The Taranto Landslide Complex (TLC) is a large submarine landslide area located along the continental margin of the Puglia Region, in the Gulf of Taranto (North Ionian Sea), between 200 and 800 m water depth. Based on very high-resolution multibeam data, a morphological analysis was performed by measuring different physical and spatial parameters (i.e., surface, headwall height and length, slope in the source area, and blocks in the accumulation zone). In addition, we use nine high-resolution sub-bottom CHIRP profiles to reconstruct the stratigraphic architecture. The main results show five phases of Quaternary mass transport deposits (MTDs) in the study area. The oldest to the youngest are MTD1, with a volume of about 0.032 km3 and an area of about 4 km2; MTD2, which is the largest of the identified deposits, covering an area of ∼26 km2 and having an estimated volume of ∼0.35 km3; and MTD3 and MTD4, with volumes of about 0.033 km3 and 0.035 km3 and an area of 7 km2 and 5 km2, respectively. The final submarine landslide is represented by MTD5, which has a volume of 0.02 km3. The deposits are internally characterized by chaotic acoustic facies with reflectors with moderate amplitude and laterally continuous in time, showing likely erosive characteristics defined as “bounding surfaces”. The main transport direction of the MTDs is from north/northeast to south/southwest. This represents the trend of the continental slope, but there is also slope failure evidence coming from west/northwest to east/southeast (MTD5). The correlation between topographic and seismo-stratigraphic features allows the documentation of the characteristics, distributions, sources, and the triggering mechanisms of the Late Quaternary MTDs in the area. We suggest that still the unknown trigger mechanisms could be based on the performed analysis, related to the anomalously high sedimentation rates and/or sea level fluctuation.
Recent technological advances are leading numerous researchers and professional users to the adoption of photogrammetric products for a wide range of geoscientific applications. Especially, drone-based Structure-from-Motion (SfM) photogrammetry is often applied as a high-resolution topographic modelling technique with advantages in terms of time and cost when compared to traditional surveying approaches. The aim of this work, carried out within the GeoArchaeo Sites Project, is to investigate the adaptability of drone-based surveys, even with a targetless approach, and to estimate bathymetrical accuracies in shallow waters. The approach was applied on an underwater site to show the potential for the digitalization and monitoring of an archaeological coastal geosystem in central Italy. Specifically, this work has compared the photogrammetric surveying capability of two drones including a Phantom 4 RTK (‘P4RTK’) and a low-cost Mavic Mini 2 (‘MM2’) and an Olympus TG-6 (underwater camera) for a site submerged with a maximum depth of ∼1.6 m. The assessment of the drone SfM-based products was performed through area-based and point-wise comparisons. Specifically, the area-based were assessed through an underwater photogrammetric survey obtained by acquiring images by an operator snorkeling along a portion of the site of interest. The point-wise comparison was performed using data acquired with a Global Navigation Satellite System (GNSS). This study demonstrates that coupling SfM-photogrammetry and UAS-based surveys have potential to define submerged topography. In particular, the imagery acquired with the P4RTK survey can produce dense 3D models of the underwater surface with high resolution (about 0.02 m) and bathymetric measurements with a vertical accuracy ranging between 0.06 and 0.29 m for the area-based and point-wise analysis, respectively. Thus, the approach adopted and tested involving the use of a P4RTK has the potential to reduce constraints and limitations in terms of GCPs distribution and measurement. Also, with such an approach the need for qualified operators for underwater photogrammetric workflow can be avoided.
The Neapolitan Yellow Tuff caldera-forming eruption (ca. 15 kyr) is a large event that occurred at Phlegrean Fields during the Late Glacial–Holocene time span. The eruptive products represent a widespread isochronous marker that links the marine and terrestrial stratigraphic record of the central Mediterranean and Northern Europe sequences. In this research, we describe the stratigraphic signature of the NYT deposits in the Late Glacial–Holocene shelf sequence of the Gulf of Gaeta (northern Campania region, southern Tyrrhenian Sea) throughout the seismo-stratigraphic interpretation of a grid of high and very high-resolution Chirp seismic profiles. The seismo-stratigraphic data allowed to individuate in the Upper Pleistocene–Holocene stratigraphic architecture a continental shelf characterized by an offlap prograding succession followed by a very thick transgressive onlapping unit, and by an upper highstand unit mainly characterized by undulations probably linked to gas-prone sediment. The NYT reflector observed was parallel and with a high amplitude. It was continuously detected from the shelf to the slope within transgressive deposits. On the inner shelf, its continuity was interrupted by shallow gas pockets. The NYT depths ranges from 2 m b.s.f. on the slope to 38 m b.s.f. on the continental shelf. The NYT event appeared to have played a key role in controlling the stratigraphic architecture of the studied area during the last transgression, acting as a trigger for the formation of the aggradational sedimentary successions fed by pyroclastic and volcaniclastic deposits.