Yongsheng Zhang

Prof. Dr. Yongsheng Zhang


Research Focus & Metrics

Academic Career Length

15Years (2012-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 February 2023 in Journal of Advanced Ceramics
Verified
Journal Article
Open access
PDF file
JLJicheng Li
Jicheng Li
YZYanchun Zhou
Yanchun Zhou
YSYunfeng Su
Yunfeng Su
SCShuna Chen
Shuna Chen
QSQiuan Sun
Qiuan Sun
YZYongsheng Zhang
Yongsheng Zhang
High-entropy carbides are a nascent group of ceramics that are promising for high-temperature applications due to the combination of good stability, high hardness (H), high strength, and superior creep resistance that they display. Due to high melting points and low lattice diffusion coefficients, however, the high-entropy carbides are usually difficult to consolidate to a nearly full density. To cope with this challenge, herein, binary carbides including TiC, V8C7, NbC, Mo2C, and WC with different carbon stoichiometry were used to prepare dense high-entropy (TiVNbMoW)C4.375, and the influence of carbon vacancy on formation ability and mechanical properties of carbon-deficient high-entropy (TiVNbMoW)C4.375 were investigated. Intriguingly, although the starting binary carbides have different crystal structures and carbon stoichiometry, the as-prepared high-entropy material showed a rock-salt structure with a relatively high density (98.1%) and good mechanical properties with hardness of 19.4±0.4 GPa and fracture toughness (KIC) of 4.02 MPa·m1/2. More importantly, the high-entropy (TiVNbMoW)C4.375 exhibited low coefficient of friction (COF) at room temperature (RT) and 800 ℃. Wear rate (W) gradually increased with the temperature rising, which were attributed to the formation of low-hardness oxidation films at high temperatures to aggravate wear. At 800 ℃, lubricating films formed from sufficient oxidation products of V2O5 and MoO3 effectively improved tribological behavior of the high-entropy (TiVNbMoW)C4.375. Wear mechanisms were mainly abrasive wear resulting from grain pullout and brittle fracture as well as oxidation wear generated from high-temperature reactions. These results are useful as valuable guidance and reference to the synthesis of high-entropy ceramics (HECs) for sliding parts under high-temperature serving conditions.

2 April 2024 in Friction
Verified
Journal Article
Open access
PDF file
HNHui Feng Ning
Hui Feng Ning
FCFaqiang Chen
Faqiang Chen
YSYunfeng Su
Yunfeng Su
HLHongbin Li
Hongbin Li
HFHengzhong Fan
Hengzhong Fan
LHLitian Hu
Litian Hu
The tribological properties of self-lubricating composites are influenced by many variables and complex mechanisms. Data-driven methods, including machine learning (ML) algorithms, can yield a better comprehensive understanding of complex problems under the influence of multiple parameters, typically for how tribological performances and material properties correlate. Correlation of friction coefficients and wear rates of copper/aluminum-graphite (Cu/Al-graphite) self-lubricating composites with their inherent material properties (composition, lubricant content, particle size, processing process, and interfacial bonding strength) and the variables related to the testing method (normal load, sliding speed, and sliding distance) were analyzed using traditional approaches, followed by modeling and prediction of tribological properties through five different ML algorithms, namely support vector machine (SVM), K-Nearest neighbor (KNN), random forest (RF), eXtreme gradient boosting (XGBoost), and least-squares boosting (LSBoost), based on the tribology experimental data. Results demonstrated that ML models could satisfactorily predict friction coefficient and wear rate from the material properties and testing method variables data. Herein, the LSBoost model based on the integrated learning algorithm presented the best prediction performance for friction coefficients and wear rates, with R2 of 0.9219 and 0.9243, respectively. Feature importance analysis also revealed that the content of graphite and the hardness of the matrix have the greatest influence on the friction coefficients, and the normal load, the content of graphite, and the hardness of the matrix influence the wear rates the most.

30 August 2017 in ACS Applied Materials & Interfaces
Verified
Journal Article
Closed access
YSYunfeng Su
Yunfeng Su
YZYongsheng Zhang
Yongsheng Zhang
JSJunjie Song
Junjie Song
LHLitian Hu
Litian Hu

24 January 2020 in Journal of the American Ceramic Society
Verified
Journal Article
Closed access
PDF file
SCShuna Chen
Shuna Chen
YSYunfeng Su
Yunfeng Su
JSJunjie Song
Junjie Song
HFHengzhong Fan
Hengzhong Fan
XJXiaofang Jiang
Xiaofang Jiang
YZYongsheng Zhang
Yongsheng Zhang

1 June 2025 in Journal of Advanced Ceramics
Verified
Journal Article
Open access
PDF file
JLJicheng Li
Jicheng Li
YSYunfeng Su
Yunfeng Su
SCShuna Chen
Shuna Chen
HFHengzhong Fan
Hengzhong Fan
XZXiande Zheng
Xiande Zheng
YZYongsheng Zhang
Yongsheng Zhang
Ceramic-based lubrication materials are among the best choices for solving high-temperature load-bearing and lubrication problems. However, traditional ceramics achieve self-lubrication by adding lubricating phases, which often leads to a significant degradation of mechanical properties, severely limiting their engineering applications. Benefiting from the excellent high-temperature mechanical and lubrication potential of the novel high-entropy borides, the present work innovatively proposed the strategy of using high-entropy ceramics' own components to provide lubrication functions and successfully designed and prepared a novel high-entropy (Ti0.2V0.2Nb0.2Ta0.2Mo0.2)B2 based on the tribological element design principles. The material achieves synergistic enhancement of both mechanical and tribological performances. Its microhardness, fracture toughness, and flexural strength are up to 23.8±0.9 GPa, 5.4±0.3 MPa·m1/2, and 415±17 MPa, respectively. Furthermore, compared with the conventional single-phase ceramics, the high-entropy (Ti0.2V0.2Nb0.2Ta0.2Mo0.2)B2 with Al2O3 balls as the mating partner demonstrates exceptional overall tribological properties across a wide temperature range. Notably, the friction coefficient is as low as 0.12±0.01 at 1000 ℃, while the wear rate maintains at a low level ((8.8±0.7)×10-5 mm3/Nm). This outstanding high-temperature tribological performance is primarily attributed to the novel high-temperature solid-liquid synergistic lubrication mechanism generated by liquid-phase B2O3 and solid-phase layered MoO3 and V2O5, as well as the excellent high-temperature support provided by the high-entropy (Ti0.2V0.2Nb0.2Ta0.2Mo0.2)B2 substrate.

23 October 2018 in Tribology Letters
Verified
Journal Article
Closed access
PDF file
XJXiaofang Jiang
Xiaofang Jiang
JSJunjie Song
Junjie Song
YSYunfeng Su
Yunfeng Su
YZYongsheng Zhang
Yongsheng Zhang
LHLitian Hu
Litian Hu