Traps, such as dislocation cores, foreign atoms, surfaces of nano-precipitates, etc, can significantly influence the kinetics of diffusion of interstitial atoms in a crystal lattice. Trapping is reflected in the chemical diffusion coefficient, whose value can be up to several orders of magnitude lower than the corresponding diffusion coefficient in a trap-free system. If we consider trapping only at dilute foreign atoms, we may assume only one sort of traps in the system, the depth of which is characterized by ΔE (trapping enthalpy) given by the decrease in energy due to trapping of one mole of interstitials. In this paper, a rigorous thermodynamically based concept is offered to extract the value of trapping enthalpy ΔE from chemical potentials of interstitial atoms which are, for instance, available in the form of CALPHAD-type thermodynamic databases. Exemplarily, the values of ΔE for C-trapping at Cr impurities are evaluated. For comparison, trapping enthalpies of C at various typical alloying elements in steel are also extracted and compared with literature values. The chemical diffusion coefficient of C in an Fe–Cr–C system at 500 °C is calculated for different mole fractions of C and Cr atoms. The influence of traps on diffusion becomes evident from this analysis.
Vacancies are the simplest type of lattice defect. However, they play a major role in the kinetics of diffusional processes, such as solid-state precipitation, where mass transport is directly proportional to the concentration of vacancies. We present a physical modelling framework, where we simulate the evolution of excess vacancies on the example of Al-alloys during simplified time-temperature treatments. Interaction energies between solute atoms and vacancies are evaluated by first-principle analysis. Assuming that the escape of vacancies from existing traps is dependent on temperature and binding energies, we explore the life-time of non-equilibrium vacancies and the natural and artificial aging response of Al alloys. The predictions of the model are finally compared to experimental data.
12 August 2014 in Modelling and Simulation in Materials Science and Engineering
The bake hardening response (BHR) of a dual‐phase steel with a martensite volume fraction of 0.22 is studied by means of mechanical testing, microstructural characterization, and computational simulation. After austenitization and quenching, the material is exposed to temperatures between 100 and 220 °C for times up to 10 000 min. The increase in yield strength during bake hardening (BH) follows the well‐known two‐stage characteristics. Herein, the kinetics of BH is analyzed on the basis of computational models for the formation of Cottrell atmospheres and precipitation, which represent the cause of strength increase, as well as the long‐range diffusion of C, which is partitioning between the martensite and ferrite phases during aging. The simulated yield strength evolution is in good agreement with the experiments. The model clearly describes the shape of the experimentally observed BH curves as a function of temperature, time, and degree of prestrain. In contrast to previous simulation attempts, all metallurgical phenomena are treated as coupled processes and modeled in an integrated framework based on a single set of input and state parameters.