The thermal analysis behavior of C6H6N3[ReO4] was studied by simultaneous thermal gravimetric analysis (TGA) and differential scanning calorimetry (DSC) up to 700 °C under argon. Such analysis afforded rhenium metal, which was characterized by powder X-ray diffraction (PXRD), scanning electron microscopy (SEM), and energy-dispersive X-ray (EDX) spectroscopy. XRD peak broadening due to crystallite size and lattice strain was analyzed by both Williamson–Hall (W–H) and Debye–Scherrer (D–S) methods. Efforts to isolate Re metal from the thermal treatment of benzotriazole (BTA = C6H5N3) with NH4ReO4 and Re2O7 under various atmospheres and temperatures are also reported. The results provide a significant insight into the chemistry of group VII transition metals, investigate the potential use of benzotriazole as a reducing agent for metal productions, and demonstrate a successful convenient method for rhenium metal production, which could be applied to other refractory metals.
Additive manufacturing (AM) offers opportunities to advance the design and function of ceramic tooling in high temperature actinide pyrochemistry. In technical ceramics such as alumina, conventional forming techniques often restrict design flexibility and can limit experimental progress. In this study, we investigate the use of vat photopolymerization (VP) with commercial resins to fabricate large-scale alumina crucibles, reaching dimensions up to 125 mm, which is significantly larger than typically reported for dense VP ceramics. Notably, these additively manufactured components are produced using consumer-grade hardware, which limits process control, but offers significant upside in scalability and accessibility. Using microscopy and X-ray computed tomography, the VP alumina parts have high bulk densities above 95%, but also the prevalence of AM-induced artifacts and surface defects. Mechanical testing showed these defects to significantly reduce flexural strength and compromise part reliability. Electrorefining trials under sustained exposure to molten salts and metals reveal mixed results, with the AM material exhibiting high chemical compatibility, but mechanical failures due to the reduced strength were prevalent. Our findings illustrate both the promise and current limitations of AM ceramics for actinide chemistry, and point toward future improvements in process optimization, design strategies, and part screening to enhance performance and reliability.
12 May 2025 in Journal of Vacuum Science & Technology A
Understanding plutonium’s interaction with metals is crucial for optimizing pyrochemical operations, nuclear fuel containment, and various actinide processing techniques. Traditionally, tantalum crucibles are employed for plutonium processing due to their high durability, excellent temperature stability, and low solubility in plutonium. However, tantalum faces challenges such as plutonium wetting and diffusion, making surface coatings particularly important for crucibles in pyrochemical applications to enhance corrosion resistance against plutonium. Tantalum is also expensive and difficult to machine, prompting the need for advanced manufacturing techniques to address these challenges. Here, we investigate the interaction of Pu with tantalum and titanium crucibles fabricated using both traditional machining methods and laser powder bed fusion (LPBF) additive manufacturing (AM). LPBF-AM is an advanced technique that allows for the creation of complex geometries from traditionally difficult-to-machine metals by using a high-powered laser to build parts. Previous studies of conventional manufactured tantalum have utilized oxidation and carburization of the surface to mitigate plutonium wetting; however, no studies of surface modified LPBF-AM material have been undertaken. These studies are crucial, given the typical differences in the grain structure between conventional and LPBF-AM materials. All crucibles underwent differential scanning calorimetry to confirm the melting of plutonium. Subsequently, the crucibles were sectioned and mounted in epoxy for microstructural analysis using optical microscopy and scanning electron microscopy. This investigation, comparing the performance of wrought vs AM metal crucibles, provides a basis for future tooling applications in actinide processing techniques and can address the challenges associated with traditional machining, particularly in pyrochemical applications.
Three molecular precursors (uranium amidinate, thioamidate, and amidate) were subjected to laser-based heating to assess how laser irradiation (T > 2000 °C and rapid cooling) changes uranium material formation compared to more mild conditions in furnace heating. Simultaneous thermal analysis was conducted to study mass loss and decomposition profile of the precursors under mild conditions, and suggests formation of uranium nitride, sulfide, and oxide materials. Under laser irradiation, residual gas analysis indicates more fragmentation of ligands with increasing laser power, with small gases such as N2, CO, and small hydrocarbons being the primary gaseous byproducts. Powder X-ray diffraction (PXRD) of the solid-state product formed from an amidinate precursor indicates formation of uranium carbide at lower laser powers, but uranium nitride at higher laser powers. PXRD for amidate and thioamidate precursors reveals nitride and carbides as major products. This suggests that the reactive environment created by the laser and gaseous byproducts is more influential than the pre-existing U–N, U–S, and U–O bonds, which are favored in furnace experiments. Overall, this study demonstrates the varied uses of these molecular precursors when subjected to differing thermal conditions, and their utility for the formation of uranium nitride and uranium carbide under laser irradiation.