Titanium alloys are widely employed for biomedical implants due to their high strength, biocompatibility, and corrosion resistance, yet their lack of intrinsic antibacterial activity remains a major limitation. Incorporating copper, an antibacterial and β-stabilising element, offers a promising strategy to enhance implant performance. This study investigates Ti-6Al-7Nb modified with 1–9 wt.% Cu via in situ alloying during metal-based laser powder bed fusion (PBF-LB/M), with the aim of assessing processability, microstructural evolution, and mechanical properties. Highly dense samples (>99.9%) were produced across all Cu levels, though chemical homogeneity strongly depended on processing parameters. Increasing Cu content promoted β-phase stabilisation, Ti₂Cu precipitation, and pronounced grain refinement. Hardness and yield strength increased nearly linearly with Cu addition, while ductility decreased sharply at ≥5 wt.% Cu due to intermetallic formation, hot cracking, and brittle fracture. These results illustrate both the opportunities and constraints of rapid alloy screening via PBF-LB/M. Overall, moderate Cu additions of 1–3 wt.% provide the most favourable balance between mechanical performance, manufacturability, and potential antibacterial functionality. These findings provide a clear guideline for the design of Cu-functionalised titanium implants and demonstrate the efficiency of in situ alloy screening for accelerated materials development.

Titanium alloys are widely employed for biomedical implants due to their favourable combination of strength, corrosion resistance, and biocompatibility. A drawback, however, is the lack of intrinsic antibacterial functionality. In this study, Ti 6Al 7Nb was modified with varying copper (Cu) contents (1 wt.% – 9 wt.%) via in situ alloying during metal based laser powder bed fusion (PBF-LB/M) to investigate the processing behaviour, microstructural evolution, and mechanical properties. Powder mixtures were processed under systematically varied laser parameters, with densification, surface quality, and microstructure assessed by microscopy and X-ray diffraction, while hardness and tensile properties were characterised through mechanical testing. The results demonstrate that dense samples (> 99.9 %) can be achieved for all investigated copper amounts, although the homogeneity is strongly dependent on the process parameters. An increasing copper content promotes β-phase stabilisation, Ti₂Cu precipitation, and significant grain refinement with a transition from columnar to equiaxed structures. Hardness and yield strength increase nearly linearly with increasing copper content, while the ductility decreases sharply at ≥ 5 wt.% Cu due to intermetallic formation, hot cracking, and brittle fracture mechanisms. These findings highlight both the potential and the limitations of copper additions in Ti 6Al 7Nb processed by PBF LB/M. Overall, moderate additions of 1 wt.% – 3 wt.% Cu appear most promising, offering improved mechanical performance while preserving sufficient ductility and manufacturability for biomedical applications.