The healthcare sector is now blending with Information and Communications Technology (ICT) using Internet of Things (IoT) to potentially minimise medical errors and reduce healthcare cost. Patients are now embedded with smart devices like body sensors and wearable devices which can monitor their health without the need for a doctor in physical contact. Such smart devices have the downside of low battery power and are unable to transmit their data to the medical personnel when the patient is on the move away from the smart home/smart clinic fixed gateway. A mobile gateway is required which moves with the patient to process the smart device data without depleting the smartphone battery. This paper proposes an Intelligent and Energy Efficient SG based smartphone Gateway for healthcare smart devices (IEE5GG). In IEE5GG, the 5G architecture is adopted and the patient's smartphone is used as a gateway where multiple smart devices are connected e.g. via Bluetooth. To save energy, requests to the smartphone can either be executed on the smartphone gateway or offloaded and executed in the Mobile Edge Computing (MEC) cloud at close proximity to the smartphone in the 5G Base Station (BS) central Unit (gNB-CU) while considering the transmission power, Quality of Service (QoS), smartphone battery level and Central Processing Unit (CPU) load. Results show that the proposed IEE5GG framework saves up to 38% of energy in the healthcare mobile gateway smartphone and reduces healthcare application service time by up to 41%.
To achieve a reliable and robust system for environmental monitoring, there is an available technology that can be used to resolve this problem and moreover provide for better living. Wireless sensor networks (WSN) have been successfully applied in many environmental monitoring. An ad-hoc wireless sensor network consists of a number of small and self-power sensing devices (nodes) connected using effective wireless networks. Compared to wired networks, there are several challenges that must be addressed in wireless networks. These challenges are limitation in communication bandwidth and energy constraint in sensor node, therefore it is important to know their reliability and performance. This paper reports the development and performance analysis of an embedded wireless sensor network for temperature and humidity monitoring in the environment. The network itself consists of a coordinator or data gateway which wirelessly collect temperature and humidity data from several sensor nodes that are responsible to provide those data. Each sensor node is developed from an Arduino based microcontroller, Xbee wireless module based on ZigBee/IEEE 802.15.4 standards, and temperature and humidity sensor devices. The network quality of service (QoS) is investigated in terms of delay, throughput and packet loss as a function of sensor node distance and transmitted packet size over line of sight (LOS) and non-line of sight (NLOS) conditions. The throughput and packet delay are also measured as a function of the baud rate in point to point link. This experiment is performed to have an insight how the baud rate affects the latency of the communication over the ZigBee protocol. Next, we also considered the multi-hop scenario with the presence of router for relaying packets from the sensor node to the coordinator. The performance of multi-hop configuration is compared to that of direct transmission. Based on our analysis, it is concluded that the ZigBee based WSN is more suitable for low data rate applications.
18 December 2024 in IEEE Open Journal of the Communications Society
WiFi fingerprinting based on the Received Signal Strength Indicator (RSSI) is a widely used technique for indoor localization. However, achieving the necessary precision for most smart applications has proven difficult due to various challenges, including the time-varying characteristics of indoor RSSI, device heterogeneity, and ambiguity in the positional fingerprints. To address these concerns, Artificial Intelligence (AI) techniques such as Machine Learning (ML) and Deep Learning (DL) have been used to classify and predict indoor locations. While these techniques have shown promising results, they face two significant challenges. First, their complex multilayer architecture requires extensive training iterations. Second, the distribution of the input layer fluctuates as the networks parameters are updated. In this study, we propose a WiFi indoor localization framework based on Recursive Feature Elimination with Cross-Validation (RFECV) and Deep Neural Network with Batch Normalization (DNNBN). The CV process is repeated multiple times to assess the RFEs generalization ability for optimal feature selection, and the BN algorithm is integrated into each layer of the DNN to ensure consistent activation value distribution and stabilization of the training process. Two datasets were used to assess the performance of the proposed RFECV-DNNBN method. The results show that the method addresses the challenges faced by existing AI techniques and outperforms current methods in classification and regression tasks. Our proposed framework achieved 100% accuracy in building classification and 94.69% and 96.39% in floor classification on the UJIIndoorLoc and UTSIndoorLoc datasets, respectively, demonstrating its effectiveness. Additionally, it achieved a Mean Absolute Error (MAE) of 5.08 m and 4.29 m for the respective datasets, highlighting its potential in multi-floored environments.
