A full comprehension of milk fat crystallization is important for the structural development of dairy products such as butter, ice cream, and cheese. The influence of triacylglycerol (TAG) composition on the dynamic of milk fat crystallization and the nanostructure of the formed crystals was investigated using two chemically different types of milk fat, namely buffalo and cow milk fats (BMF; CMF). The TAG composition was determined using liquid chromatography and mass spectrophotometry (LCMS), whereas differential scanning calorimetry (DSC), small- and wide-angle X-ray scattering (SAXS and WAXS), and polarized light microscopy (PLM) were used to characterize the crystallization behavior of the two milk fats. A total of 37 TAG species were identified in both BMF and CMF, but in different proportions. In particular, BMF was found to have a higher amount of low-molecular-weight TAGs in comparison to CMF. This difference in chemical composition explains the different kinetics of polymorphic transformation in the two samples. Specifically, it clarifies the delay in the nucleation of the β′-polymorph in BMF in comparison to CMF. BMF also showed a higher nucleation rate due to its higher proportion of saturated TAGs and higher melting range. Finally, this work presents a novel interpretation of the mechanism of formation of the β-polymorph (53 Å), which has recently become the subject of a vivid debate in milk fat crystallization studies.
22 October 2019 in Current Research in Nutrition and Food Science Journal
Acrylamide, a carcinogenic and neurotoxic compound, is a public health concern in fried food products. This paper demonstrated, for the first time, the exposure assessment and risk characterization of acrylamide through consumption of deep fried fritters, a popular snack of Indonesian population which commonly sold as street food. Acrylamide concentration data were collected from selected monitoring data and laboratory simulated researches, while the consumption data covered 263 respondents (adult, age 16-40). Exposure assessment was conducted with probabilistic approach and followed by Margin of Exposure (MoE) calculation. Estimated mean, median (P50) and P95 acrylamide intake were 14.85, 4.10 and 76.06 µg/kg- bw/week, respectively. Thus, resulted in estimated 17.4% of population exceed the reported tolerable intake value (18.2 µg/kg-bw/week). MoE derived from average exposure was 75, indicating significant risk and need of risk management action. Possible mitigation of 70% acrylamide level reduction was simulated and MoE shifted towards 248. Although the MoE was increased, the value was still lower than 10,000 indicating a public health concern. The risk assessment study can be a valuable input for risk managers such as food safety authorities across Indonesia or neighboring countries consuming fried street foods.
31 January 2018 in IOP Conference Series: Earth and Environmental Science
Carrageenan is a hydrocolloid which able to improve the characteristic of dried powder. The purpose of this study was to produce and evaluate the characteristics of yoghurt powder which incorporated carrageenan as stabilizer and dried in a cabinet dryer. Carrageenan of 1 %, 2 % and 3 % (w/v) concentration were added to yoghurt prior to cabinet drying process. Physical properties of the yoghurt powder and the reconstituted one were evaluated. The best result was shown in carrageenan concentration of 2 % where it showed the highest bulk density (0.62 g/ml), and best particle size distribution (65.49 % in the range of 250-500 μm). Moisture and water activity (aw) were 8.02% and 0.37, respectively. The value is lower than what spoilage microorganisms require to grow (aw > 0.6) thus ensuring its long shelf life when combined with proper packaging. Reconstitution at 50°C showed that 2 % carrageenan resulted in a stable yoghurt product with no visible syneresis even after 3 hours. The proposed method shows promising application in the production of long shelf-life yoghurt powder production.
23 August 2018 in Jurnal Aplikasi Teknologi Pangan
Gabah Beras Merah (GBM) dan Beras Merah (BM) merupakan bahan pangan yang memiliki nilai gizi yang tinggi dan bermanfaat bagi kesehatan. Malting merupakan proses pengolahan serealia dan biji-bijian untuk meningkatkan nilai gizinya dengan tahapan perendaman, germinasi, kemudian pengeringan. Penelitian ini bertujuan untuk mengetahui karakteristik densitas kamba, kelarutan, kadar air, dextrose equivalent, dan aktivitas antioksidan pada tepung malt GBM dan malt BM dengan perlakuan malting pada lama germinasi yang berbeda. Perlakuan malting dilakukan pada lama germinasi 0, 24, 48, dan 72 jam. Data dianalisis menggunakan pola regresi. Hasil penelitian menunjukkan bahwa lama germinasi pada proses malting mempengaruhi karakteristik kimia dan fisik tepung malt GBM dan tepung malt BM dengan korelasi sangat kuat. Pembuatan tepung malt BM menghasilkan tepung dengan karakter fisik dan kimia yang lebih baik dibanding GBM. Waktu tahap germinasi proses malting utamanya pada BM masih dapat dioptimalkan sehingga karakteristiknya masih berpotensi untuk ditingkatkan. Kesimpulannya, lama germinasi dapat mempengaruhi karakteristik kimia dan fisik tepung malt, baik untuk GBM maupun BM.Physical and Chemical Properties of Rough Red Rice Malt and Red Rice Malt Flour with Malting Treatment in Different Germination TimeRough red rice and red rice have high nutritional value and beneficial to health. Malting is a method of processing cereals and grains to increase its nutritional value by soaking, germination, and drying. This study aims to know the characteristic of bulk density, solubility, moisture content, dextrose equivalent, and antioxidant activity of rough red rice malt flour and red rice malt flour with malting treatment in vaious germination times. The data were analyzed using regression pattern with the treatment of malting germination time 0, 24, 48, and 72 hours. Results indicated that the various time of malting germination influenced the chemical and physical properties of rough red rice malt flour and red rice malt flour with very strong correlation. Red rice malt flour had better physical and chemical characteristics than rough red rice malt flour. Germination time in malting process specially for red rice still could be optimized. As conclusion, time of germination affected to the chemical and physical properties of malt flour from rough red rice and red rice.•|•|•