In this paper, electromagnetic shielding effectiveness of woven fabrics with high electrical conductivity is investigated. Electromagnetic interference-shielding woven-textile composite materials were developed from a highly electrically conductive blend of polyester and the coated yarns of Au on a polyamide base. A complete analytical model of the electromagnetic shielding effectiveness of the materials with apertures is derived in detail, including foil, material with one aperture, and material with multiple apertures (fabrics). The derived analytical model is compared for fabrics with measurement of real samples. The key finding of the research is that the presented analytical model expands the shielding theory and is valid for woven fabrics manufactured from mixed and coated yarns with a value of electrical conductivity equal to and/or higher than σ = 244 S/m and an excellent electromagnetic shielding effectiveness value of 25–50 dB at 0.03–1.5 GHz, which makes it a promising candidate for application in electromagnetic interference (EMI) shielding.
This paper presents developed detection rules for LLRP (Low Level Reader Protocol) interface, implementation of IDS (Intrusion Detection System) and IPS (Intrusion Prevention System) solution for UHF (Ultra High Frequency) RFID (Radio Frequency Identification) reader using Raspberry Pi 3. Developed security solution is used for securing current RFID readers supporting LLRP. The paper also deals with a comparison of IPS/IDS solutions and subsequently selection of the appropriate one for the implementation using Raspberry Pi. Main contribution is the securing of RFID readers which are usually available without any encryption support on the market. The functionality is tested with software metasploit framework.
The negative influence of non-ionizing electromagnetic radiation on organisms, including humans, has been discussed widely in recent years. This paper deals with the methodology of examining possible harmful effects of mobile phone radiation, focusing on in vivo and in vitro laboratory methods of investigation and evaluation and their main problems and difficulties. Basic experimental parameters are summarized and discussed, and recent large studies are also mentioned. For the laboratory experiments, accurate setting and description of dosimetry are essential; therefore, we give recommendations for the technical parameters of the experiments, especially for a well-defined source of radiation by Software Defined Radio.
24 November 2017 in Advances in Electrical and Electronic Engineering
This paper focuses on a survey of secure firmware update in the Internet of Things, design and description of safe and secure bootloader implementation on RFID UHF reader, encryption with AES-CCM and versioning with use of external backup flash memory device. In the case of problems with HW compatibility or other unexpected errors with new FW version, it is possible to downgrade to previous FW image, including the factory image. Authentication is provided by the UHF RFID service tag used to extract unique initialization vector of the encryption algorithm for each update session. The results show slower update speed with this new upgrade method of approximately 27% compared to older one, using the only AES-CBC algorithm.
This paper investigates influence of femtocells to the traditional mobile network hierarchy and their features. This upcoming technology is supposed to be widely deployed in the upcoming wireless and mobile networks. These small base stations are designed to improve indoors capacity, reducing macro cell traffic or to provide services in locations without signal or with weak coverage. The paper discusses usage of femtocell and related challenges, such as interferences, frequency spectrum planning, handovers or integration of femtocells into mobile networks.