This work presents a combination of Computational Fluid Dynamics (CFD) and Adaptive Network-based Fuzzy Inference System (ANFIS) developed for flow characterization inside a cylindrical bubble column reactor. An attempt has been made to predict the liquid flow pattern and gas dynamics for various ring sparger diameters (i.e., 0.07–0.16 m) and bubble column heights. Gas hold-up, Turbulent Kinetic Energy (TKE) and axial liquid velocity are the output parameters predicted by using the ANFIS method with respect to sparger diameter, axial coordination and radial coordination. Various architectures of the ANFIS method were constructed in order to achieve an accurate prediction model of the liquid flow behavior and gas dynamics inside the bubble column. ANFIS approaches were trained and tested by using CFD simulation results. The performance of the ANFIS approaches was examined by comparing the root mean square error and correlation coefficient values of the prediction models. The CFD simulation results are validated with existing experimental and numerical data and mathematical correlations. Both CFD simulation and ANFIS prediction results show that ring sparger diameter significantly changes the liquid flow pattern and gas dynamics, resulting in different amounts of the gas inside the column. Different ANFIS structures were selected for precise estimation of gas hold-up, TKE and axial liquid velocity. Eventually, the mathematical correlations of the proposed ANFIS approaches are presented with correlation coefficients of 0.9717, 0.9917 and 0.9877 for gas hold-up, turbulent kinetic energy and axial liquid velocity prediction models. Hence, the ANFIS approach is able to provide a prediction of the 3D bubble column hydrodynamics in a continuous domain.
Heat transfer behavior in a 2-D square lid-driven cavity has been studied for various pertinent Reynolds and Rayleigh numbers. The lattice Boltzmann method, a numerical tool based on the particle distribution function is applied to simulate a thermal fluid flow problem. Bhatnagar-Gross-Krook (BGK) is combined with the double population thermal Lattice Boltzmann model to solve mixed convection in a square cavity. An adaptive-network-based fuzzy inference system (ANFIS) method is trained and validated using BGK Lattice Boltzmann model results. The results show that the trained ANFIS model successfully predicts the temperature and flow fields in a few seconds with acceptable accuracy.
This work presents a 2D simulation study of a mixed-mode magnetorheological (MR) damper in which the influence of the geometric elements of the piston and magnetic coil on the MR damper's performance is investigated by using the Ansoft Maxwell software tool. Four results of the simulation, which are magnetic flux density (B), MR fluid yield stress (τ0), and are used to compare the performance of the MR damper. Multiplication of the yield stress by the active operating mode length represents the variable portion of the active (on-state) damping force of the flow mode motion, while the value of represents the active damping force of the shear mode motion. The contribution of each operating mode (shear and flow) is related to the mixed-mode geometry and piston velocity. Therefore, each operating mode is evaluated separately. In this work, a total of 154 simulations are done in which 74, 20 and 60 simulations are conducted to analyse the effect of the piston radius, coil dimensions (width and length) and coil boundary lengths, respectively, on the performance of the MR damper. The simulation results show that increasing the piston radius can increase the value and reduce the value. For a given area of magnetic coil housing, a greater housing length in the axial direction of the piston can increase the achieved yield stress of the MR fluid and hence consequently the performance of the MR damper. A minimum boundary length is needed around the magnetic coil in order to attain a supreme magnetic field distribution. However, there is an optimised value for axial coil boundary lengths, which are the lengths of the upper and lower mixed-mode areas.