The photothermoelectric (PTE) effect enables efficient harvesting of the energy of photogenerated hot carriers and is a promising choice for high-efficiency photoelectric energy conversion and photodetection. Recently, the PTE effect was reported in low-dimensional nanomaterials, suggesting the possibility of optimizing their energy conversion efficiency. Unfortunately, the PTE effect becomes extremely inefficient in low-dimensional nanomaterials, owing to intrinsic disadvantages, such as low optical absorption and immature fabrication methods. In this study, a giant PTE effect was observed in lightly doped p-type silicon nanoribbons caused by photogenerated hot carriers. The open-circuit photovoltage responsivity of the device was 3-4 orders of magnitude higher than those of previously reported PTE devices. The measured photovoltage responses fit very well with the proposed photothermoelectric multiphysics models. This research proposes an application of the PTE effect and a possible method for utilizing hot carriers in semiconductors to significantly improve their photoelectric conversion efficiency.
Interference usually occurs between two non‐orthogonally polarized light beams. Hence, metasurface enabled polarization multiplexing is generally conducted under two orthogonal polarization states to realize independent intensity and/or phase modulations. Herein, we show that polarization multiplexed metasurfaces can work under three non‐orthogonal polarization states to realize tri‐channel image displays with independent information encoding. Specifically, enabled by orientation degeneracy, each nanostructure of the metasurface operates with triple‐manipulations of light, i.e., two channels for independent intensity manipulation under π /4 and 3 π /8 linearly polarized (LP) light, respectively, and one channel for phase manipulation without polarization control. We experimentally demonstrate this concept by recording one continuous‐brightness polychromatic image and one binary‐brightness polychromatic image right at the metasurface plane, while a continuous‐brightness polychromatic image is reconstructed in the far field, corresponding to three independent channels, respectively. More interestingly, in another design strategy with separated image encoding of two wavelengths, up to six independent image‐display channels can be established and information delivery becomes safer by utilizing encryption algorithms. With the features of high information capacity and high security, the proposed meta‐devices can empower advanced research and applications in multi‐channel image displays, orbital angular momentum multiplexing communication, information encryption, anti‐counterfeiting, multifunctional integrated nano‐optoelectronics, etc.
Broadband long‐wavelength infrared (LWIR) optical absorbers have important applications in thermal emission and imaging, infrared camouflaging, and waste heat and biothermal energy utilization. However, the practical application of broadband LWIR optical absorbers requires low‐cost and facile fabrication of large‐area structures with limited thickness. This paper reports the design and fabrication of an ultrathin, broadband, omnidirectional, and polarization‐independent LWIR optical absorber composed of anodized aluminum oxide and highly doped Si using the gradient refractive index strategy. The average absorption of the broadband optical absorber is higher than 95% in the 8–15 μm wavelength range, and it has wide incident angle and polarization tolerances. More than 95% of the optical energy in the wavelength range from 8 to 13 μm was absorbed within a depth of 8 μm, making this absorber the thinnest broadband LWIR dielectric absorber so far. The absorption remained above 90% after annealing at 800 °C in air. The infrared camouflage of the proposed absorber was successfully demonstrated with a human body background. With the advantages of facile fabrication, low‐cost materials, restricted absorption thickness, and excellent thermal stability, the developed broadband LWIR optical absorber is very promising for the practical applications mentioned above.