An artificial muscle capable of shape programmability, deformation-locking capacity without needing continuous external energy, and self-sensing capability is highly desirable yet challenging in applications of reconfigurable antenna, deployable space structures, etc. Inspired by coupled behavior of the muscles, bones, and nerve system of mammals, a multifunctional artificial muscle based on polydopamine-coated liquid crystal elastomer (LCE) and low–melting point alloy (LMPA) in the form of a concentric tube/rod is proposed. Thereinto, the outer LCE is used for reversible contraction and recovery (i.e., muscle function); the inner LMPA in the resolidification state is adopted for deformation locking, and that in the melt state is adopted for angle variation monitoring by detecting resistance change (i.e., bones and nerve functions, respectively). The proposed artificial muscle demonstrates multiple performances, including controllable bending angle, position, and direction; deformation locking for supporting heavy objects; and real-time monitoring of angle variation, which also provides a straightforward and effective approach for designing soft devices.
Metasurfaces have shown their great capability to manipulate electromagnetic waves. As a new concept, reconfigurable metasurfaces attract researchers’ attention. There are many kinds of reconfigurable components, devices and materials that can be loaded on metasurfaces. When cooperating with reconfigurable structures, dynamic control of the responses of metasurfaces are realized under external excitations, offering new opportunities to manipulate electromagnetic waves dynamically. This review introduces some common methods to design reconfigurable metasurfaces classified by the techniques they use, such as special materials, semiconductor components and mechanical devices. Specifically, this review provides a comparison among all the methods mentioned and discusses their pros and cons. Finally, based on the unsolved problems in the designs and applications, the challenges and possible developments in the future are discussed.
12 November 2018 in IEEE Antennas and Wireless Propagation Letters
In this letter, an active metasurface for vortex beam generation is proposed. This metasurface can transform the incident plane wave into beams carrying orbital angular momentum (OAM) of three different orders. This active metasurface is composed of an array of varactor diodes loaded unit cells. The transmission phase of each metasurface unit cell can be fully controlled by the capacitance of the varactor diodes. Different modes of vortex beams can be separately generated by simply changing the transmission phase distribution on the metasurface aperture. The properties of the proposed active metasurface are demonstrated by simulation and measurement results, which have a good agreement with each other.
In this paper, we report on the design, fabrication and subsequent investigation of a broad band cross polarization converter based on a C2-symmetric ring/disk cavity. Different plasmon hybridization modes are excited in the ring/disk cavity and enable the polarization manipulations. The designed cross polarization converter can convert the x or y polarized incident wave to its cross polarized wave in the frequency range from 9.65 to 14.16 GHz with a bandwidth of ~38% of the central wavelength and an efficiency higher than 80%. At 9.25 GHz and 14.35 GHz, the x (y) polarized incident wave is converted to a left (right) handed and right (left) handed circularly polarized wave, respectively.
28 March 2022 in IEEE Transactions on Antennas and Propagation
A kind of transmission–reflection-integrated elements and metasurfaces (MSs) are proposed to achieve full-space manipulation of amplitudes, phases, and polarization states of electromagnetic (EM) waves. The elements of MSs are designed to control the reflection and transmission under the same incident wave. By introducing an amplitude–phase regulation structure to each element, the amplitudes, phases, and polarization states of reflection and transmission can be simultaneously controlled by three geometric parameters of the proposed elements, respectively. To demonstrate the abilities of elements to regulate EM waves, the MSs working in the reflection mode, transmission mode, and transmission–reflection-integrated mode are designed and simulated, and their simulation results verify the designs. The transmission–reflection-integrated MS is also fabricated and experimentally measured. Its simulation and measurement results show that deflective vortex beams with different values of topological charge can be generated simultaneously and independently in both the reflection and transmission modes.
12 February 2018 in IEEE Microwave and Wireless Components Letters
In this letter, a low-profile bandpass frequency-selective surface (FSS) that is independent of incident angle and polarization is proposed. This FSS is composed of two identical metallic convoluted cross slot layers with vertical metal vias. The whole structure is ultrathin with a thickness of 0.042λ, where λ represents the resonant wavelength in free space. This FSS works as a spatial bandpass filter and exhibits great resonant stability with incident angle ranging from 0° (normal incident) to 75° for both transverse electric (TE) and transverse magnetic (TM) polarizations. At 75° oblique incidence, the resonant frequency deviation is about 0% and 2.02% for TE and TM polarizations, respectively. To verify the design, a prototype of the FSS was fabricated. The measured transmission responses agree reasonably with that of the simulated ones.