Purpose: To develop a chemical method that makes porcine lens anterior capsule resemble human lens anterior capsule in tear force and perforating force. Setting: Beijing Tongren Hospital, Beijing, China. Design: Experimental study. Methods: Porcine eyes were divided into groups, and reagents (0.9% physiological saline, 0.1% sodium hypochlorite, 0.3% sodium hypochlorite, and 0.5% sodium hypochlorite) were injected into the anterior chamber, respectively, recorded as Groups A, B, C, and D, respectively. A senior physician collected each group of anterior capsules after performing continuous circular capsulorhexis and assessing the anterior capsule's tearing and perforation forces. An additional group, which consisted of human lens anterior capsules taken in the operating room from patients with cataract, recorded as Group E. A tensile system was used to measure each sample's tensile force. Results: A significant difference was found between Group A and any other group in maximum tensile force and average tensile force in both transverse and longitudinal directions. No significant difference was found between any 2 groups from Group B to Group E. According to the surgeon's assessment, the tear force characteristic of the porcine lens anterior capsule treated with 0.1%, 0.3%, and 0.5% sodium hypochlorite solution was similar to that of the human lens anterior capsule. Conclusions: Porcine lens capsule treated using this method can be used for training of new surgeons. The porcine lens anterior capsule treated with 0.5% sodium hypochlorite, which results showed most resembled human lens anterior capsule, can be used for robotic training.
14 February 2023 in Computer Methods in Biomechanics and Biomedical Engineering
An epiretinal membrane (ERM) is a fibrocellular proliferation on the inner surface of the retina causing blurred and distorted central vision. Surgery is the only effective method for ERM removal. This paper investigated the mechanical properties of ERM peeling using the finite element (FE) method. A FE model of ERM formation on the retina surface was constructed. The failure criterion was applied to the attachment pegs to represent the adhesive force between the ERM and retina. The simulation results were consistent with the experimental data in published research. The maximum peeling force was 4.1 mN at a peeling velocity of 2 mm/s and an angle of 30°. The peeling force was minimum at the peeling angle of 45° and increased with the increase in peeling velocity and Young’s modulus of the membrane. The outcome of this paper can improve the safety and efficiency of ERM removal.