Power metal-oxide-semiconductor field-effect transistors (MOSFETs) provide numerous advantages and are widely utilized in various power circuits. The junction temperature plays a critical role in determining the reliability, performance, and operational lifetime of power MOSFETs. Therefore, accurate monitoring of the junction temperature of power MOSFETs is essential to ensure the safe operation of power circuit systems. In bridge or motor drive circuits, MOSFETs often operate in a freewheeling state via the body diode, where the freewheeling current is typically variable. The proposed method for junction temperature measurement utilizes the body diode and is designed to accommodate varying forward currents. It also accounts for the temperature-dependent ideality factor to improve measurement accuracy. By integrating the forward voltage and forward current of the body diode, this approach reduces the required sampling frequency. To validate the method’s effectiveness, three representative types of power MOSFETs, a Si MOSFET (IRF520), a SiC MOSFET (C2M0080120D), and an aerospace-grade radiation-hardened MOSFET (RSCS25045T1RH), were used to measure junction temperatures before and after irradiation. Following ideality factor correction, the maximum absolute error compared to reference measurements from thermocouples and a thermal imager remained within 2 K across the temperature range of 300 K to 420 K. Experimental results confirm the feasibility of the proposed method.
1 May 2025 in JOURNAL OF SHENZHEN UNIVERSITY SCIENCE AND ENGINEERING
In large-scale antenna array millimeter-wave communication systems, the channel state information exhibits rapid variability in motion. Traditional channel estimation methods cannot react to the changes in real time. A time-angle domain joint sparse channel prediction method is proposed, which utilizes the signal characteristics of different representation domains of the large-scale antenna array channel. The method jointly analyzes the dual sparse characteristics of the channel's angle domain and time domain. By modeling the angular distribution of the channel, the sparse characteristics in the angle domain are effectively utilized. Through the analysis of the channel's time domain multipath information, the sparse characteristics of time domain delays are efficiently utilized. The classic orthogonal matching pursuit algorithm is employed for joint sparse reconstruction of the channel's angle and time domains, with iterative optimization during the channel prediction process. The simulation experiments construct millimeter-wave multipath channels based on the 3rd generation partnership project (3GPP) channel model, conducting comparative analyses on the proposed channel prediction method in terms of accuracy and performance metrics including precoding bit error rate (BER). Experimental results show that, compared with traditional single-domain channel prediction methods, the time-angle domain joint prediction method significantly improves the accuracy and stability of channel prediction. The research findings are of significant importance for adaptive transmission and beamforming in large-scale antenna array systems.