Hexagonal close-packed (HCP) metals, particularly Zirconium (Zr), Titanium (Ti), and Magnesium (Mg) alloys, have attracted significant attention due to their unique properties and wide-ranging applications in the aerospace, biomedical, and energy industries. This review paper provides a comprehensive analysis of the microstructural and textural evolution in these HCP materials under various conditions, including rolling, extrusion, drawing, and annealing. The focus of the present work lies on the deformed microstructure and texture development in HCP metals, thus elucidating the fundamental mechanisms that govern their response to mechanical stress. The interaction between dislocation movements, twinning, and slip systems is discussed in detail, illustrating how these factors contribute to the anisotropic behavior characteristic of low-symmetry HCP structures. Unlike high-symmetry metals, deformation in Zr alloys depends on the activation of various slips and twin deformation modes, which are sensitive to crystallographic orientation and strain. Like Zr, Ti alloys present a more complex deformation behavior, heavily influenced by their crystallographic orientation. The most common deformation textures in Ti alloys include split-transverse direction (split-TD), split-rolling direction (split-RD), and normal direction (ND) symmetric basal fiber textures. These textures emerge due to the activation of multiple slip systems and twinning, which are dependent on external factors such as temperature, strain rate, and alloy composition. For Mg alloys, the poor formability and brittleness associated with the dominance of the basal slip system under ambient conditions is a critical material development challenge. The activation of non-basal slip systems introduces complexities in controlling texture and microstructure. However, their activation is crucial for optimizing mechanical properties such as strength and fatigue resistance. The tendency for twinning in Mg alloys further complicates their deformation behavior, leading to challenges in ensuring uniform mechanical performance. Modifying the alloy composition, grain size, and texture can additionally influence the activation of these deformation mechanisms. This review further explores the roles of dynamic recrystallization and grain growth in tailoring mechanical properties, with a particular focus on microstructure and texture evolution during annealing. Through this detailed review, we aim to present a thorough understanding of the microstructural and textural evolution in HCP materials, thereby guiding future research and industrial applications.

Plane strain compression tests were performed on grain-oriented (GO) and non-grain-oriented steel specimens of identical silicon content. Though Arrhenius type constitutive equations showed excellent predictability of the experimental flow stresses, there were clear differences in the flow curves of the respective grades. More specifically, GO steel had higher flow stress and work hardening and showed clear presence of dynamically recrystallized grains. All these were attributed to the higher (0.06 versus 0.003 wt-%) carbon content and corresponding presence of austenite, at elevated temperatures, in the GO steel specimens.