This paper presents an experimental study about the influence of interfacial properties on the performance of fiber-reinforced asphalt. In this study, four types of fiber including one fiber-reinforced plastic (FRP), two lignin fibers, and one basalt fiber are used, and also four types of asphalt: Asphalt No. 90, asphalt No. 70, one styrene-butadiene-styrene (SBS) modified asphalt, and asphalt rubber are used. The surface energy parameters of various asphalts and fibers and the shear strength of various fiber-reinforced asphalts are measured. On the basis of these measurements, the influences of surface properties of asphalt and fiber on the performance of fiber-reinforced asphalt are analyzed. The results show that the shear strength of asphalt binder can be significantly increased by adding fibers, and the reinforcement effect is closely related to the types of asphalt and fiber. It was discovered, for the same asphalt, that the basalt fiber has the best reinforcement effect, followed by the two lignin fibers, and the FRP. For the same fiber, asphalt rubber was the most reinforced, followed by the SBS modified asphalt, asphalt No. 70 and asphalt No. 90. It was also discovered, for the same asphalt, the higher the surface energy of the fiber, the better the fiber reinforcement effect. The analysis indicates a good correlation between the work of adhesion between asphalt and fiber and the effect of fiber reinforcement. The results can be used as a basis for the selection of the proper fiber-asphalt combination to improve fiber reinforcement effects.

In the past decades, a large amount of research was conducted to investigate the application prospect of microwave heating technology in improving the efficiency of asphalt pavement self-healing and de-icing. This paper reviewed the achievements in this area. Firstly, the properties of asphalt concrete after microwave heating were summarized, including microwave sensitivity and heating uniformity. Then, the evaluation indicators and influence factors of the self-healing properties of the asphalt mixtures heated by microwave were reviewed. Finally, the application of microwave heating in asphalt pavement de-icing was explored. In addition, asphalt pavement aging due to microwave heating was also reviewed. It was found that microwave heating technology has good prospects in promoting asphalt pavement self-healing and de-icing. There are also some problems that should be studied in depth, such as the cost-effectiveness of microwave-sensitive additives (MSAs), the performance of the pavement with MSAs, mechanism-based self-healing performance indicators, and the aging of asphalt pavements under cycling microwave heating.

Asphalt pavement is vulnerable to the temperature rising and extremely high-temperature weather caused by climate change. The regulation techniques of asphalt pavement high temperature have become a growing concern to adapt to climate change. This paper reviewed the state of the art on regulating asphalt pavement high temperature. Firstly, the influencing factors and potential regulation paths of asphalt pavement temperature were summarized. The regulation techniques were categorized into two categories. One is to regulate the heat transfer process, including enhancing reflection, increasing thermal resistance, and evaporation cooling. The other is to regulate through heat collection and transfer or conversion, including embedded heat exchange system, phase change asphalt pavement, and thermoelectric system. Then, the regulation techniques in the literature were reviewed one by one in terms of cooling effects and pavement performance. The issues that still need to be improved were also discussed. Finally, the regulation techniques were compared from the perspectives of theoretical cooling effects, construction convenience, and required maintenance. It can provide reference for understanding the development status of asphalt pavement high temperature regulation techniques and technique selection in practice.

This article presents the latest progress in research on tire–pavement contact behavior. Firstly, the tire–pavement contact characteristics and their influencing factors are summarized. Then, the measurement methods and theoretical research on tire–pavement contact behavior are reviewed, and the advantages and shortcomings of different methods are compared and analyzed. Finally, analysis in the field of pavement engineering is summarized based on contact behavior. This article suggests a few key research directions: Tire–pavement contact behavior is influenced by multiple factors; therefore, multi-physical field-coupling analyses need to be carried out. Tire–pavement contact tests are mostly static and non-standardized, and it is a future trend to develop high-precision, low-cost, and standardized instruments that can measure dynamic contact. Theoretical research models rarely involve environmental factors; a contact model of the tire, pavement, and environment needs to be constructed that can truly describe the contact process. There is a relationship between contact characteristics and pavement performance; pavement performance evaluation indexes need to be established based on tire–pavement contact characteristics in the future.

Bridge safety is important for the safety of vehicles and pedestrians. This paper presents a study on the development of a low-power wireless acceleration sensor and deployment of the sensors on a wireless gateway and cloud platform following the Internet of Things (IoT) protocols for bridge monitoring. The entire system was validated in a field test on the Chijing bridge in Shanghai. Field evaluations indicated that the developed IoT bridge monitoring system could achieve the functions of real-time data acquisition, transmission, storage and analytical processing to synthesize safety information of the bridge. The demonstrated system was promising as a complete, practical, readily available, low-cost IoT system for bridge health monitoring.

In the global warming context, understanding the impact of temperature rise on asphalt pavement is the basis for making adaptation strategies. An approach based on historical climate data and pavement performance models was employed to assess the potential impact of temperature rise on asphalt pavement in China. It is shown that permanent deformation is one sensitive aspect of asphalt pavement performance, which increased on average by 20.70% from 1992 to 2019. Another one is low-temperature cracking, which decreased by 20.99% from 1970 to 1997, but has remained almost unchanged since 1997. Global mean surface temperature anomalies of 1.5 °C and 2.0 °C will increase the permanent deformation of asphalt pavement by 18.63% and 36.71%, respectively, compared to 2019. Global warming is bringing serious challenges to the structure and material design of asphalt pavement due to the increasing service temperature range.