Two series of polyurethane (PU), based on polycaprolactone (PCL) as soft segments with two different molecular weights (2000 and 530 Da), and hexamethylene diisocyanate (HDI) and 1,4-butandiol (BDO) as hard segments were synthesized to fabricate curcumin-loaded electrospun nanofibrous PCL-based PU substrate. Chemical structures of the synthesized PUs were characterized by FTIR and NMR spectroscopy techniques. The thermal properties were analyzed by differential scanning calorimetry (DSC) and surface hydrophilicity was studied by static contact angle and bulk hydrophilicity was evaluated by water uptake test. Thereafter, bead-free PU nanofiberous substrate containing curcumin was fabricated by electrospinning and morphology of the mats was observed by scanning electron microscopy (SEM). Mechanical properties of the electrospun mats in comparison with polymeric films were assessed by a universal test machine. The in vitro release of curcumin was studied by UV–Vis spectroscopy. The optical density of the bacterial solutions was used to evaluate the antibacterial activity of the curcumin-loaded nanofibrous mats against Escherichia coli (E-coli ATCC: 25922). The results showed that curcumin-loaded PU synthesized by PCL with molecular weight of 2000 Da displayed better mechanical properties as well as better antibacterial properties in wound dressing application. Graphical abstract
The most applicable method to produce polylactic acid (PLA) is via ring opening polymerization of lactide, which involves three steps: polycondensation of low-molecular-weight PLA (LMW PLA), depolymerization or dimerization of a prepolymer into a cyclic dimer of lactic acid (lactide) and ring opening polymerization of lactide to achieve high-molecular-weight PLA. This work aimed to optimize the reaction conditions of lactide synthesis. Reactions at different temperatures and pressures were carried out in the presence of tin (II) oxide, tin (II) chloride, tin (II) octate, antimony trioxide, sulfuric acid and no catalyst in a semi-batch reactor. Different analytical techniques such as gas chromatography, gel permeation chromatography, differential scanning calorimetry, nuclear magnetic resonance and Fourier transform infrared spectroscopy have been used to evaluate the LMW PLA properties, rate of lactide synthesis and racemization. Results showed that the highest rate of conversion occurred in the presence of tin (II) chloride and octate. Synthesis rate increased with the increase in reaction temperature and the decrease in pressure. Increasing temperature also resulted in higher amounts of optical and chemical impurities in the crude lactide.
25 November 2020 in Polymers for Advanced Technologies