Additive fabrication with wire arc shown tremendous advancements in recent years. The current study investigates the effect of welding conditions on the width of an additively produced layer by using Gas Metal Arc Welding - Cold Metal Transfer welding. Further, the Taguchi method was used to optimize the effect of weld settings on layer width which was additively deposited. The wire spool is made of Aluminium 6061, which has a wide range of industrial applications. Flaws, porosity, waviness,and weld bead's discontinuity on a surface could be minimized by the assortment and optimization of parameters or else, strange forms would emerge during creation of slender wall construction utilising Wire Arc Additive manufacturing. In Taguchi, an L9 Orthogonal array was utilised to investigate the input parameters namely wire feed speed, weld speed and voltage. The main plots identify the best parameter combination, while the analysis of variance determines the significant parameters. For the response variable, a linear regression approach is used to create a numerical model. The minimum width of bead of 2.39 mm is achieved at weld velocity of 0.9 m/min with wire feed speed of 6 m/min and at voltage of 12 V. The maximum width of the bead was 6.40 mm, achieved at weld velocity of 0.6 m/min with wire feed speed of 8 m/min at a voltage of 16 V. After optimising the parameters, confirmation tests are run, and the outcomes are compared to the initial outcome.
1 April 2025 in Journal of Materials Engineering and Performance
As a transformative technology, additive manufacturing has become essential for fabricating complex and customized components. Leveraging Metal Inert Gas welding, as an emerging layer-by-layer fabrication method, Wire Arc Additive Manufacturing (WAAM) Method de- livers significant advantages in material utilization, build rate, and cost-efficient method for fabricating full-scale components. This technique was evaluated on Aluminium 6061 mate- rial, renowned for its extensive industrial applications in constructing large structures. Given the importance of bead deposition Single-bead depositions were carried out by adopting the WAAM process for subsequent analysis. An in-depth statistical evaluation of the input pa- rameters affecting bead geometry was performed, resulting in the formulation of regression models for accurate prediction. An Artificial Neural Network(ANN) based predictive system was utilized to estimate geometric features, with the results verified through experimental observations. A multi-objective optimization approach was employed for identifying the most suitable configuration of process specifications required to obtain the preferred bead geometry. Multi-layer walls produced through a single-pass process of Aluminium 6061 were successfully produced through the WAAM process, utilizing the optimized specifica- tions. Validation revealed a refined microstructure of excellent quality, free from porosity and cracks.