Tethered Space Net Robot (TSNR) has been proposed as a promising method for active space debris capturing and removal since space debris have posed a big threat to operational satellites and astronauts. After contacting the debris, the net cannot naturally wrap around the debris, especially when the debris does not contact the net in the center. Thus, it is worth investigating the net closing control of TSNR. Two requirements should be satisfied in the net closing control algorithm. First, the control algorithm should make the net close around the debris in a very short time to avoid the escape of the debris. Second, the control input should be continuous to avoid the oscillations of net tether caused by high-frequency control instructions. Based on the two requirements, an impulsive adaptive super-twisting (IASTW) sliding mode control scheme is proposed to complete the net closing action. The control scheme can drive the state vectors convergence to the origin in a short time and keep it there thereafter. The numerical simulation results illustrate the efficiency of the proposed control algorithm, in which the two requirements are all satisfied.
25 December 2023 in IEEE Transactions on Aerospace and Electronic Systems
The feasibility analysis and performance optimization are great challenges of underactuated deployment of tethered space robot. This paper presents an investigation into the feasibility condition optimization and stability analysis of the underactuated deployment, and proposes a feasibility-judgment-based human-assisted regulation scheme via the fast logarithmic sliding mode. The feasibility condition is generated by synthesizing a hierarchical sliding manifold, on which the in-plane angle and deployment length are synchronous, into the Lyapunov stability criterion, and optimized by a moving horizon optimization algorithm. Based on the feasibility condition, a tension control scheme is proposed to ensure that no saturated tension commands appear during the deployment. For the convenience of supervision, this paper proposes a mechanism, which is derived from the desired admittance structure, to allow the human-assisted regulation to adjust the parameters of feasibility condition via a type of physical human-robot interaction. The fast logarithmic sliding mode control is proposed to stabilize the human-centric pHRI, the operation behavior of which is estimated by neural network. The effectiveness of the proposed scheme is verified through simulations and experiments.
15 July 2022 in IEEE Transactions on Aerospace and Electronic Systems
Proximity operation can significantly improve the efficiency of eddy current de-tumbling. However, the tumbling motion and non-cooperation of space debris make the chaser execute collision avoidance maneuvers and be influenced by model uncertainty. In this paper, an inertial-oriented safety corridor is proposed by taking the debris' angular momentum as the central axis, which can avoid the frequent collision maneuvers of the chaser. Meanwhile, a desired de-tumbling trajectory under this safety corridor is designed to de-tumble the angular velocity of space debris. Then, a robust output-feedback controller considering safety corridor and model uncertainty is proposed by combining moving horizon estimation and model predictive control. The moving horizon estimation is employed to estimate the system state and model uncertainty which is compensated by a feedforward control law. Furthermore, the model predictive control without terminal ingredients is designed to realize the optimal performance of fuel consumption and the robust tracking stability of the system. Finally, taking the Chinese Sinosat-2 satellite as the simulation case, the effectiveness of the proposed scheme is verified.
This article presents a data-driven scheme that integrates moving horizon estimation (MHE) with sampled-data admittance-based control to stabilize physical human–robot interaction (pHRI). The proposed MHE employs data-driven parameterizations based on a single historical trajectory to reconstruct the interaction dynamics response, as ensured by the extended Willems’ fundamental lemma. To mitigate instability in pHRI systems that may arise from noise-contaminated velocity measurements, we implement an online velocity update mechanism grounded in optimal estimation. The sampled-data approach establishes an appropriate sampling interval, facilitating collaboration between the locally linearized pHRI dynamics and MHE for the generation of data-driven velocity. To validate the effectiveness of the proposed method, we performed numerical simulations and experiments using a three-degrees of freedom (DoF) Phantom Omni haptic manipulator, which demonstrated superior transient and steady-state tracking performance.
20 May 2024 in IEEE Transactions on Aerospace and Electronic Systems
On-orbit services for large non-cooperative debris have significant benefits for the sustainable development of the aerospace industry. However, the tumble motion and various shapes of debris seriously threaten the implementation of on-orbit service technology. This paper takes the ultra-close range eddy current de-tumbling scenario as an example and proposes a quantitative collision risk assessment method named G aussian M ixture M odel Based C ollision R isk A ssessment (GMMCRA) to ensure the safety of ultra-close range operation. In this method, the inertial-oriented keep-out zone is employed to deal with the tumble motion of debris. The Gaussian Mixture Model (GMM) is utilized to construct precise keep-out zones for the arbitrarily shaped debris and the chaser. Then, a collision incidence function is defined to quantitatively depict the collision risk between the debris and the chaser. Besides, the collision detection criterion is given by the threshold of the collision incidence. Finally, numerical simulations are conducted, and the effectiveness of the proposed schemes is verified.