Purpose: Agricultural work in Colombia, particularly in small and medium-sized farms, is lagging behind in terms of technology; advances such as precision agriculture (PA) are unknown. This project managed to promote the implementation of PA technologies in the primary tasks of land adaptation, by comparing efficiency indices when conventional practices were used against the use of new technologies. Theoretical framework: The company CasaToro SA, with its John Deere® agricultural line, allowed the implementation of StarFire TM6000®, 4240® Monitors, Auto Track 200®, and JDLink® technologies, and the use of T3RRA CUTTA® software, in tractors of its brand in different farms in Tolima, Colombia. Method/design/approach: Measurements of time and area worked in situ were taken and the data obtained were statistically compared using Analysis of Variance (ANOVA). Results and conclusion: Finding significant differences in tasks such as contour line drawing, which reported a decrease of up to 30% in the time needed in h ha–1, and in primary tillage with discs with increases of up to 13% of the tilled area in ha h–1. Research implications: In conclusion, in Tolima, which has extensive areas of agricultural production, the implementation of PA can improve yields and reduce production costs. Originality/value: To demonstrate the benefits of PA.
Wheat (Triticum aestivum L.) is a key crop in Spain, especially in Castilla and León Region. However, there are few studies evaluating predictive models based on spectral indices and multivariate analysis to estimate yield in direct seeding (DS) and conventional seeding (CS) systems. This study addresses this need by implementing a split-plot experimental design in the city of Palencia, Spain, analyzing crop physiological data and nine spectral indices derived from multispectral aerial images captured by drones. The analysis included multivariate techniques such as Principal Component Analysis (PCA) and Random Forest (RF), supplemented with statistical tests, ROC curves, and prediction analysis. The results showed that the RF model successfully classified treatments with 93.75% accuracy and a Kappa index of 0.875, highlighting performance, nitrogen, and protein as key variables. Among the vegetation indices, the Soil-Adjusted Vegetation Index (SAVI) and the Advanced Vegetation Index (AVI) were the most relevant in the flowering stage, with ROC curve values of 0.7778 and 0.8025, respectively. Spearman’s correlations confirmed a significant relationship between these indices and key physiological variables, allowing to distinguish between DS and CS systems. The RF-based prediction model for performance showed R2 values above 91% in the indices with the highest correlation. However, predictive capacity was higher in DS, suggesting that conditions inherent in non-mechanized handling significantly influence model performance. This highlights the importance of using non-destructive procedures to estimate production, enabling the development of adaptive and sustainable strategies that contribute to efficient agricultural production, since it is possible to anticipate crop yields before harvest, optimizing resources such as fertilizers and water.
28 March 2024 in International Journal of Innovative Research and Scientific Studies
This numerical study was conducted to assess the experimental bench structure’s adequacy for measuring mechanical vibrations. The bench allows for three types of tests: dynamic imbalance of a single flywheel, dynamic imbalance of dual flywheels, and dynamic imbalance due to defective gears. A CAD (Computer-Aided Design) model of the vibration bench was developed in three distinct configurations. We then conducted structural (static) and dynamic (non-linear) analyses to assess the structural integrity of the bench, its components, and the expected vibration amplitudes during testing. Additionally, the structure’s natural frequencies were determined, and their compatibility with the expected excitation frequencies was confirmed. These assessments were executed using finite element models within the Solidworks Simulation™ framework. The findings indicate that, when designing such machinery, it is crucial to ensure that the vibration modes do not coincide with the excitation frequencies, as this can compromise the experimental results. Consequently, we have proposed and accessed two redesigned versions of the bench to ensure structural integrity and prevent resonance during experimental procedures. The redesigns aim to mitigate the risk of resonance by altering the bench’s structural parameters to shift the natural frequencies away from the range of excitation frequencies. This proactive approach is based on the idea that a big difference between the natural and excitation frequencies lowers the chance of resonance, which makes the results of the experiment more reliable. The enhanced designs were subjected to a series of rigorous simulations to validate their performance, ensuring that they meet the stringent requirements for educational and research applications.
