The study explores the perforating shear performance of Fiber-Reinforced Polymer (FRP) concrete blocks using machine learning techniques like Gradient-Boosted Regression Trees (GBRT), k-nearest Neighbours (KNN), and Lasso Regression. It aims to predict the structural integrity of FRP blocks under shear conditions based on experimental data. The models were assessed using Coefficient of Determination (R2), Root Mean Square Error (RMSE), and Mean Absolute Error (MAE). GBRT demonstrated superior performance during training with an R2 of 0.9786, RMSE of 52.75, and MAE of 34.12, indicating strong predictive accuracy and minimal error. It outperformed KNN (R2 = 0.92, RMSE = 83.91, MAE = 45.71) and Lasso Regression (R2 = 0.71, RMSE = 162.45, MAE = 115.83). In validation, GBRT again excelled with an R2 of 0.93, RMSE of 76.23, and MAE of 58.46, confirming its robustness in generalizing unseen data. KNN showed lower performance in validation (R2 = 0.86), with increased error values, while Lasso lagged further behind (R2 = 0.681, RMSE = 185.23, MAE = 138.34). GBRT consistently outperformed traditional regression methods, highlighting its potential for more accurate and reliable structural analysis in FRP concrete slabs.
The vulnerability of concrete to micro cracking reduces its strength and durability. The inclusion of bacteria in concrete would provide solution for this problem as the bacteria automatically heals the cracks in concrete without any human intervention. The primary objective of this research work is to study the influence of Bacillus licheniformis BSKNAU on the strength and durability of concrete with cement replaced by silica fume and metakaolin in three replacement levels. Experimental investigations were carried out to study the effect of Bacillus licheniformis BSKNAU on the strength properties of bacterial and control concrete specimens. Durability tests were also conducted on bacterial and control concrete specimens. The strength tests revealed that bacterial concrete specimens exhibited high strength properties and good durability performance. The presence of calcite precipitates in bacterial concrete specimens was examined using a Scanning Electron Microscope and were confirmed using X ray Diffraction and Energy Dispersive X-ray Analysis.
This study explores the potential of using foundry sand (FS) as a partial replacement for manufactured sand (M Sand) in conventional concrete, aiming to enhance sustainability in construction practices. The experimental program involved creating concrete mixes using ordinary Portland cement (OPC), coarse aggregate (CA), M Sand, and a constant 1% superplasticizer (SP). The control mix consisted of OPC, CA, M Sand, and 1% SP. Subsequent mixes incorporated FS at replacement levels of 5%, 10%, 15%, 20%, 25%, and 30% of the M Sand by weight. The study assessed the workability, compressive strength, and durability of the concrete mixes. Results showed that FS inclusion up to 25% significantly improved the concrete’s properties, including enhanced compressive strength and durability, suggesting FS as a viable alternative to M Sand. This research not only promotes the use of industrial byproducts but also addresses environmental concerns related to foundry waste management, contributing to the development of eco-friendly construction materials. By utilizing foundry sand, the construction industry can reduce its reliance on natural sand resources, promoting sustainable practices and reducing the environmental footprint.