This research studies the effect of the addition of graphene nanoplatelets (GnPs) on the mechanical behaviour of composite pipe materials exposed to hydrothermal ageing, aiming to increase their service life. For this reason, 0.25 wt.% GnPs reinforced and unreinforced filament wound basalt fibre reinforced epoxy composite pipes (BFRPs) were produced. BFRPs were exposed to a hydrothermal ageing process in order to examine the effects of water absorption behaviour on mechanical properties. Hydrothermal ageing processes were carried out by immersing the samples in distilled water at 80°C for different periods such as 15, 30, 45 and 60 days. Following the ASTM standards, the tensile, density and hardness properties of water-exposed GnPs reinforced and unreinforced BFRPs were examined and compared with unexposed specimens. As a result, while water absorption caused a remarkable loss in the mechanical properties of BFRPs, the adverse effects of water absorption on mechanical properties were minimized by the presence of GnPs.
This study aims to investigate the low-velocity impact response of boron nitride nanoparticles (BNNPs) added carbon fiber reinforced pipes (CFRPs) at various temperature values. Carbon fiber/epoxy composite specimens with (±55°)3 winding angles were manufactured with the filament winding method. Low-velocity impact tests were performed with a 15 J energy level at five different temperatures between −196°C and 23°C ranges to understand the cryogenic environment effect on BNNP added carbon fiber reinforced tubes and neat carbon fiber reinforced tubes. The force-displacement and contact force-time graphs were attained in consequence of low-velocity impact tests. The damage areas, their size and characteristics were scrutinized both visually and with the aid of a Microscope. The test results showed that when ambiance temperatures decreased, the damage areas considerably increased both filled with BNNP and without BNNP filament wound carbon fiber reinforced tubes.
9 December 2021 in Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science
Aluminum is a material with advantageous properties such as lightness, good conductivity, high plastic deformation ability, and superior corrosion resistance. However, aluminum and many aluminum alloys have disadvantages in terms of mechanical properties such as hardness, tensile strength, and wear resistance. To overcome this disadvantage of aluminum, it is a good method to add ceramic particles to the matrix. For this purpose, in this study, B4C (boron carbide)-reinforced AA2014 aluminum matrix composites were fabricated at 3%, 5%, and 7% reinforcement ratios using the stir casting method. Tensile tests, wear tests, cutting force measurements, and microhardness measurements were performed to determine the fabricated composite materials’ mechanical properties. Scanning electron microscopy and optical microscopy were used to analyze the microstructure of composite. X-ray diffraction analysis was utilized to study the phase identification. As a result of the study, it was observed that with the increase in the B4C reinforcement ratio, the mechanical properties of the aluminum matrix composite material, such as wear resistance, cutting strength, and hardness, increased. On the other hand, the change in tensile strength did not occur in this way. Tensile strength first increased and then decreased. The highest value of tensile strength was achieved at 5% B4C reinforcement. X-ray diffraction results showed that AA2014 and B4C were the fundamental elements in composites and are free from intermetallics.
The present study examines the influence of polyamide 6.6 (PA 6.6) nanofiber and MWCNTs reinforcements on the mechanical behavior of nanocomposite plates formed by hybridization of carbon fabric (CF) and kevlar fabric (KF). First, PA 6.6 nanofibers were manufactured by electrospinning. The produced nanofibers were placed in the interlaminar of nanocomposite plates. PA 6.6 nanofiber and MWCNT‐reinforced nanocomposite plates consisting of 12 layers were produced by the vacuum bagging method. Tensile, Mode‐II fracture and bending tests were applied to the produced composite plates in accordance with the standards. After the mechanical tests, the nanocomposite plates' macro and micro damage analysis was performed. As a result of the reinforcement of PA 6.6, MWCNTs and PA 6.6‐MWCNTs, the tensile strength, interlaminar fracture toughness and bending strength of the nanocomposite plates significantly enhanced compared to unreinforced samples. In addition, interlaminar crack propagation in reinforced samples became more stable than in the unreinforced sample.Highlights: Investigated the impact of PA 6.6 nanofiber and MWCNT reinforcements on nanocomposite plates formed through CF and KF hybridization. Reinforcement with PA 6.6, MWCNTs, and PA 6.6‐MWCNTs significantly improved tensile strength, interlaminar fracture toughness, and bending strength. Mode‐II interlaminar fracture toughness tests demonstrated enhanced crack propagation stability with PA 6.6 nanofiber and MWCNT reinforcements.
Composite materials are widely preferred in the aviation, automotive, construction and maritime industries due to their many superior properties. As a result of this widespread use, composite structures are inevitably subjected to various environmental conditions. Various environmental conditions may negatively affect the mechanical performance of the structure, and the structure may become unable to maintain its initial mechanical properties, especially in the face of critical loading, such as low‐velocity impacts. This research investigated the influence of various environmental conditions on the low‐velocity impact strength of composite materials. 12‐layer plate samples with epoxy matrix reinforced with woven glass fabric (GF), woven carbon fabric (CF), and hybrid fabric (HF), where the two fabrics are used together, were produced. Low‐velocity impact tests were conducted to these specimens at 20 and 40 J energy levels. Damages occurring in the material as a result of the low‐velocity impact test were interpreted using high‐resolution camera and optical microscope images. Force‐time and force‐ displacement curves were drawn and interpreted. It was concluded that as the impact energy values increased, the maximum force and displacement values also increased.Highlights: The influence of various environmental conditions to which composite materials may be exposed on the dynamic response of the structure has been investigated. Various environmental conditions significantly affected the composite structure's impact behavior. While glass fabric (GF) composite samples were more affected by the seawater environment, carbon fabric (CF) composite samples were more affected by the HCl environment. Hybrid (HF) composite samples were affected by seawater and HCl in approximately equal amounts.