Self‐leveling mortar (SLM) has several advantages when compared to the conventional mortar used in subfloors, especially when productivity is desired. In Brazil, the use of SLM is not still widespread related to conventional mortar. Few builders are using it in constructions. In the same way, the sustainable reuse of wastes in building materials is not so great, but it has grown, becoming increasingly important. In Brazil, a great amount of waste is generated by the manufacture of electrical porcelain insulators and red ceramic. These materials are formed mainly by amorphous silicates and aluminosilicates, which when added as cement replacement can generate pozzolanic reactions. The present study evaluated the feasibility of using such wastes to replace cement to make SLM. Mortars were studied in the fresh state (fluidity, segregation and/or bleeding, outflow rate, outflow time, and kinetics of temperature) and in the hardened state (compressive strength, flexural tensile strength, capillary water absorption, water penetration height, and air permeability). According to the results, the cement replacement by porcelain or ceramic in SLM diminishes the flow and increases the setting time. The compressive strength is higher than the minimum related to literature, and the low values of water absorption and permeability were reached with porcelain waste.
24 September 2022 in Journal of Building Engineering
Management of human resources is an efficient method for improving the productivity of operational workers. Improving productivity of workers, companies may increase their market share, become more competitive and, consequently, increase their profitability. Thus, this study aims to identify the main needs of construction workers in São Paulo city, Brazil. For this it was applied a questionnaire based on Maslow’s Theory of Motivation – Hierarchy Needs. The questionnaire was applied to thirty-one (31) operational workers in one construction site in São Paulo city, Brazil. Results have shown that security, collaboration, consideration by work realized and greater respect from superiors (bosses) are the main requirements of these workers.
16 August 2022 in Interação - Revista de Ensino, Pesquisa e Extensão
A readequação/retrofit do layout interno de edificações pode ser realizada para modificação de uso, modernização de edificações e/ou para atender às exigências normativas atuais. Quando isso ocorre, é importante que seja feita uma análise estrutural da edificação visando verificar se esta possui capacidade de resistir aos carregamentos do novo uso, verificando se as novas cargas são compatíveis com a estrutura existente. Assim, o presente trabalho tem o objetivo de analisar os impactos da modificação do uso em uma edificação fictícia, considerando a modificação de uso residencial para o uso como uma escola. Para isso, foram realizados dois modelos estruturais (um para cada uso) e realizadas comparações por meio das diferenças percentuais entre as armaduras dimensionadas para os elementos estruturais da edificação. Os resultados mostraram que a modificação de uso ocasionou alterações dos esforços internos solicitantes e, consequentemente, na quantidade de aço necessária das lajes, vigas e pilares da edificação. As maiores alterações de quantidade de armadura foram verificadas nas lajes e vigas, que ocorreu em até, respectivamente, 72,7% e 50,0%; essas alterações não foram tão significativas nos pilares, cujas armaduras aumentaram em até 25,0%. Dessa forma, observou-se quantitativamente a necessidade da realização de uma análise estrutural de edificações quando estas são submetidas a modificação do uso devido aos novos carregamentos que podem ocorrer quando sua utilização é modificada.