A composite gradient-index metasurface (C-GM) array for microwave power reception (MPR) operating at 5.8 GHz center frequency was introduced. The array is insensitive to the polarization of incident plane waves and possesses cosine gradient modulation characteristics, which can convert the incident plane waves into surface waves focused at the center of the array. The focused surface wave energy is then collected by an omnidirectional antenna and fed back to a single rectifier for radio frequency (RF) to direct current (DC) conversion, resulting in DC output. Simulation results show that the array can fully excite surface waves under different polarized plane wave excitations, and the omnidirectional antenna has good matching characteristics with the array, achieving an energy collection efficiency of 66.52%. The array was fabricated and measured, achieving an energy reception efficiency of 59.91% and an RF-DC conversion efficiency of 34.83%, which is consistent with the simulation results. The proposed C-GM array can capture higher electromagnetic power by simply increasing its size, without the need for additional rectifiers or complex matching networks, making it a flexible and efficient MPR solution for different application scenarios.

This paper demonstrates an inkjet-printed quasi metasurface(QMS) flexible harvester for microwave power transfer(MPT). The substrate and radiator are separately based on Polyimide and EGaIn(Eutectic gallium indium alloy, in which the mass fraction of Ga and In are 75.5% and 24.5%, respectively). Due to the high electromagnetic energy loss of flexible materials, the electric field distribution is improved by etching on the transmission structure, consequently, the energy loss of the material is reduced. The simulated results show that under vertical incidence at 5.8 GHz by trench etching operation, the absorption efficiency(AE) and harvesting efficiency(HE) are both increased from 93% and 65% to 99% and 82%, respectively. The measured results show that the maximum HE is up to 78%, more than 60% HE can be maintained under multi-angle incident waves and more than 70% HE can be maintained in different conformal cases.

In this paper, a broadband tunable absorber based on bulk Dirac semimetal (BDS) in the far-infrared regime is studied. By optimizing the Femi energy and geometric size, the structure can achieve absorption levels greater than 90% in the 8.11-13.94 THz range, with a total thickness of 5.1 µm. Further, the bandwidth of this proposed absorber can be dynamically controlled by changing the Femi energy of the BDS instead of geometry. Meanwhile, the polarization and oblique incident angles in the TE and TM electromagnetic waves are also investigated. Finally, a new symmetry model is adopted to analyze the absorption mechanism, which is the innovation of this paper. This research result may provide potential applications for all types of optical photovoltaic devices and tunable biological chemistry sensors.

Magnetic pulse welding is a high-speed welding technology, which is suitable for welding light metal materials. In the magnetic pulse welding system, the field shaper can increase the service life of the coil and contribute to concentrating the magnetic field in the welding area. Therefore, optimizing the structure of the field shaper can effectively improve the efficiency of the system. This paper analyzed the influence of cross-sectional shape and inner angle of the field shaper on the ability of concentrating magnetic field via COMSOL software. The structural strength of various field shapers was also analyzed in ABAQUS. Simulation results show that the inner edge of the field shaper directly affects the deformation and welding effect of the tube. So, a new shape of field shaper was proposed and the experimental results prove that the new field shaper has better performance than the conventional field shaper.