A simulation model based on parallel systems is established, aiming to explore the relation between the number of submissions and the overall standard of academic journals within a similar discipline under peer review. The model can effectively simulate the submission, review and acceptance behaviors of academic journals, in a distributed manner. According to the simulation experiments, it could possibly happen that the overall standard of academic journals may deteriorate due to excessive submissions.
22 November 2016 in IEEE/ASME Transactions on Mechatronics
This paper proposes an analytical approach to directly determine coil thickness dimension only according to the magnetic pole pitch of magnetic levitation planar motors. Based on modeling of the electromagnetic forces/torques of magnetically levitated planar motors, three normalization functions about coil thickness, which are named the main forces/torques impact factor function, the y -axis attaching torque impact factor function, and the ratio factor function of the main forces/torques to coil mass, respectively, are abstracted and derived. These three normalized functions all are dimensionless and single value functions of coil thickness when magnetic pole pitch is specified. Taking the physical meanings of these three functions into account simultaneously and comparing the varying trends of these three functions synchronously, a narrower value range of coil thickness, which is between 0.318 times and 0.525 times of the magnetic pole pitch, is determined. By this approach, the coil thickness of magnetically levitated planar motors with Halbach permanent magnet array can be determined directly, instead of determining by numerical optimization usually including a few optimization parameters. This approach still allows coil thickness dimension to be fine-tuned to meet other design requirements of magnetic levitation planar motors.
This paper focuses on augmenting the propulsion via commutation of coil array for the long-stroke magnetically levitated stage with moving coils, whose mechatronics structure have been defined. The used commutation of coil array is based on the analytical force/torque-decomposing model of the stage and it is characterized by bounding the coil currents. Through this current-bounded commutation, the 1-norm of commutated coil current vector is increased so that the propulsion can be augmented, and simultaneously the infinite norm of commutated coil current vector is limited so that the amplitudes of commutated coil currents are not beyond the capacity of selected coil power amplifiers. By the investigation example of a long-stroke magnetically levitated stage with moving coils, it is theoretically verified that the propulsion (acceleration) can be augmented by 125% as well as the commutated coil currents can be kept within the capacity of selected coil power amplifiers, 3 A. The study results indicate that the propulsion of a magnetically levitated stage can be augmented via current-bounded commutation of coil array rather than via reconfiguring the mechatronics structure of stage or reselecting coil power amplifiers of larger capacity.
7 June 2012 in Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering
The research in the present paper focuses on decoupling the six-degrees-of-freedom motions of a magnetically levitated stage with moving coils and controlling the levitation motion. The decoupling is based on commutation of coil array, which is obtained reversely from the electromagnetic force/torque model of the stage. The control of levitation motion is carried out by a phase lead-lag controller designed on the criterion of minimum integral of time-weighted absolute error after gravity compensation modeling of the plant dynamics. Comprehensive simulations of the control system in MATLAB/Simulink and real levitation experiments on a digital signal processor-centered test platform are made to verify the six-degrees-of-freedom decoupling effect and the closed-loop control performances of the levitation degree of freedom. The results indicate that the six-degrees-of-freedom motions of the stage can be decoupled through coil array commutation and the levitation motion can be controlled by the phase lead-lag controller based on the gravity compensation model and designed on the criterion of minimum integral of time-weighted absolute error.
This paper proposes an approach to design the length, width, and bundlewidth dimensions of rectangular ironless coils for magnetically levitated planar motors. Firstly, a model for the propulsion and levitation forces generated from a single coil in Halbach permanent magnetic field by using Lorenz force volume integral method is developed. Then, a dimensionless factor named coil width dependent factor, Kc, which can define the amplitudes of propulsion and levitation forces, is formulated. In order to maximize the value of Kc, the optimal coils number, n, of a square forcer is derived to be m/2+1, where m is the multiples of coil length Lc to magnetic pole pitch τ. Thereafter, the coil width Wc and bundlewidth Bc are determined considering the given magnetic pole pitch τ. The comparison between the proposed approach and other formulations verifies that if such designed coils is utilized in a forcer, the average amplitude and the quadratic sum of all coil currents are both minimal when the forcer is desired to generate the identical driving forces. The proposed approach can be used to design the dimensions of a single coil and also to configure the high power density forcers or coil arrays for magnetically levitated planar motors.
This paper proposes a convex quadratic optimization commutation method to raise the equalization degree of power loss distribution of coil array for magnetic levitation planar motors. Starting with the modeling of electromagnetic forces/torques and commutation of coil array, the global power loss and the local power losses of coil array are analyzed, and the power loss equalizing degree is defined to evaluate the power loss distribution of coil array being commutated dynamically. Then, in consideration of the fact that the global power loss is the quadratic function of commutated coil currents, the convex quadratic function optimization with equality constraint and boundary constraints is applied to commutate the coil array, and the power loss equalizing degree is raised by decreasing the boundary constraints of optimization. Taking the magnetically levitated planar motor under investigation as examples and using quadprog routine in Matlab Optimization Toolbox, which is a dedicated quadratic optimization routine, it is verified that the power loss equalizing the degree of coil array is raised gradually and the power loss distribution of coil array becomes more uniform along with decrease of the boundary constraints. The convex quadratic optimization commutation is verified experimentally on a constructed multi-dimension force/torque measurement platform. Using the convex quadratic optimization commutation can not only improve the power loss distribution of coil array of magnetically levitated planar motors, but also make it possible to select lower capacity power amplifiers to produce the identical desired electromagnetic forces and torques.