Flood-resilient spatial planning in urban areas involves designing and implementing structural and nonstructural measures. For the latter, urban planners apply a precautionary principle, which is normally not grounded in the actual performance of the urban drainage system (UDS). This approach, however, fails during weather extremes with heavy precipitation. This paper presents a new concept for reducing pluvial flood risks in the urban planning process. The novelty of the developed planning support system named Extreme Weather Layer (EWL) is that it creates dynamic interlinkages between land developments, the performance of UDS, and other factors that contribute to flood risk. The EWL is built on the digital twin of the existing UDS and delivers an easy-to-use concept, where the end user can analyze hydraulic modelling results interlinked with climate scenarios using the GIS platform. This allows planning specialists to consider land use and soil types in the urban environment to simulate the response of the storm water system and the catchments to different rainfall events. This proposed approach was piloted in Haapsalu (Estonia) and Söderhamn (Sweden). The resulting planning support system, which performs as a set of layers within municipalities’ GIS, allows decision makers to understand and predict the impact of various spatial planning decisions on the pluvial flood risk.
23 February 2015 in Hydrology and Earth System Sciences
In this paper, we estimate the surface water retention of nitrogen (N) in all the 117 drainage basins to the Baltic Sea with the use of a statistical model (MESAW) for source apportionment of riverine loads of pollutants. Our results show that the MESAW model was able to estimate the N load at the river mouth of 88 Baltic Sea rivers, for which we had observed data, with a sufficient degree of precision and accuracy. The estimated retention parameters were also statistically significant. Our results show that around 380 000 t of N are annually retained in surface waters draining to the Baltic Sea. The total annual riverine load from the 117 basins to the Baltic Sea was estimated at 570 000 t of N, giving a total surface water N retention of around 40%. In terms of absolute retention values, three major river basins account for 50% of the total retention in the 117 basins; i.e. around 104 000 t of N are retained in Neva, 55 000 t in Vistula and 32 000 t in Oder. The largest retention was found in river basins with a high percentage of lakes as indicated by a strong relationship between N retention (%) and share of lake area in the river drainage areas. For example in Göta älv, we estimated a total N retention of 72%, whereof 67% of the retention occurred in the lakes of that drainage area (Lake Vänern primarily). The obtained results will hopefully enable the Helsinki Commission (HELCOM) to refine the nutrient load targets in the Baltic Sea Action Plan (BSAP), as well as to better identify cost-efficient measures to reduce nutrient loadings to the Baltic Sea.
The purpose of the study was to present an automated module for the calibration of urban drainage system models. A prepared tool based on the Open Water Analytics toolkit included 12 additional calibration parameters as compared to the existing similar solutions. The module included a gradient optimization method that allowed adjustment of up to five parameters simultaneously, and a trial-and-error method that provided the possibility of testing one or two parameters. The user interface was built in MS Excel to simplify use of the developed tool. The user can select preferable parameters for calibration, choose the optimization method, and determine the limits for the calculated values. The performance and functionality of the automatic calibration module was tested in two scenarios using the drainage model of a 10 ha heavily developed area in Tallinn, Estonia. The calibration results revealed that the maximum deviation between the modelled and measured flow rates was less than 5% for both cases. This is a reasonably good fit for drainage models, which typically encounter numerous uncertainties. Therefore, it was concluded that the module can be successfully used for calibrating hydraulic models created in SWMM5.
Flow dynamics in a pipe with an abrupt change in diameter was experimentally and numerically analyzed. Two-dimensional stationary Reynolds-averaged Navier–Stokes (RANS) k–ε epsilon model was used to describe the development of axial and radial velocity and turbulent kinetic energy in two cases. The theoretical results were compared with experimental findings gained in a transparent pipe test rig. Particle image velocimetry (PIV) technique was used to analyze the development of flow in a pipe with complex geometry. The measured and modeled velocities and turbulent kinetic energy were found to be in good agreement. The two-dimensional stationary RANS k–ε model is suitable for the analysis of the flow dynamics in real old rough pipes where the pipe wall build-up leads to changes in the actual diameter of the pipe but the flow can still be considered axially symmetrical.
17 July 2017 in Journal of Water Supply: Research and Technology—AQUA
The statistical model MESAW was used to estimate the diffuse unit-area source emission coefficients of nitrogen in Estonian rivers. The input data included monitored riverine loads, point sources and land use categories from a total of 50 rivers/catchment areas. Two independent studies were conducted: the estimation of emission coefficients for the whole of Estonia and for a smaller study area near Tallinn. The results from both cases showed that drained peat soils were the highest diffuse source contributor in unit-area loads. The results show that the unit-area loads from drained peat soils were up to 2.3 times higher than from arable land. Moreover, a comparison of emission coefficients for the whole of Estonia and for the Tallinn catchment area indicated that coefficients can vary significantly between sources and single years. Additional detailed studies and monitoring are needed to support these conclusions.