Environmental exposure to active pharmaceutical ingredients (APIs) can have negative effects on the health of ecosystems and humans. While numerous studies have monitored APIs in rivers, these employ different analytical methods, measure different APIs, and have ignored many of the countries of the world. This makes it difficult to quantify the scale of the problem from a global perspective. Furthermore, comparison of the existing data, generated for different studies/regions/continents, is challenging due to the vast differences between the analytical methodologies employed. Here, we present a global-scale study of API pollution in 258 of the world’s rivers, representing the environmental influence of 471.4 million people across 137 geographic regions. Samples were obtained from 1,052 locations in 104 countries (representing all continents and 36 countries not previously studied for API contamination) and analyzed for 61 APIs. Highest cumulative API concentrations were observed in sub-Saharan Africa, south Asia, and South America. The most contaminated sites were in low- to middle-income countries and were associated with areas with poor wastewater and waste management infrastructure and pharmaceutical manufacturing. The most frequently detected APIs were carbamazepine, metformin, and caffeine (a compound also arising from lifestyle use), which were detected at over half of the sites monitored. Concentrations of at least one API at 25.7% of the sampling sites were greater than concentrations considered safe for aquatic organisms, or which are of concern in terms of selection for antimicrobial resistance. Therefore, pharmaceutical pollution poses a global threat to environmental and human health, as well as to delivery of the United Nations Sustainable Development Goals.
New approaches to the characterization of porous materials must satisfy principles of green analytical chemistry; in addition, they should be reproducible, versatile, and capable of providing relevant information for specific applications. Membrane characterization techniques often fail to meet some of these requirements. Specifically, hydrodynamic porous-based model methods (HPMMs) enable the simulation and evaluation of membrane properties, as well as the monitoring of changes in the response to controlled and uncontrolled modifications. Nevertheless, HPMMs are limited by the multifactorial relationships between their variables and by the generation of only single-value responses. Here, a semi-empirical approach to the characterization of membrane pore structure is proposed and evaluated using simple experimental measurements from pristine and modified membranes. The model enables the determination of the effective pore radius based on two size descriptors related to porosity and permeability, the construction of pore size distributions, and the estimation of structural parameters, such as the number of pores, pore size, and surface porosity. Furthermore, it allows for the simulation of Darcy-type flow behavior in both linear and nonlinear regimes. The model was evaluated on pristine and poly(vinyl alcohol)-modified poly(ethersulfone) ultrafiltration membranes (60–120 mmolL−1) by diafiltration (100–400 kPa). Results demonstrate the usefulness of the model in characterizing membrane pore structure by using simple, fast, and non-destructive methods, thereby enabling advances in analytical diafiltration for membrane characterization.
Poly(glycidyl methacrylate) (PGMA) is a polymer containing epoxy groups in its side chains, which makes it a suitable platform for the development of functional materials. In this study, crosslinked PGMA-based microspheres were synthesized by suspension polymerization using N,N′-methylenebisacrylamide as a crosslinker, and the effect of incorporating inorganic additives (InAds) (NaCl, CaCO3, and MgO nanoparticles) during synthesis was evaluated. In all cases, solid microspheres were obtained, exhibiting variations in particle size, sphericity, and aggregation depending on the type and amount of InAds. Thermal stability was characteristic of crosslinked PGMA (i.e., a single broad thermal transition in ~80–110 °C), while water absorption remained within a narrow range (80–120% for t = 40 min). In addition, the number of epoxy groups per gram of sample was 4.83 ± 0.02 mmol g−1. Selected microspheres were subsequently functionalized with polyethyleneimine (PEI) to obtain graft polymers (PGMA–PEI) and evaluated for the adsorption of three model contaminants: Acid Red 27 (AR-27), nitrites, and acetaminophen. PGMA–PEI showed high affinity toward AR-27 and nitrites, achieving high removal efficiencies at acidic and neutral pH, with rapid adsorption kinetics consistent with a pseudo-second-order model, attributed to electrostatic interactions between protonated amine groups and anions. At pH 11, anion desorption was promoted, enabling partial material regeneration. The results highlight the potential of PGMA–PEI microspheres for the removal of AR-27 (maximum retention ~0.25 mg of dye/g of polymer) and nitrites (maximum retention ~0.023 mg of /g of polymer), whereas acetaminophen removal was not evidenced.
Las aplicaciones de plaguicidas en cultivos de maíz durante y posterior a su cosecha constituyen un serio riesgo para la salud y el medio ambiente si su prevalencia continúa durante su línea de consumo, por consiguiente, la determinación adecuada de los residuos de este tipo de sustancias es de gran interés para minimizar el impacto negativo de los plaguicidas en la salud y calidad de los productos agrícolas. El objetivo de este trabajo fue evaluar la metodología de extracción multiresidual QuEChERS (“Quick, Easy, Cheap, Effective, Rugged, Safe”) como alternativa económica y de fácil implementación para el análisis de nueve plaguicidas en maíz blanco harinoso (Zea mays). Se ensayaron dos variantes de este método, el método original no bufferado y la versión ofiial AOAC 2007.01 con buffer acetato; los análisis se llevaron a cabo por cromatografía de gases con detector de captura de electrones (GC-ECD). Se comparó el porcentaje de coextractivos, humedad en el extracto fial y se realizó una verifiación en términos de precisión, linealidad, exactitud, efecto matriz y sensibilidad. La implementación del método original permitió obtener extractos más limpios y porcentajes de recuperación más consistentes y apropiados (promedio general entre 71,4-111,6% con coefiientes de variación inferiores al 9,2%), linealidad (r>0,9892) y límites de detección y cuantifiación inferiores a los límites máximos de residuos establecidos por la Comisión Europea (entre 10 y 50 μg kg-1), lo que hace a este método una buena opción para cuantifiar rutinariamente la residualidad de los plaguicidas evaluados en la matriz de trabajo.
Cellulose (FCm) and polypropylene (PPm) fibrous microfiltration membranes with comparable dry-state porosities were compared in terms of wettability, hydration, effective porous structure, and pressure-driven water transport. FCm exhibited substantially greater water uptake than PPm. A parametric volume-balance analysis showed that the inferred hydrated porosity and model-dependent tortuosity of FCm were highly sensitive to the assumed allocation of retained water, preventing the assignment of unique hydrated-state structural values. FCm displayed an approximately Darcy-like pressure–flux response, whereas PPm exhibited nonlinear behavior over 8.5–33.8 kPa, consistent with a pre-Darcy regime. Condensed-tannin (TAM) incorporation was subsequently evaluated as a separate hydroalcoholic membrane-modification process. At a fixed contact time of 120 min and 8.0% (w/v) TAM, incorporation reached 9.90 ± 0.72% for FCm and 8.64 ± 1.64% for PPm. Gompertz analysis showed that operational stabilization depended on membrane type and TAM concentration; thus, 120 min did not represent a universal equilibrium condition. TAM incorporation also increased with temperature and exhibited substrate-dependent pH behavior. Spectroscopic and microscopic analyses supported the deposition of a polyphenolic phase, while aqueous washing revealed partial release of non-crosslinked TAM. Overall, comparable dry-state porosity did not imply equivalent aqueous hydraulic behavior, and TAM incorporation depended additionally on substrate chemistry and processing conditions.