Precise tailoring of the surface texture and composition of porous carbon materials is crucial for enhancing the energy storage performance of the supercapacitors. Here, we report the fabrication of high-surface-area, self-nitrogen-oxygen-doped porous carbon materials from the sustainable carbon source, Areca catechu nut, by controlling the carbonization temperature (800 to 1000 °C) using alkali (KOH) as an activator in an inert nitrogen atmosphere. The material characterizations revealed ultra-high surface area of the carbon materials (2,337 m2 g−1), with hierarchical micro- and mesoporosity and heteroatom retention (N, O). Activation significantly enhanced the surface textural properties, increasing the specific surface area and pore volumes from 57 to 2,337 m2 g−1 and from 0.14 to 2.59 cm3 g−1, respectively. The electrochemical performance of the prepared carbon materials was then studied in a 3-electrode cell configuration in an aqueous electrolyte (1 M H2SO4). The optimal sample, ANC_K1000, achieved a very high gravimetric capacitance of 410 F g−1 at a current density of 1 A g−1. The symmetric supercapacitor cell constructed with the optimal material delivered a decent energy density of 10.3 Wh kg−1 at the power density of 600 W kg−1, coupled with a capacity retention of 90.6% after 10,000 charge-discharge cycles. These results demonstrate a simple, facile, and sustainable method for fabricating biomass-derived porous carbon materials from A. catechu nuts, which show immense potential as electrode materials for efficient energy storage in supercapacitors.
This study reports the synthesis of an activated nanoporous carbon material from Phyllanthus emblica (Amala)—a biomass material which is an eco-friendly, economical, and sustainable precursor used to prepare activated carbon using zinc chloride (ZnCl2) activation at various temperatures (500–700 °C) under a nitrogen gas atmosphere. A sample that was carbonized at 700 °C (AmC_Z700) attained a high specific surface area of 1436 m2 g−1 and a total pore volume of 0.962 cm3 g−1, and, when used in an electrode, showed excellent supercapacitance performance, attaining a high specific capacitance of 263 F g−1 at a current density of 1 A g−1, followed by 55% capacitance retention at 50 A g−1. Additionally, the assembled symmetric supercapacitor cell, when operated at 1.2 V, delivered an energy density of 8.9 Wh kg−1 at a power density of 300 W kg−1 and exhibited an excellent cycle life of 95% after 10,000 successive charge/discharge cycles, demonstrating the substantial potential of Phyllanthus emblica seed-derived carbon materials for the creation of high-performance supercapacitors.