张涛 张

Mr. 张涛 张


Research Focus & Metrics

Academic Career Length

2Years (2025-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
25 November 2025 in Materials
Verified
Journal Article
Open access
PDF file
Jing HanJing Han
Jing Han
ZYZha Yongzheng
Zha Yongzheng
张张张涛 张
张涛 张
HSHaiyong Shi
Haiyong Shi
张兴张 兴越
张 兴越
JZJiyun Zhao
Jiyun Zhao
Fabrication of gradient nanostructure on metal surfaces is recognized as an effective approach for enhancing mechanical and surface properties, as well as serving as a pretreatment for subsequent surface engineering. Unfortunately, their fabrication on high-strength and low-ductility metal surface poses a significant challenge due to the prevalent issue of process-induced surface damage. In this study, we report the successful fabrication of a gradient nanostructured surface layer with low roughness (Ra ~ 0.17 μm) on high-strength 38CrMoAl steel through an optimized ultrasonic severe surface rolling (USSR) processing. By systematically varying the tempering temperature of quenched-and-tempered samples, the strength and ductility of the 38CoMoAl steel are tailored to facilitate gradient nanostructure formation. Microstructural analysis via advanced electron microscopy reveals the gradient nanostructure features progressively coarser martensite/ferrite grains and decreasing dislocation density along the depth. As the tempering temperature increases from 600 °C to 700 °C, the yield strength of 38CrMoAl steel decreases from 915 ± 16 MPa to 815 ± 16 MPa, while the elongation increases from 18.7 ± 0.6 to 27.3 ± 1.2%, resulting in an increase in the thickness of the gradient nanostructured surface layer from 300 μm to 400 μm. Following USSR processing, samples tempered at 600 °C, 650 °C, and 700 °C exhibit significant enhancements in surface hardness by 7.3%, 22.7%, and 21.5%, respectively, along with substantial reduction in wear volume by 73%, 78%, and 60%. USSR processing also leads to a reduction in coefficient of friction. This work provides valuable insights into the fabrication of high-quality gradient nanostructures on high-strength, low-ductility metallic materials.

1 May 2025 in Metals
Verified
Journal Article
Open access
PDF file
Jing HanJing Han
Jing Han
张张张涛 张
张涛 张
BZBin Zhang
Bin Zhang
JZJing Zhang
Jing Zhang
JZJiyun Zhao
Jiyun Zhao
This study introduces a novel gradient dual-phase structure design in brass, achieved through ultrasonic severe surface rolling (USSR) processing, which enables an unconventional asymmetric bilayer structure—comprising a hardened surface layer (>1 mm thick) and a ductile substrate—distinct from conventional hard-soft-hard sandwich configurations in gradient nanostructured materials. Microstructural characterization reveals a gradient dual-phase (α + β′) structure in the hardened layer, progressively transitioning into a homogenized dual-phase structure in the substrate. This unique architecture endows the USSR brass with exceptional mechanical properties, including a yield strength of 582.4 ± 31.0 MPa, ultimate tensile strength of 775.3 ± 33.9 MPa, and retained ductility (9.3 ± 1.0%), demonstrating an outstanding strength-ductility synergy. The USSR brass also demonstrates superior wear resistance with a 42.32% reduction in wear volume and 40.82% decrease in coefficient of friction compared to its as-received counterpart under oil lubrication. This architectural paradigm establishes a robust framework for engineering high-performance brass that simultaneously achieve an exceptional strength-ductility balance and enhanced wear resistance.