1 September 2026 in Chilean journal of agricultural & animal sciences
Coffee is one of the most representative agricultural products of Colombia and worldwide, particularly in the Huila Department, due to its high production and excellent quality. As coffee is a crop of high economic value and is increasingly affected by the impacts of climate change, it is essential that the nursery stage contributes to improved crop development and resilience. In order to promote and encourage new practices among coffee growers in the region, this study aimed to evaluate the effects of arbuscular mycorrhizal fungi inoculation (Glomus intraradices) in a coffee nursery located in the municipality of Hobo, Huila. The experiment included two treatments with different doses of a commercial liquid arbuscular mycorrhizal inoculant (Biofermex®), based on G. sp.: T1, with 5 cm³ L?¹ of water, and T2, with 10 cm³ L?¹ of water, as well as a non-inoculated control treatment (T0). Evaluations were conducted from 30 to 105 days after transplanting (DAT), assessing primary root length (PRL), number of secondary roots (NSR), stem diameter (SD), stem length (SL), total leaf area (TLA), and total dry mass (TDM). Statistical analysis was performed using analysis of variance (ANOVA) and graphical methods, whereas a technical and economic assessment was carried out to compare production costs during the nursery period. The results showed that T1 and T2 presented statistically significant increases in NSR (44.4 and 27.4%) and TLA (84.5 and 24.7%) compared with the control. In addition, the implementation of temporary nurseries with appropriate mycorrhizal management resulted in 36.34% higher profitability compared with the purchase of seedlings from external nurseries.
The following work evaluated the yield of the rice crop (Oryza sativa L.), using controlled release nitrogen fertilizer, the study area was two hectares. A simple factorial experimental design in randomised blocks was established, with four treatments with different percentages of fertiliser: T1(0%N); T2(50%N); T3(100%N); and T4(150%N), the percentages of nitrogen applications were carried out according to the indications of an agronomist, based on the Nitrogen losses from conventional fertilization reduce nitrogen use efficiency and limit productivity in irrigated rice systems. This study evaluated the effect of controlled-release urea with a urease inhibitor (NITROXTEND+S) on the yield of irrigated rice (Oryza sativa L.) in Huila, Colombia. The field trial (2 ha) was designed as a randomized complete block design with four nitrogen (N) treatments: T1 (0%), T2 (50%), T3 (100%), and T4 (150%). Five fertilization applications were carried out in 2023 (March 22, 29, April 1, 15, and 25), following the agronomist's technical recommendations based on soil chemical analysis and weekly crop monitoring. Phenological variables and yield (using 50 × 50 cm measuring devices) were evaluated, and Shapiro-Wilk, ANOVA, and Fisher's LSD tests were applied. The yield of green paddy rice (mean ± SE) was: T1 = 5.86 ± 0.12, T2 = 7.19 ± 0.25, T3 = 9.48 ± 0.19, T4 = 7.91 ± 0.15 t ha⁻¹; T3 exceeded the national and departmental averages. It is concluded that inadequate doses (below or above the crop's nutritional requirements) reduce production, and that the optimal use of controlled-release nitrogen with a urease inhibitor improves productivity and nutrient use efficiency.
The continuous use of agricultural machinery in rice (Oryza Sativa L.) cultivation throughout its vegetative cycle increase in apparent density and resistance to penetration into the soil, which affects the development of the crop and its performance. Thus, seeking a more sustainable agriculture, it was proposed to evaluate the soil's physical properties and crop yield, modifying the conventional preparation with a harrow using a chisel on the USCO’s Farm in Palermo (Huila, Colombia). Four experimental treatments were implemented: three with different chisel passes and a control with conventional plowing, in which real density, bulk density, and porosity were evaluated before and after tillage, and after harvest. The statistical analysis was carried out through analysis of variance, and the techno-economic analysis was carried out based on the production and operation costs between the two types of tillage. The results showed that after tillage, the bulk density decreased by 13.5% in the control and 11.5% in T3. These effects increased porosity between 23.0 and 31.6% in the area with greater tillage. After the harvest, a resilient response of the soil was found, which recovered 9.5 and 12.4% of the apparent density in T3 and T4, respectively. The use of reduced tillage with chisel did not make a significant difference in production (Control: 7.8 t ha-1, T1 and T2: 8.2 t ha-1, and T3: 8.4 t ha-1), but it was more economical and less aggressive for the soil in structural terms.