown great promise for the discovery of novel targets in cancer. CRISPR double-knockout (CDKO) technologies can only screen several hundred genes and their combinations, but not genome-wide. Therefore, good SL prediction models are highly needed for genes and gene pairs selection in CDKO experiments. However, lack of scalable SL properties prevents generalizability of SL interactions to out-of-sample data, thereby hindering modeling efforts. In this paper, we recognize that SL connectivity is a scalable and generalizable SL property. We develop a novel two-step multilayer encoder for individual sample-specific SL prediction model (MLEC-iSL), which predicts SL connectivity first and SL interactions subsequently. MLEC-iSL has three encoders, namely, gene, graph, and transformer encoders. MLEC-iSL achieves high SL prediction performance in K562 (AUPR, 0.73; AUC, 0.72) and Jurkat (AUPR, 0.73; AUC, 0.71) cells, while no existing methods exceed 0.62 AUPR and AUC. The prediction performance of MLEC-iSL is validated in a CDKO experiment in 22Rv1 cells, yielding a 46.8% SL rate among 987 selected gene pairs. The screen also reveals SL dependency between apoptosis and mitosis cell death pathways.

Background/Objectives: Triple-negative breast cancer (TNBC) accounts for 15 to 20% of breast cancer cases and contributes to a disproportionate 35% of breast cancer deaths. Its resistance to chemotherapy presents a significant challenge. Methods: We firstly compared transcriptomic profiles between TNBC cell lines and patient samples and inferred the MDA-MB-231 cell line as the most representative model for TNBC with poor response to chemotherapy. We then conducted a genome-wide CRISPR-Cas9 screening and RNA-seq analysis in MDA-MB-231. Results: This analysis revealed 96 and 93 genes that could re-sensitize cisplatin and doxorubicin treatment, respectively, with 19 overlapping genes. Among these genes, 28 have been studied and published previously in chemoresistance research. MCM9 was found as a new TNBC chemoresistance target. Its target drug, KPT-185, showed an additive effect with cisplatin in treating TNBC cells. In the follow-up gene combination double-knockout experiment among 65 genes selected from cell death pathways, 242 synthetic lethal gene pairs were discovered to overcome chemoresistance in TNBC. Conclusions: In this study, we identified synthetic lethal targets in treating TNBC with cisplatin and doxorubicin through a genome-wide CRISPR-Cas9 screening and gene combination double-knockout screening.

Background: Single-cell mass cytometry, also known as cytometry by time of flight (CyTOF) is a powerful high-throughput technology that allows analysis of up to 50 protein markers per cell for the quantification and classification of single cells. Traditional manual gating utilized to identify new cell populations has been inadequate, inefficient, unreliable, and difficult to use, and no algorithms to identify both calibration and new cell populations has been well established. Methods: A deep learning with graphic cluster (DGCyTOF) visualization is developed as a new integrated embedding visualization approach in identifying canonical and new cell types. The DGCyTOF combines deep-learning classification and hierarchical stable-clustering methods to sequentially build a tri-layer construct for known cell types and the identification of new cell types. First, deep classification learning is constructed to distinguish calibration cell populations from all cells by softmax classification assignment under a probability threshold, and graph embedding clustering is then used to identify new cell populations sequentially. In the middle of two-layer, cell labels are automatically adjusted between new and unknown cell populations via a feedback loop using an iteration calibration system to reduce the rate of error in the identification of cell types, and a 3-dimensional (3D) visualization platform is finally developed to display the cell clusters with all cell-population types annotated. Results: Utilizing two benchmark CyTOF databases comprising up to 43 million cells, we compared accuracy and speed in the identification of cell types among DGCyTOF, DeepCyTOF, and other technologies including dimension reduction with clustering, including Principal Component Analysis ( PCA ), Factor Analysis ( FA ), Independent Component Analysis ( ICA ), Isometric Feature Mapping ( Isomap ), t-distributed Stochastic Neighbor Embedding ( t-SNE ), and Uniform Manifold Approximation and Projection ( UMAP ) with k -means clustering and Gaussian mixture clustering. We observed the DGCyTOF represents a robust complete learning system with high accuracy, speed and visualization by eight measurement criteria. The DGCyTOF displayed F-scores of 0.9921 for CyTOF1 and 0.9992 for CyTOF2 datasets, whereas those scores were only 0.507 and 0.529 for the t-SNE + k-means ; 0.565 and 0.59, for UMAP + k-means . Comparison of DGCyTOF with t-SNE and UMAP visualization in accuracy demonstrated its approximately 35% superiority in predicting cell types. In addition, observation of cell-population distribution was more intuitive in the 3D visualization in DGCyTOF than t-SNE and UMAP visualization. Conclusions: The DGCyTOF model can automatically assign known labels to single cells with high accuracy using deep-learning classification assembling with traditional graph-clustering and dimension-reduction strategies. Guided by a calibration system, the model seeks optimal accuracy balance among calibration cell populations and unknown cell types, yielding a complete and robust learning system that is highly accurate in the identification of cell populations compared to results using other methods in the analysis of single-cell CyTOF data. Application of the DGCyTOF method to identify cell populations could be extended to the analysis of single-cell RNASeq data and other omics data. Availability and implementation: A Python package (Python 3) and analysis scripts for reproducing the results are available at https://lijcheng12.github.io/DGCyTOF/ . DGCyTOF python package contact: Lijun.cheng@osu.edu . Supplementary information: Supplementary data are available at journal **** online. Key points: DGCyTOF has been developed for the automatic identification of known and new cell populations. Optimal dimension reduction that integrates graphic-clustering technology facilitates highly accurate identification of new cell populations. Use of a feedback-calibration system can enhance the homology of cell types for the identification of cell populations. Three-dimensional visualization technology allows vivid depiction of cell types to improve their classification.