We report a morphological transition in the magnetic domain pattern exhibited by perpendicular anisotropy ferromagnetic multilayer films at room temperature and remanence. We found that the remanent magnetic domain morphology and the associated domain density, defined as the number of domains of a given magnetization direction per area, strongly depend on the magnetic history. When the magnitude of the previously applied external field approaches a specific value, typically 75–95% of the saturation field, the magnetic pattern, which generally forms a maze of interconnected stripe domains, decays into a shorter stripe pattern, and the domain density increases. We mapped out this morphological transition as a function of the previously applied field magnitude as well as the Co thickness. We found that a Co thickness close to 30 Å yields the highest domain density with the formation of a pure bubble domain state. Three-dimensional micromagnetic simulations confirm the formation of a pure bubble state in that parameter region and allow an estimation of the perpendicular anisotropy (here for an input magnetization of 1080 kA/m), as well as the interpretation of distinct features of the samples’ hysteresis loop based on the corresponding domain pattern.
6 June 2014 in Journal of Physics: Conference Series
The magnetic behaviour of 5 to 11 nm magnetite (Fe 3 O 4) nanoparticles (NPs) was measured at various temperatures (Ts) from 20 to 400 K. The particles were fabricated via thermal decomposition of an iron precursor, and involved a coating of the particles with oleic acid. The particle size distribution was analysed by XRD measurements and TEM imaging. Magnetization loops, measured at various Ts, indicate a superparamagnetic behaviour at high T and the occurrence of hysteresis at low T, with a stronger coercivity for the larger particles. Zero-Field-Cooling (ZFC) and Field Cooling (FC) curves indicate a superparamagnetic behaviour, with a blocking temperature varying significantly with the particle size. Namely, the peak temperature, T max , increases from 30 K to 170 K when the particle size increases from 5 nm to 11nm. Magnetic couplings between particles appear stronger for larger particles.
The advance of magnetic nanotechnologies relies on detailed understanding of nanoscale magnetic mechanisms in materials. Magnetic domain memory (MDM), that is, the tendency for magnetic domains to repeat the same pattern during field cycling, is important for magnetic recording technologies. Here we demonstrate MDM in [Co/Pd]/IrMn films, using coherent X-ray scattering. Under illumination, the magnetic domains in [Co/Pd] produce a speckle pattern, a unique fingerprint of their nanoscale configuration. We measure MDM by cross-correlating speckle patterns throughout magnetization processes. When cooled below its blocking temperature, the film exhibits up to 100% MDM, induced by exchange-coupling with the underlying IrMn layer. The degree of MDM drastically depends on cooling conditions. If the film is cooled under moderate fields, MDM is high throughout the entire magnetization loop. If the film is cooled under nearly saturating field, MDM vanishes, except at nucleation and saturation. Our findings show how to fully control the occurrence of MDM by field cooling.
The magnetic properties of nanoparticle assemblies have been investigated in detail through a combination of vibrating sample magnetometry (VSM) and muon spin relaxation () techniques. Two samples with average particle sizes of 5 and 20 nm, respectively, were studied. For both samples, the VSM and results exhibit clear signatures of superparamagnetism at high temperature and magnetic blocking at low temperature. The data demonstrate that the transition from the superparamagnetic to the blocked state occurs gradually throughout the sample volume over an extended temperature range due to the finite particle size distribution of each nanoparticle batch. The transition occurs between approximately 3 and 45 K for the 5-nm nanoparticles and 150 and 300 K for the 20-nm nanoparticles. The VSM and data are further analyzed to yield estimates of microscopic magnetic parameters including the nanoparticle spin-flip activation energy , magnetic anisotropy , and intrinsic nanoparticle spin reversal attempt time . These results highlight the complementary information about magnetic nanoparticles that can be obtained by bulk magnetic probes such as magnetometry and local magnetic probes such as .
Understanding the correlations between magnetic nanoparticles is important for nanotechnologies, such as high-density magnetic recording and biomedical applications, where functionalized magnetic particles are used as contrast agents and for drug delivery. The ability to control the magnetic state of individual particles depends on the good knowledge of the magnetic correlations between particles when assembled. Inaccessible via standard magnetometry techniques, nanoscale magnetic ordering in self-assemblies of Fe3O4 nanoparticles is here unveiled via X-ray resonant magnetic scattering (XRMS). Measured throughout the magnetization process, the XRMS signal reveals size-dependent inter-particle magnetic correlations. Smaller (5 nm) particles show little magnetic correlations, even when packed close together, yielding to magnetic disorder in the absence of an external field, i.e., superparamagnetism. In contrast, larger (11 nm) particles tend to be more strongly correlated, yielding a mix of magnetic orders including ferromagnetic and anti-ferromagnetic orders. These magnetic correlations are present even when the particles are sparsely distributed.
We show the possibility of creating magnetic domain memory in thin ferromagnetic films by inducing spatially varying exchange coupling interactions. We evidence this phenomenon in a perpendicular exchange bias film made of [Co/Pd] IrMn multilayers. Our coherent x-ray magnetic scattering speckle correlation study shows that the film exhibits no memory at room temperature but acquires a very high degree of magnetic memory, above 80% with subsequent field cycling when the sample is zero-field cooled below the blocking temperature of the IrMn layers .