The use of Information and Communications Technology (ICTs) in healthcare has the potential of minimizing medical errors, reducing healthcare cost and improving collaboration between healthcare systems which can dramatically improve the healthcare service quality. However interoperability within different healthcare systems (clinics/hospitals/pharmacies) remains an issue of further research due to a lack of collaboration and exchange of healthcare information. To solve this problem, cross healthcare system collaboration is required. This paper proposes a conceptual semantic based healthcare collaboration framework based on Internet of Things (IoT) infrastructure that is able to offer a secure cross system information and knowledge exchange between different healthcare systems seamlessly that is readable by both machines and humans. In the proposed framework, an intelligent semantic gateway is introduced where a web application with restful Application Programming Interface (API) is used to expose the healthcare information of each system for collaboration. A case study that exposed the patient's data between two different healthcare systems was practically demonstrated where a pharmacist can access the patient's electronic prescription from the clinic.
Deployment of femtocell in macrocell cellular network which forms two-tier femtocell-macrocell cellular network faces more complicated interference problems, since it uses the same licensed frequency spectrum as its macrocell. This paper addresses the interference problems for downlink transmission in such two-tier cellular communication network. In this paper, interference management using power control is proposed in that two-tier network. This paper considers multi-cell cellular network composing of three macrocell systems. Ten femtocells are deployed in each macrocell system. This paper takes worst case for the scenario that is all femtocells and macrocells in downlink transmissions. Simulation for the system without power control was carried out first as a baseline system. Then, two methods of power control called as PC-1 and PC-2 in this paper were explored to reduce the interference effects. The use of two power controls is to take a trade-off, the increasing of quality of service (QoS) in macrocell system while is not degrading much QoS in femtocell system. Both power control methods are based on the estimated Signal to Interference Plus Noise Ratio (SINR). Both of power control methods also ensure that the results of controlled transmitting power will not exceed the maximum or the minimum of allowable transmitting powers. Simulations have been carried out and performance parameter in term of Cumulative Distribution Function (CDF) of SINR have been collected for co-tier (femtocell-femtocell and macrocell-macrocell), cross-tier (femtocell-macrocell and macrocell-femtocell), and the total interferences. The simulation results show that both power control methods outperform the baseline system.
Femtocell is a small cell of 10-30 meters radius deployed in the existing larger cell (macrocell) forming two-tier femtocell-macrocell cellular network. However, the deployment of femtocell into the existing macrocell cellular network is facing more complex interference problems. This paper focuses on interference management using power control methods for the uplink transmission of such two-tier cellular networks. Types of interferences considered in this paper are co-tier (femtocell-to-femtocell and macrocell-to-macrocell), cross-tier (femtocell-to-macrocell and macrocell-to-femtocell), and total interferences. This paper considers multi-cell scenario of cellular communication network consisting of three macrocell cellular networks in which each macrocell is deployed 10 femtocells. This paper analyzes one of three macrocells on the uplink transmission with the other two macrocells on downlink transmissions. All femtocells are on the same transmission conditions as its co-located macrocells. This paper observes one of ten uplink femtocells on the observed uplink macrocell. Through simulation, this paper firstly analyzes co-tier, cross-tier, and total interferences for the system without power control. The results of Signal to Interference plus Noise Ratio (SINR) in term of its Cumulative Distribution Function (CDF) for the system without power control are used as a baseline system. Then, this paper proposes the use of two power controls namely PC-1 and PC-2 in this paper which both power controls work based on the estimated current SINR. Both power control methods are also to make sure that the transmitting power of the users in the observed base stations (eNB/HeNB in 4G cellular network terminology) will not exceed maximum or minimum of its allowed transmitting power (uplink transmission case). The simulation has been carried out and the SINR results were collected and compared to baseline system. The simulation results show that PC-1 and PC-2 outperform the baseline system in terms of CDF of SINR.