Steel studs are used in double walls to provide structural stability. This creates a vibration transmission path between leaves that can often be more critical than the airborne path through the cavity. Some of the existing models for sound transmission consider the studs as elastic springs. The spring stiff ness may be taken as the cross-section elastic stiff ness of the stud, but this leads to an underestimation of the vibration transmission. A procedure to obtain more accurate parameters to be used in vibration and sound insulation models is presented. The results show that they must be obtained from dynamic models and/or experiments.Peer ReviewedPostprint (author’s final draft

We prove that the solution of any linear mechanical system can be expressed as a linear combination of signal transmission paths. This is done in the framework of the Global Transfer Direct Transfer (GTDT) formulation for vibroacoustic problems. Transmission paths are expressed as powers of the transfer matrix. The key idea of the proof is to generalise the Neumann series of the transfer matrix --which is convergent only if its spectral radius is smaller than one-- into a modified Neumann series that is convergent regardless of the eigenvalues of the transfer matrix. The modification consists in choosing the appropriate combination coefficients for the powers of the transfer matrix in the series. A recursive formula for the computation of these factors is derived. The theoretical results are illustrated by means of numerical examples. Finally, we show that the generalised Neumann series can be understood as an acceleration (i.e. convergence speedup) of the Jacobi iterative method.Peer ReviewedPostprint (author's final draft